Xtatix XWM-001 User manual

Xtatix Portaclik XWM-001

Wireless Mouse Manual

To put batteries in the mouse, pop off the black cover where your palm rests. The batteries go in there.

The mouse requires two AAA batteries.

1. Plug the USB receiver into the USB port on your computer.

2. Press the button on the receiver.

3. Press the button on the bottom of the mouse to turn it on (it will light up).

And you're set!

To turn it off, press and hold the button on the bottom of the mouse until it blinks once. You may want

to remove the batteries after each use, which is good practice for almost all electronics.