Mode d'Emploi Zoom R16AI Owner's manual

Page is loading ...

Mode d’emploi de l’interface audio

6

Environnement système de l’interface audio R16

Pour utiliser le logiciel DAW avec cette unité, vous devez l’installer et faire ses réglages pour l’employer

avec le R16. L’explication qui suit concerne la procédure avec Cubase LE4.

Veuillez vous référer au guide de prise en main de

Cubase LE 4/USB pour des instructions détaillées

sur l’installation du pilote audio R16 et de Cubase

LE 4.

Conﬁgurations informatiques

requises pour l’interface audio R16

Guide d’installation de Cubase LE 4

“PDF Manuals and Drivers” CD-ROM supplied with R16

Drivers>Windows “Setup.exe”

or

Download the latest “ZOOM R16 Audio Driver” from

ZOOM homepage (http://zoom.co.jp)

and install it on a computer.

ZOOM R16 Au dio Driver software is required t o enable us e of

Cubase LE 4 for au dio input and outp ut with a computer. Refer

to th e re ad_me fil e inc lude d in the d ownl oad p acka ge fo r

instructions on how to install the driver correctly.

[How to install the driver]

Double-click Setup.exe file to activate the installer.

Set language selection

Continued overleaf

Cubase LE 4

Startup Guide

This Cubase LE 4 Startup Guide explains how to install Cubase LE 4 on a computer, make connections and other settings for the R16.

Windows Vista / XP

To connec t the R16 t o a compute r running Wi ndows Vista

(or Windows XP) and to enable audio input/ output, proceed

as follows. Th e installation de scription uses Win dows Vista

as an example.

Insert the su pplied “ Cubase LE 4” DVD-ROM in to

the DVD dr ive of the co mputer.

When you insert the DVD-ROM, a screen a sking what you want

to do appears. Select “Open folder to view files”.

When the cont ents of the DVD-R OM a re s hown , ope n th e

Cubase LE 4 for Window s folder by double-cli cking on it , and

then double-click the executable “Setup” (“Setup.exe”) file to start

the installation process.

Bring up the “Sound” window from the Control Panel

and make the input device setting for the computer.

To bring up the “Sound” window, select “Control Panel” from the

Start menu and click “Hardware and Sound”, then click “Sound”.

In the “Sound” window, verify that “R16 Audio Interface” is liste d

under the Play and Recor d dev ices and that the d evice is

checked. (To switch between Play and Record, click the tabs at

the top of the window.)

If the device is not checked, right-click on the icon for the device

and click “Set as Default Device” so that a check mark appears.

When the connectio n is completed on the R16, it is reco gnized

by the computer.

If this is the first time to conn ect the R16, wait until the messag e

“Your devices are ready to use” appears.

Start “Found New hardware Wizard”

“Found New Hardware Wizard completed”

Click [Finish] to complete installation.

When the c onnec tion opera tion of th e R16 is f inish ed, i t is

recognized by the computer.

When connecting for the first time please w ait until the message

of "The device was able to be prepared" is displayed.

Click [Next ] to start

installation.

If y ou use SON ER,

sel ect In st all ati on

Plug In fo r Co ntr ol

Surface.

Click [Insta ll] to start

installation.

Clic k [C ompl ete ] to

finish installation.

Choo se [No , no t t his

ti m e ] of W i nd o w s

Update and click[Next].

Cho os e [I nst al l th e

software automa tically]

and click [Next]to s tart

installation.

HINT

If noth ing hap pens w hen yo u inser t the DVD-ROM , open the St art

menu and sele ct “Computer ” (“My Compu ter” in Wind ows XP). The n

double-click the “Cubase LE 4” DVD-ROM icon to display the contents

of the DVD-ROM.

NOTE

To use Cubase LE 4 continuously, it is necessary to have the User

Registration and the Software License Authentication. The Registration

and Authentication are available to be processed when Cubase LE 4 is

activated on a computer connected to the internet. Click “Register now”

which is shown when activating, enter all the items. If it is not recognized

as Registration, Cubase LE 4 can only be used for a limited period after

installation.

NOTE

We recommend you upgrade the system software to the latest version on

the R16. An R16 operated on an old system may not be recognized

correctly. The latest version can also be downloaded from our homepage.

NOTE

Use a hi gh-qual ity USB cable a nd keep the con nection as sho rt as

possible . If US B bus p ower is suppli ed to t he R16 v ia a US B cable

which is more tha n 3 mete rs i n le ngth , th e low vol tage war ning

indication may appear.

Choose language and

click [OK].

Set and connect the R16 to the computer

using a USB cable.

Connect USB cable to the R16

Connect USB cable

to computer

75$  

#7 &+1+ 06'4( #%'

Menu moves

Select

#7&+1+06'4(#%'

Press.

#7& +1+0 6'4(# %'

'PV GT!

Execute.

Press.

5CO RNG4 CVG  M*\

U5 QNQ

5'6 6+0)

=%1 06+07 '?4' 5'6

Menu moves

Select of how to continue settings.

Press.

1

2

3

4

5

6

Press.

USB indicator

[DEVICE] flashes

AUDIO INTERFACE flashes

4CVG



 *\

 *\

INTERFACE flashes when the connection is complete Connection setting completed

How to set and connect the R16

Start InstallShield Wizard

Driver-Plug In selection screen

Ready to install the program

If a warning dialogue “Install software” appears, click [Continue].

If a warning dialogue “Windows security Driver Software Licensee

cannot be verified.” appears, click [Install this driver software].

*A message “ZOOM R16 Audio Driver (No Response)” may appear,

but it is not a problem. Wait until it responds.

InstallShield Wizard was completed

DAW software

Cubase LE 4 etc

Windows PC

USB cable

[PHONES]Jack

Audio system,

headphones or other

playback equipment

[OUTPUT]Jack

Audio components,

amp built-in

speakers etc

[INPUT 1-8]Jack

Guitar, other instrument or

built-in stereo mic

R16

ZOOM R16 Audio Driver

If a warning dialogue “Install hardware” appears, click [Continue].

Windows

®

XP SP2 ou ultérieur/Windows

®

Vista SP1

ou ultérieur

Pentium

®

4 Intel

®

1,8 GHz ou plus rapide

1Go de RAM minimum

Mac Intel

OS X 10.4.11 ou ultérieur/10.5 ou ultérieur

Processeur Core

TM

Duo Intel

®

1,83 GHz ou plus

rapide

1Go de RAM minimum

Pour les deux

Port compatible USB 2.0

* Les systèmes d’exploitation 64 bits ne sont

pas pris en charge.

* Les concentrateurs (hubs) USB ne sont pas

pris en charge.

À propos des copies d’écran

Les copies d’écran concernent la version

Windows.

À propos des marques déposées

· Le symbole SD et le symbole SDHC sont des marques commerciales.

· Windows

®

/Windows Vista

®

sont des marques commerciales ou déposées de Microsoft

®

.

· Macintosh

®

, Mac OS

®

et Logic sont des marques commerciales ou déposées d’Apple Inc.

· Steinberg et Cubase sont des marques commerciales ou déposées de Steinberg Media Technologies GmbH Inc.

· Intel

®

et Pentium

®

sont des marques commerciales ou déposées d’Intel Corporation.

· AMD Athlon

®

sont des marques commerciales ou déposées d’Advanced Micro Devices, Inc.

· MACKIE Control est une marque commerciale ou déposée de LOUD Technologies.

· SONAR est une marque commerciale ou déposée de Cakewalk, Inc.

· Ableton Live est une marque commerciale ou déposée d’Ableton AG.

· Digital Performer est une marque commerciale ou déposée de Mark of the Unicorn.

· Les autres marques commerciales, noms de produit et noms de société mentionnés dans cette documentation sont la

propriété de leurs détenteurs respectifs.

· Toutes les marques commerciales et déposées mentionnées dans ce mode d’emploi ne le sont que dans un but d’identiﬁcation

et non dans le but d’enfreindre les droits de leurs détenteurs respectifs.

R16-AI-Fr.indb 6 17/10/09 09:07

Page is loading ...

“PDF Manuals and Drivers” CD-ROM supplied with R16

Drivers>Windows “Setup.exe”

or

Download the latest “ZOOM R16 Audio Driver” from

ZOOM homepage (http://zoom.co.jp)

and install it on a computer.

ZOOM R16 Audio Driver software is required to enable use of

Cubase LE 4 for audio input and output with a computer. Refer

to the read_me file included in the download package for

instructions on how to install the driver correctly.

[How to install the driver]

Double-click Setup.exe file to activate the installer.

Set language selection

Continued overleaf

Cubase LE 4

Startup Guide

This Cubase LE 4 Startup Guide explains how to install Cubase LE 4 on a computer, make connections and other settings for the R16.

Windows Vista / XP

To connect the R16 to a computer running Windows Vista

(or Windows XP) and to enable audio input/output, proceed

as follows. The installation description uses Windows Vista

as an example.

Insert the supplied “Cubase LE 4” DVD-ROM into

the DVD drive of the computer.

When you insert the DVD-ROM, a screen asking what you want

to do appears. Select “Open folder to view files”.

When the contents of the DVD-ROM are shown, open the

Cubase LE 4 for Windows folder by double-clicking on it, and

then double-click the executable “Setup” (“Setup.exe”) file to start

the installation process.

Bring up the “Sound” window from the Control Panel

and make the input device setting for the computer.

To bring up the “Sound” window, select “Control Panel” from the

Start menu and click “Hardware and Sound”, then click “Sound”.

In the “Sound” window, verify that “R16 Audio Interface” is listed

under the Play and Record devices and that the device is

checked. (To switch between Play and Record, click the tabs at

the top of the window.)

If the device is not checked, right-click on the icon for the device

and click “Set as Default Device” so that a check mark appears.

When the connection is operated on the R16, it is recognized by

the computer.

If this is the first time to connect the R16, wait until the message

“Your devices are ready to use” appears.

Start to “Found New Hardware Wizard”

“Found New Hardware Wizard completed”

Click [Finish] to complete installation.

When connected operation on the R16 side is finished, it is

recognized by the computer.

Connects the first time,Please wait until the message of "The

device was able to be prepared" is displayed.

Click [Next] to start

installation.

If you use SONER,

select Installation

Plug In for Control

Surface.

Click [Install] to start

installation.

Click [Complete] to

finish installation.

Choose [No, not this

time]of Windows

Update and click[Next].

Choose [Install the

software automatically]

and click [Next]to start

installation.

HINT

If nothing happens when you insert the DVD-ROM, open the Start

menu and select “Computer” (“My Computer” in Windows XP). Then

double-click the “Cubase LE 4” DVD-ROM icon to display the contents

of the DVD-ROM.

NOTE

To use Cubase LE 4 continuously, it is necessary to have the User

Registration and the Software License Authentication. The Registration

and Authentication are available to be processed when Cubase LE 4 is

activated on a computer connected to the internet. Click “Register now”

which is shown when activating, enter all the items. If it is not recognized

as Registration, Cubase LE 4 can only be used for a limited period after

installation.

NOTE

We recommend you upgrade the system software to the latest version on

the R16. An R16 operated on an old system may not be recognized

correctly. The latest version can also be downloaded from our homepage.

NOTE

Use a high-quality USB cable and keep the connection as short as

possible. If USB bus power is supplied to the R16 via a USB cable

which is more than 3 meters in length, the low voltage warning

indication may appear.

Choose language and

click [OK].

Set and connect the R16 to the computer

using a USB cable.

Connect USB cable to the R16

Connect USB cable

to computer

USB 1/3

>AUDIO INTERFACE

Menu moves

Select >AUDIO INTERFACE

Press.

AUDIO INTERFACE

Enter?

Execute.

Press.

Sample Rate=48.0Hz

s :Solo

SETTING

[CONTINUE] RESET

Menu moves

Select of how to continue settings.

Press.

1

2

3

4

5

6

Press.

USB indicator

[DEVICE] flashes

AUDIO INTERFACE flashes

Rate=48.0Hz

INTERFACE flashes when the connection is complete Connection setting completed

How to set and connect the R16

Start InstallShield Wizard

Driver-Plug In selection screen

Ready to install the program

If a warning dialogue “Install software” appears, click [Continue].

If a warning dialogue “Windows security Driver Software Licensee

cannot be verified.” appears, click [Install this driver software].

*A message “ZOOM R16 Audio Driver (No Response)” may appear,

but it is not a problem. Wait until it responds.

InstallShield Wizard was completed

DAW software

Cubase LE 4 etc

Windows PC

USB cable

[PHONES]Jack

Audio system,

headphones or other

playback equipment

[OUTPUT]Jack

Audio components,

amp built-in

speakers etc

[INPUT 1-8]Jack

Guitar, other instrument or

built-in stereo mic

R16

ZOOM R16 Audio Driver

If a warning dialogue “Install hardware” appears, click [Continue].

Rate=48.0Hz

When the connection is operated on the R16, it is recognized by

the computer.

Open the “Applications” folder and then the

“Utilities” folder, and double-click “Audio MIDI

Setup”.

The Audio MIDI Setup screen appears. Click “Audio Devices”

and check that “ZOOM R16 Driver” is selected as default

input/default output.

If another device is selected, use the pull-down menu to

change the selection to “ZOOM R16 Driver”.

When the setting is done, close Audio MIDI Setup.

Start Cubase LE 4. Then access the “Devices”

menu, select “Device Setup...” and click “VST

Audio System”.

To start Cubase LE 4, double-click the Cubase LE 4 icon in the

“Applications” folder.

After startup, be sure to verify that “ZOOM R16 Driver” is

selected in the right section of the Device Setup window.

Start Cubase LE 4. Then access the “Devices”

menu, select “Device Setup...” and click “VST

Audio System”

To start Cubase LE 4, double-click the Cubase LE 4 shortcut

icon which was created on the desktop.

After startup, select “ZOOM R16 ASIO Driver” as the ASIO

driver in the right section of the Device Setup window. When

you change the ASIO driver selection, a confirmation message

appears. Click the “Switch” button.

The device indication in the left section of the window now

shows “ZOOM R16 ASIO Driver” as the ASIO driver.

Click on this indication to select it, and then click the “Control

Panel” button in the right section of the Device Setup window.

The window which appears lets you set the buffer size for the

ASIO driver. The buffer size should be set to a value which is

as low as possible without causing sound dropouts during

recording and playback.

The sampling frequency can be changed in Cubase LE 4 in

Project Settings.

When the setting is complete, click the OK buttons in the

respective windows to return to the startup condition of

Cubase LE 4.

From the “Devices” menu of Cubase LE 4, select

“VST Connections” and set INPUT(Input channel

1 - Input channel 8) as the input port to be used

and Output channel 1, Output channel 2 as

Output port on the displayed window.

Use the tabs at top left to switch between input and output, and

verify that “Input channel 1 - Input channel 8 / Output channel 1,

Output channel 2” are selected as device ports.

If another device is selected, click the device port field and change

the selection.

Insert the supplied “Cubase LE 4” DVD-ROM into

the DVD drive of Macintosh. And start installation.

The contents of the DVD-ROM will be shown automatically. If

they are not shown automatically, double-click “Cubase LE 4”

icon displayed on the desktop.

When the contents of the DVD-ROM

are shown, double-click “Cubase LE 4

for Macintosh X” icon to open and

install it using “Cubase LE 4.mpkg”.

Continued from front

Windows Vista / XP

This Cubase LE 4 Startup Guide explains how to install Cubase LE 4 on a computer, make connections and other settings for the R16.

Mac OS X

NOTE

Use a high-quality USB cable and keep the connection as short as

possible. If USB bus power is supplied to the R16 via a USB cable

which is more than 3 meters in length, the low voltage warning

indication may appear.

To connect the R16 to a computer running Mac OS X and

to enable audio input/output or control R16 as control

surface for Cubase LE 4, proceed as follows.

Set and connect the R16 to Macintosh

using a USB cable.

Connect USB cable to the R16

USB 1/3

>AUDIO INTERFACE

Menu moves

Select >AUDIO INTERFACE

Press.

AUDIO INTERFACE

Enter?

Execute.

Press.

Sample Rate=48.0Hz

s :Solo

SETTING

[CONTINUE] RESET

Menu moves

Select of how to continue settings.

Press.

1

2

3

4

5

6

Press.

How to set and connect the R16

Connect USB cable

to computer

USB indicator [DEVICE] flashes

Rate=48.0Hz

INTERFACE flashes when the connection is complete

Connection setting completed

AUDIO INTERFACE

flashes

For optimum enjoyment

While using Cubase LE 4, other applications may slow down

drastically or a message such as “Cannot synchronize with USB

audio interface” may appear. If this happens frequently, consider

taking the following steps to optimize the operation conditions for

Cubase LE 4.

1) Shut down other applications besides Cubase LE 4.

In particular, check for resident software and other utilities.

2) Reduce plug-ins (effects, instruments) used

by Cubase LE 4.

When there is a high number of plug-ins, the computer's processing

power may not be able to keep up. Reducing the number of tracks

for simultaneous playback can also be helpful.

3) Power the R16 from an AC adapter.

When a device designed to use USB power is powered via the USB

port, the current supply may sometimes fluctuate, leading to

problems. See if using an AC adapter improves operation.

Please set latency from the device menu when the sound

cutting occurs. Refer: Install Guide-step5 about details.

If applications still run very slowly or the computer itself does

not function properly, disconnect the R16 from the computer

and shut down Cubase LE 4. Then reconnect the USB cable

and start Cubase LE 4 again.

DAW software

Cubase LE 4 etc

USB cable

R16

[PHONES]Jack

Audio system,

headphones or other

playback equipment

[OUTPUT]Jack

Audio components,

amp built-in

speakers etc

[INPUT 1-8]Jack

Guitar, other instrument

or built-in stereo mic

ZOOM R16 Driver

Macintosh

If another device is selected, use the pull-down menu to change

the selection to “ZOOM R16 Driver”.

When the setting is done, click OK button and close the window.

From the “Devices” menu of Cubase LE 4, select

“VST Connections” and select the device containing

the string “ZOOM R16 Driver 1 ~ 8” as input port

and output port.

Use the tabs at top center to switch between input and output,

and verify that “ZOOM R16 Driver 1 ~ 8” is selected as device

port.

If another device is selected, click the device port field and

change the selection.

“PDF Manuals and Drivers” CD-ROM supplied with R16

Drivers/Mac “ZOOM R16Driver”

or

Download the latest “ZOOM R16Driver” from

ZOOM homepage (http://zoom.co.jp)

and install it on a computer.

ZOOM R16Driver software is required to enable use of

Cubase LE 4 for audio input and output with a computer.

Double-click installer (ZOOM R16

Driver.pkg) icon. Start install it

according to the instruction.

ASIO

Driver

This button is clicked.

Clicking here …

Mode d'Emploi Zoom R16AI Owner's manual

This manual is also suitable for

Mode d'Emploi Zoom R16AI Owner's manual

in other languages

Other documents