Page is loading ...
Item # __________________________
C.S.I. Section 11420
VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201, TEL. 1-800-814-2028
502-778-2791 QUOTE & ORDER FAX: 1-800-444-0602
A2780
ISO9001
Vulcan-Hart Co.
F-31529 (10-03)
SPREADER PLATES
For Heavy Duty Gas Equipment
SPREADER PLATES
FOR HEAVY DUTY GAS EQUIPMENT
STANDARD FEATURES
■ 12 gauge polished stainless steel top work surface.
■ Stainless steel front.
■ One year limited parts and labor warranty.
OPTIONS
■■ Stainless steel side(s).
■■ Stainless steel finishing back (GSE17D only).
■■ 1
5
/8" stainless steel toe base. 31
5
⁄8" working height.
■■ Set of four casters (two locking).
■■ 1
1
⁄4" rear gas connection. (Reference spec sheet F-31525.)
ACCESSORIES
■■ 17" high stainless steel backguard. (Common backguards
available up to 68" wide.)
■■ 23" high stainless steel single deck high shelf. (Common high
shelves available up to 68" wide.)
■■ 35" high stainless steel double deck high shelf. (Common high
shelves available up to 68" wide.)
■■ 1
1
⁄4" gas pressure regulator. (Specify type of gas.)
■■ 1
1
⁄4" x 5 ft. flexible gas hose with quick disconnect and restrain-
ing device.
SPECIFICATIONS:
Full body spreader, Vulcan-Hart Model No. ■■ GSE08D
(8
1
/2" wide), ■■ GSE17D (17" wide), with stainless steel top plate,
backsplash, front manifold panel and front body panel(s). Sides
finished in heat resistant paint. 6" adjustable stainless steel legs.
1
1
⁄4" diameter front gasmanifold. (17" units provide concealed
storage area.)
NSF listed.
GSE17D
"GSE" Series Full Body Unit
Printed On Recycled Paper
VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201, TEL. 1-800-814-2028
502-778-2791 QUOTE & ORDER FAX: 1-800-444-0602
NOTE: In line with its policy to continually improve its products, Vulcan-Hart Company reserves the right to change materials and
specifications without notice.
F-31529 (10-03)
SPREADER PLATES
FOR HEAVY DUTY GAS EQUIPMENT
(Measurements shown in parenthesis are in millimeters)
NOTE: GSD SPREADERS RELY ON ADJACENT EQUIPMENT FOR
SUPPORT. GSE SERIES SPREADERS ARE OF RANGE TYPE
CONSTRUCTION WITH COMPLETE BODY AND DOOR(S).
SPREADERS MATCH RANGE CONTOURS, COOKING HEIGHTS, ETC.
/
