Craftsman ryobi 315.269460 Owner's manual

Category
Power tools
Type
Owner's manual

This manual is also suitable for

Owner's Manual
iP R 0 FE S S I 0 NAL_
3/8 in. PROFESSIONAL
ELECTRIC DRILL
Variable Speed / Reversible
Double Insulated
Model No.
315.269460
Ryobi
Save this manual for
future reference.
_, CAUTION: Read and follow
all Safety Rules and Operating
Instructions before first use of
this product.
Customer Help Line: 1-800-932-3188
Safety
Features
Operation
Maintenance
Parts List
Sears, Roebuck and Co., 3333 Beverly Rd., Hoffman Estates, IL 60179 USA
Visit the Craftsman web page: www.sears.com/craftsman
972000-957
12-01
Tableof Contents ..................................................................................................................................................... 2
General Safety Rules ............................................................................................................................................ 2-3
SpecificSafety Rules ............................................................................................................................................... 4
Symbols.................................................................................................................................................................... 5
Features ................................................................................................................................................................... 6
Operation............................................................................................................................................................. 7-10
Maintenance ........................................................................................................................................................... 11
Accessories ............................................................................................................................................................ 12
Warranty ................................................................................................................................................................. 12
ExplodedView and Repair Parts List..................................................................................................................... 13
PartsOrdedng/Service ......................................................................................................................................... 14
A WARNING: Read and undendand all
instructions. Failureto follow all instructions
listed belowmay resultin electdcshock,fire,
and/or seriouspersonalinjury.
SAVE THESE INSTRUCTIONS
Work Area
Keep your work area dean and well lit. Cluttered
benchesand dark areas inviteaccidents.
Do not operate powertools in explosive atmo.
spheres, such as in the pmserme of flammable
liquids, gases, or dust. Power tcolscreate sparks
whichmay ignitethedust or fumes.
Keep bystandem, children, and viaitom away
while operating a power tool. Distractionscan
causeyou to lose control.
Electrical Safety
Double insulated tools are equipped with a
poladzad plug (one blade is wider than the
other). This plug will fit in a polarized outlet only
one way. If the plug does not fit fully in the
outlet, mvaree the plug. If it still does not fit,
conlaet a qualified electrician to install polar-
izad outlet. Do not change the plug in any way.
Doubleinsulation[] eliminatesthe need forthe
three-wire groundedpowercordand grounded
powersupplysystem.
Avoid body contact with grounded surfaces,
such as pipes, rediatore, ranges, and mfdgera-
tom. Them isan increased riskof electricshockif
your body isgrounded.
Don't expose powartools to rein or wet condi-
tions, Water enteringa powertoolwillincreasethe
riskofelectricshock.
Do not abuse the cord, Never use the cord to
carry the tools or pull the plug from an outlet,
2
Keep cord away from heat, oil, shal_ edges, or
moving parts. Replace damaged cords immedi-
ately. Damaged cords increase the risk of electric
shock.
When operating a power tool outside, usa an
outdoor extension cord marked "W-A" or "W,"
These cordsam ratedfor outdooruseand reduce
the riskof electricshock.
Personal Safety
Stay alert, watch what you are doing, and use
common sense when operating a power tool, Do
not use tool while tired or under the influence of
dnJgs, alcohol, or medication. A moment of
inattentionwhileoperatingpower toolsmay resultin
serious pamor,_l injury.
Dines properly. Do not wear loose clothing or
jewehy. Contain long hair. Keep your hair,
clothing, and gloves away from moving parts.
Looseclothes,jewelry,or long haircan be caughtin
moving parts.
Avoid accidental starting. Be sure switch is off
before plugging in. Carryingtoolswithyourfinger
onthe switchor pluggingintoolsthathavethe
switah on invitesaccidents.
Remove adjusting keys orwranchee before
turning the tool on. Awrenchor a kaythat is left
attached to a rotatingpad:oftha toolmay resultin
personalinjury.
Do not ovanmech. Keep proper footing and
balance at all times. Pmper footing and balance
enables bettercontrol of thetoolin unexpected
situations.
Use safety equipment. Always wear eye protec-
tion. Dust mask, nonskidsafety shoes,hardhat,or
hearingprotectionmust be usedfor appropriate
conditions.
Tool Use and Care
Use clamps or other practical way to secure and
support the workpiece to a stable platform.
Holding the work by handor againstyour bodyis
unstableand may loadto lossof control.
Do not force tool. Use the correct tool for your
application. The correcttoolwilldo thejob better
and safer at the ratefor whichitisdesigned.
Do not use tool if switch does not tom it on or
off. Any toolthatcannot becontrolledwiththe
switchisdangerousand mustbe repaired.
Disconnect the plug from the power source
before making any adjustment=, changing
acoeseodse, or storing the tool. Such preventive
safetymeasures reducethe riskof starting the tool
accidentally.
Store idle tools out of the reach of children and
other untrained psmons. Toolsare dangerousin
the handsof untraineduSerS.
Maintain tools with care. Keep cutting tools
sharp and clean. Properlymaintainedtoolswith
sharpcuttingedges are lesslikelyto bindand are
easierto control.
Check for misalignment or binding of moving
pads, breakage of parts, and any other condition
that may affect the tool's operation. If damaged,
have the tool serviced before using. Many
accidents are caused by poorly maintained tools.
Use only accessodse that are recommended by
the manufacturer for your model. Accessories that
may be suitable for one tool may become hazardous
when used on anotber tool,
Service
Tool sewine must be pedonmed only by qualified
repair personnel. Service or maintenanceper-
formed by unqualifiedpersonnelcouldresultin a dsk
ofinjury.
When servicing a tool, use only identical re-
placement pads. Follow instructions in the
Maintenance section of this manual. Use of
unauthorizedpartsor failuretofollowMaintenance
Instructionsmay createa riskof eleotdcshockor
injury.
3
Hold tool by insulated gripping surfaces when perfomning an operation where the cutting tool may contact
hidden wiring or its cord. Contact with a "live" wire will make exposed metal parts of the tool "five" and shock the
operator.
Additional Rules for Safe Operation
Know your power tool. Reed operator's manuel
carefully. Learn itsapplications end limitations, as
well as the specific potential hazards related to
this tool, Followingthis rule will reduce the risk of
electricshock,tim, or sedousinjury.
Always wear safoty glasses. Everyday ayeglaeses
have only impact.rcaistant lenses; they are NOT
safety glasses. Followingthis rulewill reducethe risk
of seriouspersonalInjury.
Protect your lungs, Wear a face or duat mask if the
operation isdusty. FollowingthisnJtewillreducethe
riskof serious personalinjury,
Protect your hearing. Wear hcadeg protection
dudng extended periods of operation, Following
thisrulewillreducethe riskofseriouspersonalinjury.
Inspect tool cords pedodicelly and, if damaged,
have repaired at your nearest Factory Service
Center or other Authorized Service Organiza-
tion. Constantly stay aware of cord location.
Followingthis rulewill reducethe riskof electric
shock orfire.
Check damaged perle. Before furlher usa of the
tool, a guard or other pad that is damaged
should be carefully checked to determine that it
will operate propedy and perform its intended
function. Check for alignment of moving pelts,
binding of moving peas, breakage of parts,
mounting, and any other conditions that may
affect its operation, A guard or other pelt that is
damaged should he properly repaired or replaced
by an authorized service center. Followingthis
rulewillreducethe dsk of electdc shock,fire, or
seriousinjury.
Don't abuse cord. Never cam] the tool by the
cord or yank it to disconnect it from the recep-
tacle. Keep cord away from heat, oil, and sharp
edges. Followingthis rule will reducethe riskof
electric shockor fire.
Make sure your extension cord is in good
condition. When using an extension cord, be
sure to use one heavy enough to cam] the
currant your product will drew. A wire gage size
(A.W.G.) of at least 16 is recommended for an
extension cord 100 feet or less in length. A cord
exceeding 100 feet is not racommended. If in
doubt, use the next heavier gage. The smaller
the gage number, the heavier the cord. An
undersizedcordwillcause a drop in linevoltage
resulting in lossof powerand overheating.
Inspect for and remove all nails from lumber be-
fore drilling. Followingthisrulewillreducethe riskof
seriouspersonalinjury,
Drugs, alcohol, medication. Do not operate tool
while under the influence ofdrugs, alcohol, orany
medication. Followingthisrulewillreducethe risk of
electdc shock,fire, or seriouspersonal injury.
Save these instructions. Refer to them frequently
and use them to instruct others who may usethis
tool. If you loan someone this tool, loan them
these instructions also.
A WARNING: Some dust created by power
sanding, sawing, grinding, drilling,and other
constructionactivitiescontains chemicals known
to cause cancer, birth defects or other
reproductiveharm. Some examples ofthese
chemicalsare:
lead from lead-based paints,
crystalline silicafrom bricks and cement and
other masonry products, and
arsenic end chromiumfrom chemically-
treated lumber.
Your risk from these exposures varies,
depending on how oftenyou do this typeofwork.
TO reduce your exposure to these chemicals:
work in a well ventilated area, and work with
approved safety equipment, such as those dust
masks that are specially designed to filter out
microscopicparticles,
Important:Someofthe following symbolsmay beusedonyourtool.Please studythemand leam theirmeaning.
Proper interpretationofthese symbols willallowyou to operatethe toolbetterand safer.
SYMBOL NAME DESIG NATIONIEXPLANATION
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cyclesper second)
W Watt Power
min Minutes Time
Atterna'dng Current Type or a characteristicofcurrent
no No LoadSpeed Rotationalspeed, at no load
[] Class II Construction Designates Double Insulated
Constructiontools
..Jmin Revolutionsor Rec'lprocetlonPer Minute Revotutions,strokes,surface speed,
orbitsetc. per minute
Safety AlertSymbol Indicatesdanger, warningor saution.
,_k It attentionll!Your safety is
means
involved.
The purposeof safety symbolsis to attract yourattention to possibledangers. The safety symbols, and the
explanations with them, deserve your careful attention and understanding.The safety warnings do not by
themselveseliminate anydanger.The instructionsor warningsthey giveare not substitutesfor properaccident
)raventionmeasures.
SYMBOL MEANING
_k SAFETY' ALERT SYMBOL:
Indicatesdanger,warning,orcaution.May be usedinconjunctionwithothersymbols or pick)graphs.
,_ DANGER: Failureteobeya sefaty warningwinrssultinsedous injurytoyourselfortoothers.Always
followthe safety precautionsto reducethe dskoffire,alectdc shockand personal injury.
,_ WARNING: Failureto obey a safety warningcan resultin sadous injuryto yoursefforto others.
Alwaysfollowthe safety precautionsto reducethe risk offire, electdcshockand personal injury.
CAUTION: Failureto obey a safetywarning may resultin pmpertydamage or personal injuryto
i_ yourself orto others, Alw_s follow the safety presautions to red_e the risk offira,electdc shock and
personalinjury.
NOTE: Advisesyou of informationor instructionsvitalto the operationor maintenanceofthe equipment.
SAVE THESE INSTRUCTIONS
5
KNOWYOURELECTRICDRILL
See Figure 1.
Beforeattemptingto useyour drill,familiarizeyourself
with all operatingfeatures and safety requirements.
Your drillhas manyfeatures for makingdrillingopera-
tionsmore pleasantand enjoyable. Safety, perfor-
mance, and dependabilityhave been giventop priority
inthe designofthis drillmaking iteasy to maintain and
operate.
A CAUTION: Carefullyread throughthisentire
owner'smanualbeforeusingyournew ddll.Pay
close attentiontothe Rules ForSafe Operation,
Warnings,and Cautions. Ifyou useyourdrill
pmpedyand onlyforwhat it is intended,you will
enjoyyears of safe, reliableservice.
ELECTRICAL CONNECTION
Your drillhasa precisionbuiltelectdc motor. It should
ha connected to a power supply that is 120 volts, 60
Hz, AC only (normal household curt'ant). Do not
operatethistoolon directcurrent(DC). A substantial
voltage dropwillcause a lossof powerand the motor
willoverheat. If yourdrilldoes not operatewhen
plugged intoan outlet, double-checkthe powersupply.
TOPVIEWOFLEVEL
FORHORIZONTALDRILUNG
APPLICATIONS
(Use only for the purpose listed below)
Drillinginwood.
Drillingin ceramics,plastics,fiberglass,and lami-
nates.
Drillingin bothhard and soRmetals.
Usingdrivingaccessories,suchas drivingscrews
with screwdriverbits.
Mixingpaints.
PRODUCT SPECIFICATIONS
ChuckCapacity.................................... 1/16 in,to 3/8 in.
Horsepower................................................................ t/2
Input............................................... 120 Volts,AC, 60 Hz
Rating.......................................................... 6.0Amperes
No LoadSpeed ........................................... 0-2500 RPM
Nd_Weight .......................................................... 4.5 Ibs.
LEVEL
A convenientfeature providedon your drillisthe level.
The level isrecessed inthe motorhousingand can he
usedto keep drillbitslevelduring bothhorizontaland
verticalddllingoperations.
ENDVIEWOFLEVEL
FORVER11CALDRlUJNG
KEYLESSCHUCK
SWITCH
TRIGGER
FORWARD-REVERSE
LEVER
LOCK-ON
BUTTON
Fig. 1
WARNING: Do not allow familiarity with toolsto make you careless. Remember that a careless fraction
of a second is sufficientto Inflictsevere injury.
6
_l WARNING: If any pars are missing,do not
operate thistool untilthe missingpartsam
replaced.Failureto do socould resultinpossible
seriouspersonal injunj.
WARNING: Always wear safetygogglesor safety
glasses withside shieldswhen operatingyourdrill.
Failureto do socould resultinduct, shavings,
loose particles or foreign objectsbeing throwninto
your eyes, causing possiblesedousinjury,
SWITCH
See Figure2.
To turnyour drillON, depress the switchtrigger.
Release switch triggertoturnyourddll OFF.
TmGGER
LOCK-ON
BuI"rON
Fig. 2
LOCK-ON BUTTON
See Figure2.
Your drillisequipped witha lock-onfeature, whichis
convenientwhen continuousdrillingfor extended
periodsof time is required,To lock-on,depressthe
switchtdgger, push inand holdthe lock-onbutton
locatedon the side ofthe handle,then release switch
trigger. Release lock-onbuttonandyour ddllwill
continuerunning.
To releasethe lock,depress the switch tdggerand
release.
Ifyou have the lock-onfeature engaged dudngusa and
yourdrill becomes disconnectedfrom power supply,
disengagethe lock-onfeature immediately.
KEYLESS CHUCK
See Figure3
Your new drillhas a keylesschuck,As the name
implies,you can handtighten or release drillbit inthe
chuckjaws. Grasp and holdthe collarof the chuckwith
one hand. Rotate the chuck bodywithyour otherhand,
The arrows showninfigure 3 indicatewhichdirectionto
rotatethe chuck bodyin orderto GRIP (tighten)or
RELEASE (unlock)the drillbit.
RELEASE
DRILLBIT (UNLOCK)
CHUCKBODY
CHUCK
JAWS
GRIP
(TIGHTEN)
CHUCK
COLLAR Fig. 3
WARNING: Do notholdthe chuck bodywith one
hand and usethe powerofthe drilltotighten
chuckjaws on ddll bit,The chuck bodycould slipin
yourhand oryour handcould slipand come in
contact with a rotatingdrillbit.This couldcause an
accidentresulting in sedouspersonalinjury.
REVERSIBLE
See Figure4.
Your elsotdcddll hasthe feature ofbeing reversible,
The directionofchuck rotationiscontrolled by a lever
locatedabove the switch trigger.Withyour drillheldin
normaloperating position,the directionof rotationlever
shouldbe positioned tothe leftofthe switch for ddlling,
The ddlldirectionis reversedwhenthe lever isto the
rightofthe switch.
The designofthe switch will nat permit changingthe
directionofrotationwhilethe ddll isrunning,Release
the switch triggerand allowthe drillto stop before
changingits direction.
Note: Your ddllwill notrun unlessthe switch lever is
pushedfullyto the left or right.
FORWAP_
REVERSE REVERSELEVER
FORWARD Fig.4
VARIABLESPEED
See Figure 5.
TO INSTALL BITS
See Figure6.
Unplugyourdrill,
PULLSWITCHTRIGGER
Fig. 5
Your ddflhas a variable speed switchdesigned to allow
operatorcontrol of speed and torque limits.The speed
and torque ofyourdrillcan be increasedbydepressing
the switchtdgger.
Note: Depress switchtdgger all the way for maximum
speed and torque of yourddll. Depress switchtdgger
only pad:ofthe way for less speed and torque.
Avoid runningyour drillat low speeds for extended
periodsoftime, Runningat low speeds underconstant
usage may cause yourddll to become overheated. If
this occurs,coolyour ddll by running itwithouta load
and at full speed.
The following guidelinesmay be used indetermining
correctspeed for variousapplications;
III Low speed is idealwhen minimumspeed and power
isrequired. Forexample: startingholes without
center punching,ddvingscrews, mixingpaint,and
drillinginceramics.
•ediuro speed is suitablefor ddllinghard metals,
plastics,and laminates.
High speed producesbestresults when maximum
powerisrequired. Forexample: ddllinginwood, soft
metals suchas aluminum, brass, and copper, and
when using drivingaccossodes.
WARNING: Your ddllshouldnever be connected
to power supplywhen you are assemblingparts,
making adjustments,installingor removingddll
bits,cleaning,orwhen not in use. Disconnecting
your drillwillpreventaccidental starting that could
cause seriouspersonalinjury,
DRILL•T
CHUCKJAW$
CHUCKBODY
CHUCKCOLLAR
RIGHT Fig. 6
_ WARNING: Failureto unplugyour ddllcould
resultIn accidentalstarting causing sedousinjury.
Open orclose the chuckjawsto a pointwhere the
openingis slightlylarger than the ddllbityou intend
to use, Also, raisethe frontofyour ddll slightlyto
keepthe drillbitfrom fallingout ofthe chuckjaws.
BI Insertddllbit intochuckthe fulllength ofthejaws,
A WARNING: Do not insertdrill bit intochuckjaws
and tightenas showninfigure 7. This couldcause
drillbitto be thrownfromyourdrillresultingin
possibleseriouspersonal injuryor damage to your
chuck.
Tightenthe chuckjaws on drillbit.
Fig. 7
Totighten: graspand holdthe collarofthe chuckwith
one hand, while rotatingthe chuckbodywithyour
otherhand.
Note: Rotate the chuck bodyinthe directionofthe
arrow markedGRIP to tighten chuckjaws.
Do not use a wrenchto tightenor loosenthe chuck
jaws.
TO REMOVE BITS
Unplugyour drill.
_k WARNING: Failureto unplugyourdrill
could resultinaccidental staring causing
seriousinjury,
Loosenthe chuckjews from ddll bit,
To loosen:graspand heldthe collar ofthe chuck
withone hand, while rotatingchuck bodywith your
otherhand.
Note: Rotatethe chuck bodyin the directionofthe
arrowmarked RELEASE to loosenchuckjaws.
Do not usea wrenchto tighten or loosenthe chuck
jaws.
Remove drillbit from chuckjaws,
DRILLING
See Figures8 and 9.
LEVEL
ENDVIEW
Fig. 8
Depressand release switchtriggerto be sure your
drillis inOFF positionbeforeconnectingit topower
supply.
Checkthedirectionof rotationleverfor correct
setting(forwardor reverse). See F_gure4.
Securethe materialto bedrilledin a vise orwith
clampsto keep itfromturningas the drillbit rotates,
Plugyourddliintopower supplysource,
Holdyour drillfirmlyand place bitat pointto be
ddlled.
Depressthe switchtriggerto startyourdrill.Do not
Iocktha switch ON for jobswhere yourddll may
need to be stopped suddenly.
Movethe drillbit intotheworkplaceapplyingonly
enoughpressureto keepthe bitcutting.Do notforce
your drillor applyside pressureto elongate a hole.
Let yourddll and bitdothe work. SeeF/gures8
and 9.
_k WARNING: Be preparedfor bindingor bit
breakthrough,When these situationsoccur,drill
has a tendencyto graband kickoppositetothe
directionof rotationand could cause loss ofcontrol
when breakingthrough materials.If not prepered,
this lossofcontrolcan resultin possible serious
injury.
When drillinghard, smoothsurfacesuse a canter punch
to markthe desired holelocation.Thiswillpreventthe
drillbitfrom slippingoffcenter as the holeIs started.
However, thevariable speed feature allowsstarting
holeswithoutcenter punchingifdesired.To accomplish
this,operateyourdrillat a low speed untilthe hole is
started.
When drillingmetals usa a light oil onthe drillbitto
keep itfrom overheating.The oilwill prolongthe life of
the bitand increasethe drillingaction,
If the bitjams inthe work piece or ifyourdrillstalls, stop
the tool immediately,Remove the bitfrom the work
piece and determine the reasonforjamming.
LEVEL DRILLING
See Figures8 and 9.
A convenientfeature providedon yourdrillisa level, It
is recessed inthe motorhousingon your drill.Itcan be
usedto keepddll bitslevel duringboth horizontaland
vertical ddllingoperations,
9
TOPVIEW
Openthe chuckjaws and removehex key. Remove
the chuckscrew bytuming itin a clockwisedirection.
Se_ Figure 11.
SCREWDRIVER
LEVEL
CHUCK REMOVAL
See RgureS 10, 11,and 12.
The chuckmustbe removed in order to usesome
accessories. To remove:
Unplugyour drill.
Fig. 9
A WARNING: Failureto unplugyourddll could
result in accidental startingcausingserious Injury.
Inserta 8 mm (5/16 in.)or larger hex key intothe
chuckofyour drilland tighten the chuckjaws
securely.
Tap the hex key sharplywith a mallet in a clockwise
direction.See Figure t0. Thiswill loosenthe screw
in the chuckfor easy removal.
MALLET
CHUCKJAW6
Fig. 10
lO
HEXKEY CHUCK
Fig. 11
Note: The chuckscrew has lefthandthreads.
Inserthex key intochuckand tightenchuckjaws
securely,Tap sharplywith a mallet ina counter-
clockwisedirection.This willloosenthe chuckon the
spindle.It can now be unscrewed by hand. See
Figure 12.
Fig. 12
The chuck may at times become looseon the spindle
and developa wobble.Also,the chuckscrew may
become loosecausing the chuckjaws to bindand
preventthemfrom closing.To tighten,follow these
steps:
Unplugyourddll.
A WARNING: Failure tounplugyourdrillcould
resultin accidentalstartingcausingseflous injury.
Inserthex keyintochuckand tighten chuckjaws
securely. Tap hex key sharplywith a mallet ina
clcckwisedirection.This willtightenthe chuck onthe
spindle.
Open the chuckjaws and remove the hex key.
Tightenthe chuckscrew,
Note: The chuckscrewhas left handthreads.
GENERAL
Onlythepartsshownonpartslist,page13,am
intendedtoberepairedorreplacedbythecustomer.All
otherparts representan importantpart ofthe double
insulationsystem and shouldbe servicedonlyat a
Sears Service Center.
Avoid usingsolventswhen cleaningplasticparts. Most
plasticsare susceptibleto damage from varioustypes
ofcommemial solventsand may be damaged bytheir
use. Use clean clothsto remove dirt, carbondust, etc.
_IL WARNING: Do notat anytime let brakefluids,
gasoline,petroleum-basedproducts,penetrating
oils,etc. come in contactwithplastic parts.They
containchemicalsthatcan damage, weaken or
destroyplastic.
It has been foundthat electrictools are subjectto
acceleratedwear and possibleprematurefailure when
they am usedon fiberglass boats,sportscars,
wallboard,spacklingcompounds,or plaster.The chips
and grindingsfrom these matedals are highlyabrasive
to electrictool parts, suchas bearings, brushes,
commutators,arc. Consequently, it is not recommended
that thistool be used for extended work on any
fiberglassmaterial,wallboard, spacklingcompounds,or
plaster.During any use onthese materials, it is
extremely importantthatthe tool iscleaned frequently
by blowingwith an air jet.
LUBRICATION
All ofthe bearings inthis toolare lub_catedwith a
sufficientamount of high-gradelubricantfor the life of
the unitunder normaloperating conditions.Therefore,
nofurther lubricationisrequired.
_1_ WARNING: Always wear safetygogglesor safety
glasseswith side shieldsduringpower toolopera-
tionor when blowingdust,If operationisdusty,also
wear a dust mask,
DOUBLE INSULATION
Doubleinsulationisa conceptin safety inelectric
powertools, whicheliminatesthe need for the usual
three-wire groundedpowercord. Allexposedmetal
parts are isolatedfrom the internalmetal motor
components withprotectinginsulation.Doubleinsulated
toolsdo not need to begrounded.
IMPORTANT
Servicingofa toolwith double insulationrequires
extreme care and knowledgeofthe system and should
be performedonly bya qualified servicetechnician.For
service,we suggestyou retum the tooltoyour nearest
Seam store for repair,Always use odginelfactory
replacementparts when servicing.
EXTENSION CORDS
The useof any e0(tensioncord willcause some lossof
power,To keapthe losstoa minimumand to prevent
tooloverheating,use an extensioncordthat isheavy
enoughto carrythe currentthe toolwilldrew.
Awire gage size (A,W,G.) ofat least 16 is
recommendedfor an extensioncord 100 feet or lessin
length,When workingoutdoors,usean extensioncord
that issuitablefor outdooruse, The coN's jacketwillbe
marked WA,
IL CAUTION: Keapextension cordsawayfmmthe
ddllingarea and positionthe cordso thatitwillnot
getcaught on lumber,tools,etc., duringdrilling
operation.
_1= WARNING: Check extensioncordsbeforeeach
use. Ifdamaged replaceimmediately.Never use
tealwitha damaged cordsincetouchingthe
damagedarea couldcause electricalshockresult-
ing in seriousinjury.
Extensioncordssuitablefor usewithyourddllare
availableat your nearestSears Retail Store.
11
Thefollowingrecommendedaccessoriesare currentlyavailableat Sears retailstores.
HighSpeed Bi_s(Forwoodor metal)
MasonryBits
Wood BoringBits
Hole Saws
DowelingJig
DrillStand
Wire Brushes,All
112in.Max.
3/4 in, Max.
1 in. Max.
2 in. Max.
_1= WARNING: The useof attachmentsor accessoriesnot listedmightbe hazardous.
_lh WARNING:
The operation of any ddll can result in foreign objects being thrown intoyour eyes, which
can result in severe eye damage, Before beginning power tool operation, always wear
safety goggles or safety glasses with side shields and a fullface shield when needed, We
recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses
with side shields.Always wear eye protectionwhich is marked to complywith ANSI Z87.1.
WARRANTY'
FULL ONE YEAR WARRANTY ON CRAFTSMAN PROFESSIONAL ELECTRIC DRILL
Ifthis CRRFIr'SMnN Drillfails due to a defectin matedal or workmanshipwithinone year fromthe dateof purchase,
Sears will replaceit, free of charge.
WARRANTY SERVICE ISAVAILABLE BY SIMPLY RETURNING THE TOOL TO THE NEAREST SEARS STORE
IN THE UNITED STATES.
This warrantygivesyou specificlegalrights,and you may also have otherrightswhichvaryfrom stateto state,
Seers, Roebuck and Co., Dept. 8t7WA, Hoffman Estates, IL 60179
SAVE THESE INSTRUCTIONS
12
I
CRAFTSMAN 3/8 in. PROFESSIONAL ELECTRIC DRILL
MODEL NO. 315.269460
I
The modelnumherwillbefoundona plateattachedtothe motorhousing.Alwaysmen_ionthe model I
number in all correspondenceregardingyour ELECTRIC DRILL or when ordedng repairparts.
J
SEE BACK PAGE FOR PARTS ORDERING INSTRUCTIONS
2
4
Key No.
1
2
3
4
PaN No.
981570-002
6611903
9411552
9411497
972000-957
PARTS lIST
Description Quan.
3/8 in. Chuck....................................................................................... 1
Screw (Special)................................................................................... 1
Data Plate........................................................................................... 1
Logo Plate........................................................................................... 1
Operator's Manual
m
13
il!i=i
iiiiil
iir-i
iilI
_ii!!
For repair of major brand appliances in your own home...
no matter who made it, no matter who sold it!
1-800-4-MY-HO MEsMAnytime,dayor night
(1-800-469-4663)
www.sea rs.com
To bring in products such as vacuums, lawn equipment and elecb'onics
for repair, call for the location of your nearest Sears Parts & Repair Center
iiii!
1-800-488-1222 Anytime, day or night
www.sears.com
For the replacement parts, accessories and owner's manuals
that you need to do-it-yourself, call Sears PartsDiract sM!
1-800-366-PART 6a.=.-11p.mCST,
(1-800-366-7278) 7 days a week
www.sears.condpa rtsdirect
ili!!i
ii!!ii
iiiiii
_55.115!
ii--=_i
!&,'.!
iilE!!
iilii
iliii
!!t!ii
L5ilII
il!lti
I!H-E,,.
ii!
To purchase or inquire about a Sears Service Agreement:
1-800-827-6655
7 a.m. - 5 p.m. CST, Mon.- Sat.
:==--
Para pedir servicio de reparaciOn a domicillo,
y para ordenar piezas con entrega a domicilio:
1-888-SU-HOGAR =
(1-888-784-6427)
Au Canada pour service an fran_:ais:
1-877-LE-FOYER =
(1-877-533-6937)
* { 1
___:_:__; __;-__
HomeCentral"
® Rendered Trademark I TM Trade=n_k of Sear& Roebuck and CO.
© Seats, Roebuck and Go. ® Merce Regi_drsda/ TM M_rca de F_lbrlca de Se_-e, Roebuck a_d Co.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14

Craftsman ryobi 315.269460 Owner's manual

Category
Power tools
Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI