SBX-ISDVFP
Stainless Steel Surface Mount Box
The SBX-ISDVFP is an 18-Gauge stainless steel enclosure designed for surface mounting the
IS-SS/DVF prox and iCLASS reader door stations.
Compatible with the IS-DVF-HID, IS-DVF-HID-I, IS-SS-HID, IS-SS-HID-I, and IS-IP4DVF
-INSTRUCTIONS-
SBX-ISDVFP Instr.
0613JD
Aiphone Corporation
1700 130th AVE NE
Bellevue, WA 98005
(425) 455-0510
Fax: (425) 455-0071
TOLL FREE TECHNICAL SUPPORT:
(800) 692-0200
E-MAIL: [email protected]
MOUNTING INSTRUCTIONS:
1. The SBX-ISDVFP is designed to mount to a 1 or 2-gang
box, ring, or to any at surface.
2. Pass cable through the knockout hole.
3. Secure mounting box to wall.
4. Connect wires to IS door station. (Refer to system’s
installation instructions).
5. Connect supplied speed nuts to mounting tabs. (4 total)
6. Attach door station to mounting box using the tamper
proof screws and tool supplied with this box.
SPECIFICATIONS:
Mounting: 1 or 2-gang box, or surface mount directly to wall
Material: 18-Gauge Stainless Steel
Color: Polished Stainless Steel
Dimensions (HxWxD): 12-7/16” x 7-1/16” x 2-13/16” (top); 1-13/16” (bottom)
Interior depth: 1-5/8”
IS-DVF-HID
Mounting
Tabs
CONTENTS:
- SBX-ISDVFP surface mount box
- #15 Torx Security 1/4” Hex bit
- Qty 4. 8/32 x 1” Torx Security Screws
- Qyt 4. 8/32 Speed Nuts
/