Hagor 8716 Installation guide

Brand
Hagor
Model
8716
Type
Installation guide

Hagor 8716 is a versatile gas lift monitor arm designed to enhance your workspace ergonomics and productivity. With its sturdy construction, it can support monitors weighing up to 9 kg (19.8 lbs). Adjust the screen's height, tilt, and swivel angles to find the most comfortable viewing position. The integrated cable management system keeps your workspace neat and organized. Whether you're a professional, student, or casual user, this monitor arm offers a user-friendly and efficient solution for your desktop setup.

Hagor 8716 is a versatile gas lift monitor arm designed to enhance your workspace ergonomics and productivity. With its sturdy construction, it can support monitors weighing up to 9 kg (19.8 lbs). Adjust the screen's height, tilt, and swivel angles to find the most comfortable viewing position. The integrated cable management system keeps your workspace neat and organized. Whether you're a professional, student, or casual user, this monitor arm offers a user-friendly and efficient solution for your desktop setup.

HAGOR Products GmbH | Oberbecksener Straße 97 | D-32547 Bad Oeynhausen | Telefon: +49(0)57 31-7 55 07-0 | Mail: hagor@hagor.de
Installationsanleitung
HA Gasliftarm Medium Dual
Art.-Nr.: 8716
DE Installationsanleitung
ES Guía de instalación
GB Installation manual
FR Guide d‘installation
SE Installationsanvisning
TR Yükleme Rehberi
RU инструкция по установке
NL Installatievoorschrift
CN 安装指南
HAGOR Products GmbH | Oberbecksener Straße 97 | D-32547 Bad Oeynhausen | Telefon: +49(0)57 31-7 55 07-0 | Mail: hagor@hagor.de
DE
GB
Achtung!
Technische Geräte stellen einen beträchtlichen Wert dar. Sie sollten daher bei
der Installation vorsichtig mit den Komponenten umgehen und diese bei Bedarf
schützen.
Auch sollte, falls nötig, der Installtionsbereich abgesichert werden. Herabfallen-
de Teile können zu Verletzungen und Materialschäden führen.
Die im Lieferumfang enthaltenen Materialien sind unter Umständen nicht für die
speziellen Gegebenheiten am Installationsort geeignet. Bitte prüfen Sie dies
vorab und ersetzen Sie diese bei Bedarf durch geeignete Materialien.
Falls Sie Bezüglich der Installation des Produkts unsicher sind oder noch Fra-
gen haben wenden Sie sich an uns oder anderes ausgebildetes Fachpersonal.
Caution!
Technical devices are of considerable value. You should therefore handle the
components carefully during installation and protect them if necessary.
If necessary, the installation area should also be secured. Falling parts can cause
injuries and material damage.
The materials included in the scope of delivery may not be suitable for the spe-
cial conditions at the installation site. Please check this in advance and replace it
with suitable materials if necessary.
If you are unsure about the installation of the product or have any questions,
please contact us or other trained specialists.
HAGOR Products GmbH | Oberbecksener Straße 97 | D-32547 Bad Oeynhausen | Telefon: +49(0)57 31-7 55 07-0 | Mail: hagor@hagor.de
Lieferumfang | Scope of delivery
HAGOR Products GmbH | Oberbecksener Straße 97 | D-32547 Bad Oeynhausen | Telefon: +49(0)57 31-7 55 07-0 | Mail: hagor@hagor.de
1 Montage an der Tischkante | Installation on open edge of work surface
2 Zusammenbau der Gasliftarm-Segmente | Assembly of the gas lift arm segments
Setzen Sie die untere Gasliftarm-Segment in die Basis ein und ziehen Sie die Schraube (A)
mit dem Inbusschlüssel fest. Setzen Sie danach die oberen Gasliftarm-Segmente ein.
Insert the lower arms into the Base Stern, tighten the screw (A) by Hex Key.
Attach the upper arms.
HAGOR Products GmbH | Oberbecksener Straße 97 | D-32547 Bad Oeynhausen | Telefon: +49(0)57 31-7 55 07-0 | Mail: hagor@hagor.de
3 Montage der VESA-Aufnahme | Installation of the VESA mounting plate
HAGOR Products GmbH | Oberbecksener Straße 97 | D-32547 Bad Oeynhausen | Telefon: +49(0)57 31-7 55 07-0 | Mail: hagor@hagor.de
4
1 2 3
Kabelmangement | Cable management
HAGOR Products GmbH | Oberbecksener Straße 97 | D-32547 Bad Oeynhausen | Telefon: +49(0)57 31-7 55 07-0 | Mail: hagor@hagor.de
Einstellungen vornehmen | Adjustment5
Einstellung Neigung
Adjust pitching angle
Einstellung Schwenken
Adjust horizontal angle
Einstellung Gerätegewicht
Weight adjustment
HAGOR Products GmbH | Oberbecksener Straße 97 | D-32547 Bad Oeynhausen | Telefon: +49(0)57 31-7 55 07-0 | Mail: hagor@hagor.de
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Hagor 8716 Installation guide

Brand
Hagor
Model
8716
Type
Installation guide

Hagor 8716 is a versatile gas lift monitor arm designed to enhance your workspace ergonomics and productivity. With its sturdy construction, it can support monitors weighing up to 9 kg (19.8 lbs). Adjust the screen's height, tilt, and swivel angles to find the most comfortable viewing position. The integrated cable management system keeps your workspace neat and organized. Whether you're a professional, student, or casual user, this monitor arm offers a user-friendly and efficient solution for your desktop setup.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers