Trendnet TV-M7 User guide

-1-

Table of Contents

Package Contents…………………………………………………………………………4

Hardware Interface…………………………………………………………………….…. 5

Remote Control Functions………………………………………………………….….….7

Virtual Keyboard Functions………………………………………………………….…....9

IP Cameras & Network …………………………………………………………………..10

IP Cameras ………………………………………………………………………11

Flickr® / Picasa™ ……………………………………………………………….13

NAS ……………………………………………………………………………….14

Internal Memory …………………………………………………………………………..16

Photos ……………………………………………………………………………..17

Music ……………………………………………………………………………....18

Video ………………………………………………………………………………19

Calendar/Time ……………………………………………………………………20

-2-

Settings ……………………………………………………………………………..……. 21

System Setup ………………………………………………………………….... 22

Slideshow Setup ………………………….………………………………...…..23

A/V Setup …………………………………………………………………….…....24

Calendar/Time/Alarm Setup ………………………………………………….... 25

Copy/Delete File ……………………………………………………………….... 26

Auto Play Setup …………………………………………………………….…..…27

Networking Setup …………………………………………………………….…...28

Web Album Setup ……………………………………………………………….. 30

NAS Setup ………………………………………………………………….......... 31

Display Setup …………………………………………………………………….. 32

Memory Card

Photos ………………………………………………………………………….…...33

Music ………………………………………………………………………..............34

Video ……………………………………………………………………………..…35

-3-

PC Connection ………………………………………………………………………….…36

PC ……………………………………………………………………………….…37

Mac …………………………………………………………………………….…..38

General Usage

Starting the Slideshow………………………………………………………….…40

Zooming & Rotating Photos………………………………………………….….. 41

Returning to Main Menu……………………………………………………….….42

Calendar Display…………………………………………………………………..43

Connecting Wireless Network …………………………………………………...44

Set Homepage to Camera View……………………………………...………….48

Firmware Upgrade ………………………………………………………………..49

-4-

Package Contents

(1) Camera Monitor (2) Power Adapter (3) USB Cable (6) CD-ROM

(4) Remote Control (5) Stand (6) Quick Installation Guide

-5-

Hardware Interface

(1) Power Switch

(2) LED Indicator: Power

(A steady GREEN light confirms that the device is

powered on.)

(3) LED Indicator: Network

(A flashing GREEN light confirms that there is

network traffics.)

(4) Navigation buttons (Up/Down/Left/Right)

(5) ESC button

(6) ENTER button

(7) Remote Sensor

(8) 7" TFT LCD panel

-6-

Hardware Interface

(9) SD/MMC/MS/MS Pro/XD Card Slot

(10)

Audio OUT Jack

(11) USB Port

(12) DC IN Jack

(13) Reset Button

Note: The device supports up to 16GB memory card.

Tip: If you have a MS Pro Duo card, you will need an adapter to install

the card.

-7-

Remote Control Functions

(1) HOME: Return to the Device Selection screen.

(2) SETUP: Pop up an onscreen Setup menu window.

(This button will not work during the slide show)

(3) SNAP SHOT: Capture an image from the IP camera.

(4) ESC: Return to the previous screen.

(5) PHOTO/MUSIC: While viewing a photo, press this button to

start the slide show with background music (if available).

(6) NAVIGATION (Up/Down/Left/Right)/ENTER buttons:

z Use the NAVIGATION buttons to select items, and press

the ENTER button to confirm your selection.

z While viewing the photo, press

/ to view the next

photo or / to view the previous photo

-8-

The Remote Control

(7) ROTATE/REFRESH:

z While viewing a photo, press the button to rotate the displayed photo 90˚ clockwise.

z Refresh the connected IP camera list while in network status.

(8) ZOOM/SELECT:

z Zoom in on a photo. You may zoom five times before returning to normal.

z Select the IP camera you want to monitor from the list while in network status.

(9) Volume Control: While playing music and video, press

/ to decrease/increase the volume;

press

to mute.

(10) IP CAM: Access the image of the connected IP camera.

(11) CALENDAR: Show the calendar with your photo and music.

(12) Playback Control: While playing music and video, press

to start/pause; press to stop. While

playing video, press

/ to fast backward / forward.

-9-

The Virtual Keyboard

Al

p

hake

y

s

Backspace

Toentercharacters,useNAVIGATIONbuttonsto

findthedesirecharactersandpressENTERto

selectfromtheRemoteControl.



NumericKeys:Numbers0~9.

AlphaKeys:LettersA~Zora~z.

Space:Insertspacebetweencharacters

CapsLock:Allowuserstoswitchbetweenlower

caseanduppercaseletters.

Backspace:Use

backspacekeytoclearthe

enteredcharacters.

Shift:Allowuserstochangeletterstosymbols,

hitShifttoswitchback.

Enter:Afterallthecharactersareinserted,hit

Entertoacceptandexitthevirtual

keyboardsection.



Numericke

y

s

Enter

Space

CapsLock

Shift

-10-

IP Cameras & Network

When you connect the TV-M7 to your network and you have set up IP camera(s) within the network. You

can use the TV-M7 as a monitor.

Tip: For instructions on connecting the TV-M7 to a wireless network, please refer to “Networking Setup” in the Advanced Features.

Connect the TV-M7 to IP Camera

(1) Plug in the AC adapter, and turn the TV-M7 on.

(2) Connect the TV-M7 to the Wireless Access Point or

Router.

(3) The device will then connect to the Wireless

network and get an IP address from the DHCP

server.

Note: The cameras’ IP address must correspond with the TV-M7’s IP

address in the same segment for the devices to communicate.

-11-

IP Cameras & Network - IP Cameras

View the Image of IP Camera

(4) On the Main Menu, select the IP Cameras and Network

icon and press the ENTER button.

(5) On the following screen, choose the IP Cameras icon

and press the ENTER button.

-12-

IP Cameras & Network - IP Cameras

(6) The IP cameras within the network will be displayed on

the list screen. Select one camera and press the ENTER

button to view the image from the camera.

(7) In the list, you can use the ZOOM/SELECT button (

)

on the remote control to select 1 to 4 cameras, so you

can view single or multiple cameras. You can also enter

the camera’s IP address manually by pressing the “IPCAM” button on the remote.

While viewing multiple cameras, you can select the cameras and press the ENTER button to view the

full-screen image of the selected camera; press the NAVIGATION buttons to change the image to a

different camera or press ESC to escape to return to multiple camera view.

After selecting a camera, you are required to input camera’s user name and password prior to viewing.

-13-

IP Cameras & Network - Flickr® or Picasa™

View the Photos of Web Album

(1) Select the Flickr® or Picasa ™ icon from the IP Cameras

& Network menu and press the ENTER button. (Please refer

to the Web Album setups in the Settings section)

(2) The device will start to connect and download photos. Then

it will automatically start the slide show of the photos in the

Web Album.

Note:Thewebalbumaccountsandphotosneedtobesettoallowpublicviewinganddownloading.



-14-



IP Cameras & Network - NAS

Accessing NAS

(1) Select the NAS (Network Attached Storage) icon

from the IP Cameras & Network menu and press

ENTER. (Please refer to the NAS setup in the

Settings section)

(2) The screen will display all the files/folders available

on the NAS system. To access files, use the

NAVIGATION keys on the remote control to select them.

-15-

IP Cameras & Network - NAS

(3) To display images from NAS, go to the desired

folder, select the file and press ENTER

(4) To copy files from NAS to Internal Memory or Memory

Card, select the desired file, press SETUP key on remote

control, go to Copy/Delete File option, select Copy and

choose the proper destination. Then press the ENTER

key.

Note:ThefilescanbecopiedtoInternalMemoryandMemoryCardwhenavailable.TV‐M7doesnotsupportfilesavingtotheNAS

system.

-16-

Internal Memory

(1) Select the Internal Memory icon from the main menu.

(2) You can choose to view Photos, Music, Video or

setup the Calendar/Time.



Note:Built‐inmemorysizeis512MBwith12~16MBreservedfordeviceoperationuse.

-17-



Internal Memory - Photos

(1) When selecting the Photos option, all the files saved

in the Internal Memory will be displayed. Use the

NAVIGATION buttons to select an image and press

ENTER key to display them in full screen.

(Please refer to Settings Æ Slideshow Setup and General

Usage Æ Start the Slide Show)



Note:IfyouareunabletoaccessthesectionafterpressingtheENTERkey,youmightnothav ethephotosavailableinthe

memorycardortheyarenotinthecorrectformat(JPEGorBMP).

-18-

Internal Memory - Music

(1) Select the Internal Memory icon from the main menu.

(2) Select the Music option, all the music files saved

on the Internal Memory will show in the screen. Select

the desire file and press ENTER key to play the music.



Note:IfyouareunabletoaccessthesectionafterpressingtheENTERkey,

thefilesmightnotbeavailableorarenotinthecorrectformat(MP3,MP4,WMA)forplaying.

-19-

Internal Memory - Videos

(1) Select the Internal Memory icon from the main menu.

(2) Select the Video option, all the video files saved

on the Internal Memory will display on the screen. Select

the desire file and press ENTER key to play them.



Note:Ifyouareunabletoaccessthesectionafterpressingthe

ENTERkey,thefilesmightnotbeavailableorarenotinthecorrectformat(MJPEG,MPEG1,MPEG4)forplaying.

Trendnet TV-M7 User guide

Related papers

Other documents