001 - 1 | REDARC TECH TIPS

The ABS plastic side mount is designed to attach single or multiple solar panels to a RV or boat.

This installation guide instructs how to use REDARC SMI9001, SMI9002, SMI9003 or SMI9007

ABS mounts to attach single or multiple solar panels to the roof of a boat or RV without drilling,

tomaintain seal integrity.

Read the Fixed Solar Panel and Sikaflex product use instructions.

Check that you have everything you need. Additional items are required to complete this installation and are not included

with the product. The installer must supply all parts, tools and fasteners required for the individual installation configuration.

 Adhesive: Sikaflex 252

 ABS Plastics surface primer: Sika Primer 215

FITTING THE ABS

MOUNTS

1. Prime roof surface with

Sika Primer 206 G+P.

Thesurface canbepainted

or fiberglass.

2. Prime the mounting

brackets mating surface

with SikaPrimer215.

3. Set packers/double sided

Sikaflex 252 tothe ABS

mount, then put in place

and press down.

5. Hold in place until the

Sikaflex bonds (unless

double-sided tape has

been used).

6. Let the Sikaflex cure for the

required amount of time.

REDARC TECH TIPS | Installing REDARC ABS Mounts for Fixed Monocrystalline Solar Panels | 1