NEC P42XP10-BK is a 42” Plasma Monitor with a resolution of 1024x768 and an aspect ratio of 16:9. It is a Class B FCC certified device with an anti-reflective screen surface. The display dimensions are 40.79” (W) x 25.36” (H) x 5.00” (D) and it weighs 81.6 lbs. The device has a maximum tilt angle of 20 degrees in landscape position and can be connected to various sources such as RGB1, RGBHV, DVI, DVD3/HD3, VIDEO1, VIDEO2, S-Video, DVD1/HD1, and DVD2/HD2. It also has a speaker terminal connection and a control panel with a power switch.
NEC P42XP10-BK is a 42” Plasma Monitor with a resolution of 1024x768 and an aspect ratio of 16:9. It is a Class B FCC certified device with an anti-reflective screen surface. The display dimensions are 40.79” (W) x 25.36” (H) x 5.00” (D) and it weighs 81.6 lbs. The device has a maximum tilt angle of 20 degrees in landscape position and can be connected to various sources such as RGB1, RGBHV, DVI, DVD3/HD3, VIDEO1, VIDEO2, S-Video, DVD1/HD1, and DVD2/HD2. It also has a speaker terminal connection and a control panel with a power switch.
NEC Display Solutions of America, Inc.
P42XP10-BK Installation Guide
42” Plasma Monitor Rev 1.2
www.necdisplay.com
Contents:
Product Description and Notes Page 1
Tilt Angle and Rotation
Page 1
Ventilation Requirements
Page 2
Display Dimensions
Front, Top, Bottom & Right Side Page 3
Rear
Page 4
Cosmetic Colors
Page 4
Display Dimensions w/Optional Speakers and Stand
Page 5
Optional Stand Dimensions
Page 6
Optional Speaker Dimensions
Page 7
Dimensions w/Optional Wall Mount
Page 8
Connections
Page 9
Control Codes
Page 10
Product Description
Type: Plasma Monitor Screen Surface: Anti-Reflective
Resolution: 1024x768 Dimensions: 40.79”(W) x 25.36”(H) x 5.00”(D)
Aspect Ratio: 16:9 Weight: 81.6 lbs
FCC: Class B
Notes
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not intended to
be a step-by step procedure for installation.
Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.
4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally to
fill the screen using the menus (see “Aspect Modes” in menus and user manual).
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary ±5%.
Tilt Angle and Rotation
Below are the maximum angles that the monitor can be tilted in the landscape position only.
Do not install in the portrait position.
Landscape 20deg
Max. 20 deg
P42XP10-BK Page 1 of 10
NEC Display Solutions of America, Inc.
P42XP10-BK Installation Guide
42” Plasma Monitor Rev 1.2
www.necdisplay.com
Ventilation Requirements (all models)
Dimensions below are minimum required for proper ventilation.
WALL
0 to 40 degC
32 to 104 degF
50mm
2”
50mm
2”
P42XP10-BK Page 2 of 10
NOTE: The ventilation space should not be covered or closed off at the front of the opening. If for some reason the
opening needs to be covered, other means of ventilation will need to be incorporated into the design. Contact NEC for
design review and recommendations.
WALL WALL
50mm
2”
50mm
2”
50mm
2”
NEC Display Solutions of America, Inc.
P42XP10-BK Installation Guide
42” Plasma Monitor Rev 1.2
www.necdisplay.com
Display dimensions
LED
IR
AC IN
POWER SWITCH
FILTER PANEL SURFACE
TOP VIEW
RIGHT SIDE VIEW
BOTTOM VIEW
36.28 (PANEL DISPLAY AREA)
2
0
.
4
3
(
P
A
N
E
L
D
I
S
P
L
A
Y
A
R
E
A
)
1.6237.541.62
1
.
8
0
2
1
.
7
2
1
.
8
0
2
5
.
3
6
40.79
19.70
2
.
8
0
0.51
0
.
8
8
14.80 3.23
2.36
0
.
4
7
16.51
2
.
4
6
18.50 (TERMINAL PANEL)
1
.
5
3
3
.
2
8
5
.
0
0
30.31
34.33
36.69
38.27
1
1
.
8
5
9
.
6
0
2
.
0
0
0.87
0.40 0.33
9
.
4
0
0
.
1
2
P42XP10-BK Page 3 of 10
NEC Display Solutions of America, Inc.
P42XP10-BK Installation Guide
42” Plasma Monitor Rev 1.2
www.necdisplay.com
Display dimensions (cont.)
for MOUNT UNIT
4-M8 Depth 16
for PC
4-M4 Depth 10
Label
REAR VIEW
for SPEAKER
8-M4
23.78 (STAND)
445
700
1
1
.
8
1
0
.
4
4
3
.
5
8
4
.
0
2
4
.
4
0
8
.
2
4
0
.
7
0
7
.
0
0
7
.
0
0
0
.
7
0
0.63
P42XP10-BK Page 4 of 10
NEC Display Solutions of America, Inc.
P42XP10-BK Installation Guide
42” Plasma Monitor Rev 1.2
www.necdisplay.com
Dimensions with optional speakers and stand
3.15 0.04
3.150.04
47.17
2.80
26.50
1
4
.
2
1
1
.
5
0
2
5
.
3
6
16.40
6.80
1
.
5
4
2
.
3
2
5
.
0
0
23.78
6
.
8
3
P42XP10-BK Page 5 of 10
NEC Display Solutions of America, Inc.
P42XP10-BK Installation Guide
42” Plasma Monitor Rev 1.2
www.necdisplay.com
Optional Stand Dimensions (ST-P42P1)
0
.
8
7
1
.
5
6
5
.
9
6
2
.
8
0
3
.
0
0
2
.
2
0
13.60
16.4
0.79
1.77
1
.
7
7
9.66
0.79
Ø 0.39
0
.
0
8
9
0
°
+
1
.
0
°
-
0
.
7
°
Table Top Stand
ST-P42P1
P42XP10-BK Page 6 of 10
NEC Display Solutions of America, Inc.
P42XP10-BK Installation Guide
42” Plasma Monitor Rev 1.2
www.necdisplay.com
Optional Speaker Dimensions (SP-P42P1)
4-M4
INPUT TERMINAL
2
5
.
3
6
3.15 1.54
0.79
1
4
.
7
5
0.79
Optional Speakers
SP-P42P1
P42XP10-BK Page 7 of 10
NEC Display Solutions of America, Inc.
P42XP10-BK Installation Guide
42” Plasma Monitor Rev 1.2
www.necdisplay.com
Dimensions with optional Wall Mount Kit (WMK3260-L)
Label
P42XP10-BK Page 8 of 10
NEC Display Solutions of America, Inc.
P42XP10-BK Installation Guide
42” Plasma Monitor Rev 1.2
www.necdisplay.com
Connections
Speaker Terminal Connections
Located at bottom of display
Control Panel
Power Switch
P42XP10-BK Page 9 of 10
NEC Display Solutions of America, Inc.
P42XP10-BK Installation Guide
42” Plasma Monitor Rev 1.2
www.necdisplay.com
Control Codes
Function Code Data
POWER ON 01 30 2A 30 41 30 43 02 43 32 30 33 44 36 30 30 30 31 03 18 0D
OFF 01 30 2A 30 41 30 43 02 43 32 30 33 44 36 30 30 30 34 03 1D 0D
INPUT SWITCH RGB1 (15pin HD) 01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 31 03 18 0D
RGBHV 01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 32 03 1B 0D
DVI 01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 33 03 1A 0D
DVD3/HD3 (HDMI) 01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 34 03 1D 0D
VIDEO1 01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 35 03 1C 0D
VIDEO2 01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 36 03 1F 0D
S-Video 01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 37 03 1E 0D
DVD1/HD1 01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 43 03 6A 0D
DVD2/HD2 01 30 2A 30 45 30 41 02 30 30 36 30 30 30 30 44 03 6D 0D
AUDIO MUTE ON 01 30 2A 30 45 30 41 02 30 30 38 44 30 30 30 31 03 62 0D
OFF 01 30 2A 30 45 30 41 02 30 30 38 44 30 30 30 30 03 63 0D
PICTURE MODE BRIGHT 01 30 2A 30 45 30 41 02 30 32 31 41 30 30 30 33 03 6E 0D
STANDARD 01 30 2A 30 45 30 41 02 30 32 31 41 30 30 30 34 03 69 0D
CINEMA1 01 30 2A 30 45 30 41 02 30 32 31 41 30 30 30 35 03 68 0D
CINEMA2 01 30 2A 30 45 30 41 02 30 32 31 41 30 30 30 42 03 1F 0D
DEFAULT 01 30 2A 30 45 30 41 02 30 32 31 41 30 30 30 43 03 1E 0D
SCREEN MODE: NORMAL 01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 31 03 1B 0D
FULL 01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 32 03 18 0D
ZOOM 01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 33 03 19 0D
DYNAMIC 01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 34 03 1E 0D
2.35:1 01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 42 03 68 0D
14:9 01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 43 03 69 0D
UNDERSCAN 01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 44 03 6E 0D
TRUE 01 30 2A 30 45 30 41 02 30 32 37 30 30 30 30 45 03 6F 0D
AUTO PICTURE ON 01 30 2A 30 45 30 41 02 30 30 31 45 30 30 30 31 03 6A 0D
OFF 01 30 2A 30 45 30 41 02 30 30 31 45 30 30 30 30 03 6B 0D
FILM MODE ON 01 30 2A 30 45 30 41 02 30 32 32 33 30 30 30 32 03 1E 0D
OFF 01 30 2A 30 45 30 41 02 30 32 32 33 30 30 30 31 03 1D 0D
NOTE: Contact your NEC rep for codes not listed.
NOTE: Use a cross/reverse/null modem cable.
Cable Connection
Communication Protocol:
Interface: RS-232C Parity: None
Communication: Asynchronous Stop Bit: 1 bit
Baud Rate: 9600 bps Communication Code: ASCII
Data Length: 8 bits
PC Control Connector (D-Sub 9P)
NOTE: If so desired, jumper “Request to send” and “Clear to Send” together on both ends of the cable to simplify cable connection.
These connections are not required. The only connections required are pins 2 (RxD), 3 (TxD) and 5 (GND).
P42XP10-BK Page 10 of 10
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
NEC P42XP10-BK is a 42” Plasma Monitor with a resolution of 1024x768 and an aspect ratio of 16:9. It is a Class B FCC certified device with an anti-reflective screen surface. The display dimensions are 40.79” (W) x 25.36” (H) x 5.00” (D) and it weighs 81.6 lbs. The device has a maximum tilt angle of 20 degrees in landscape position and can be connected to various sources such as RGB1, RGBHV, DVI, DVD3/HD3, VIDEO1, VIDEO2, S-Video, DVD1/HD1, and DVD2/HD2. It also has a speaker terminal connection and a control panel with a power switch.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
NEC X754HB Installation guide
-
-
-
-
-
-
NEC VT695 Owner's manual
-
-
NEC LCD4620-2-AV User manual
-