NEC EA243WM-BK User manual

MultiSync EA243WM

MultiSync EA273WM

User’s Manual

Index

Warning, Caution ..........................................................................................................................English-1

Registration Information ...............................................................................................................English-2

Recommended use ......................................................................................................................English-3

Contents .......................................................................................................................................English-5

Quick Start ....................................................................................................................................English-6

Controls ........................................................................................................................................English-11

Speciﬁ cations - EA243WM ...........................................................................................................English-17

Speciﬁ cations - EA273WM ...........................................................................................................English-18

Features .......................................................................................................................................English-19

Troubleshooting ............................................................................................................................English-20

Using the Auto Brightness function ..............................................................................................English-22

ControlSync ..................................................................................................................................English-23

TCO Displays 5 ............................................................................................................................English-24

Manufacturer’s Recycling and Energy Information .......................................................................English-25

English-1

English

WARNING

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE POWER CORD IS UNPLUGGED

FROM WALL SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT

THE POWER CORD FROM THE AC OUTLET.DO NOT REMOVE COVER (OR BACK). NO USER

SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol warns user that uninsulated voltage within the unit may have sufﬁ cient magnitude to cause

electric shock. Therefore, it is dangerous to make any kind of contact with any part inside this unit.

This symbol alerts the user that important literature concerning the operation and maintenance of this unit

has been included. Therefore, it should be read carefully in order to avoid any problems.

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO, DO NOT

USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS UNLESS THE

PRONGS CAN BE FULLY INSERTED.

REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH VOLTAGE COMPONENTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

Windows is a registered trademark of Microsoft Corporation. NEC is a registered trademark of NEC Corporation.

ErgoDesign is a registered trademark of NEC Display Solutions, Ltd. in Austria, Benelux, Denmark, France, Germany, Italy,

Norway, Spain, Sweden, U.K.

NERGY STAR is a U.S. registered trademark.

All other brands and product names are trademarks or registered trademarks of their respective owners.

As an E

NERGY STAR

Partner, NEC Display Solutions of America, Inc. has determined that this product

meets the E

NERGY STAR guidelines for energy efﬁ ciency. The ENERGY STAR emblem does not represent EPA

endorsement of any product or service.

The DisplayPort Icon is a trademark of the Video Electronics Standards Association, registered in the U.S.

and other countries.

HDMI, the HDMI logo and High-Deﬁ nition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC

in the United States and other countries.

• The intended primary use of this product is as an Information Technical Equipment in an ofﬁ ce or domestic environment.

• The product is intended to be connected to a computer and is not intended for the display of television broadcast signals.

CAUTION: Please use the power cord provided with this display in accordance with the table below. If a power cord is not

supplied with this equipment, please contact your supplier. For all other cases, please use a power cord that matches the

AC voltage of the power outlet and has been approved by and complies with the safety standard of your particular country.

Plug Type North America

European

Continental

U.K. Chinese Japanese

Plug Shape

Country

Voltage

U.S.A./Canada U.K. China JapanEU (except U.K.)

120* 230 220 100230

* When operating the monitor with its AC 125-240V power supply, use a power supply cord that matches the power supply

voltage of the AC power outlet being used.

NOTE: This product can only be serviced in the country where it was purchased.

English-2

Registration Information

Canadian Department of Communications Compliance Statement

DOC: This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

C-UL: Bears the C-UL Mark and is in compliance with Canadian Safety Regulations according to CAN/CSA C22.2 No. 60950-1.

FCC Information

1. Use the attached speciﬁ ed cables with the MultiSync EA243WM (L240UM)/MultiSync EA273WM (L270UL) monitor so as

not to interfere with radio and television reception.

(1) The power supply cord you use must have been approved by and comply with the safety standards of U.S.A.,

and meet the following condition.

Power supply cord

Length

Plug shape

Non shield type, 3-conductor

1.8 m

U.S.A

(2) Please use the supplied shielded video signal cable, 15-pin mini D-SUB to D-SUB cable or DVI-D to DVI-D cable.

Use of other cables and adapters may cause interference with radio and television reception.

2. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate radio frequency energy, and, if not installed and used

in accordance with the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try

to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult your dealer or an experienced radio/TV technician for help.

If necessary, the user should contact the dealer or an experienced radio/television technician for additional suggestions.

The user may ﬁ nd the following booklet, prepared by the Federal Communications Commission, helpful: “How to Identify

and Resolve Radio-TV Interference Problems.” This booklet is available from the U.S. Government Printing Ofﬁ ce,

Washington, D.C., 20402, Stock No. 004-000-00345-4.

Declaration of Conformity

This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions. (1) This device may not

cause harmful interference, and (2) this device must accept any interference received, including interference that may cause

undesired operation.

U.S. Responsible Party: NEC Display Solutions of America, Inc.

Address: 500 Park Boulevard, Suite 1100

Itasca, Illinois 60143

Tel. No.: (630) 467-3000

Type of Product: Display Monitor

Equipment Classiﬁ cation: Class B Peripheral

Model: MultiSync EA243WM (L240UM)

MultiSync EA273WM (L270UL)

We hereby declare that the equipment speciﬁ ed above conforms

to the technical standards as speciﬁ ed in the FCC Rules.

English-3

English

Recommended use

Safety Precautions and Maintenance

FOR OPTIMUM PERFORMANCE, PLEASE NOTE

THE FOLLOWING WHEN SETTING UP AND

USING THE LCD COLOR MONITOR:

• DO NOT OPEN THE MONITOR. There are no user serviceable parts inside and opening or removing covers may expose

you to dangerous shock hazards or other risks. Refer all servicing to qualiﬁ ed service personnel.

• Do not spill any liquids into the cabinet or use your monitor near water.

• Do not insert objects of any kind into the cabinet slots, as they may touch dangerous voltage points, which can be harmful or

fatal or may cause electric shock, ﬁ re or equipment failure.

• Do not place any heavy objects on the power cord. Damage to the cord may cause shock or ﬁ re.

• Do not place this product on a sloping or unstable cart, stand or table, as the monitor may fall, causing serious damage to

the monitor.

• The power supply cord you use must have been approved by and comply with the safety standards of your country.

(Type H05VV-F 3G 1mm

should be used in Europe).

• In UK, use a BS-approved power cord with molded plug having a black (5A) fuse installed for use with this monitor.

• Do not place any objects onto the monitor and do not use the monitor outdoors.

• Do not bend power cord.

• Do not use monitor in high temperatured, humid, dusty, or oily areas.

• Do not cover vent on monitor.

• Vibration can damage the backlight. Do not install where the monitor will be exposed to continual vibration.

• If monitor or glass is broken, do not come in contact with the liquid crystal and handle with care.

• To prevent damage to the LCD monitor caused by tipping over due to earthquakes or other shocks, make sure to install the

monitor in a stable location and take measures to prevent falling.

Immediately turn off the power, unplug your monitor from the wall outlet and move to a safe location then refer servicing to

qualiﬁ ed service personnel under the following conditions. If the monitor is used in this condition, the monitor may cause fall, ﬁ re

and electric shock:

• If the monitor stand has been cracked or peeled.

• If the monitor has been wobbled.

• If the monitor has an unusual odor.

• When the power supply cord or plug is damaged.

• If liquid has been spilled, or objects have fallen into the monitor.

• If the monitor has been exposed to rain or water.

• If the monitor has been dropped or the cabinet damaged.

• If the monitor does not operate normally by following operating instructions.

• Allow adequate ventilation around the monitor so that heat can properly dissipate. Do not block ventilated

openings or place the monitor near a radiator or other heat sources. Do not put anything on top of monitor.

• The power cable connector is the primary means of detaching the system from the power supply.

The monitor should be installed close to a power outlet which is easily accessible.

• Handle with care when transporting. Save packaging for transporting.

• Do not touch LCD panel surface while transporting, mounting and setting.

Applying pressure on the LCD panel can cause serious damage.

Image Persistence: Image persistence is when a residual or “ghost” image of a previous image remains visible on the screen.

Unlike CRT monitors, LCD monitors’ image persistence is not permanent, but constant images being displayed for a long period

of time should be avoided.

To alleviate image persistence, turn off the monitor for as long as the previous image was displayed. For example, if an image

was on the monitor for one hour and a residual image remains, the monitor should be turned off for one hour to erase the image.

NOTE: As with all personal display devices, NEC DISPLAY SOLUTIONS recommends using a moving screen saver at regular

intervals whenever the screen is idle or turning off the monitor when not in use.

CAUTION

English-4

CORRECT PLACEMENT AND ADJUSTMENT OF THE MONITOR CAN

REDUCE EYE, SHOULDER AND NECK FATIGUE. CHECK THE

FOLLOWING WHEN YOU POSITION THE MONITOR:

• For optimum performance, allow 20 minutes for the display to warm up.

• Adjust the monitor height so that the top of the screen is at or slightly below eye level.

Your eyes should look slightly downward when viewing the middle of the screen.

• Position your monitor no closer than 40 cm (15.75 inches) and no further away than

70 cm (27.56 inches) from your eyes. The optimal distance is 50 cm (19.69 inches).

• Rest your eyes periodically by focusing on an object at least 20 feet away. Blink often.

• Position the monitor at a 90° angle to windows and other light sources to minimize glare

and reﬂ ections. Adjust the monitor tilt so that ceiling lights do not reﬂ ect on your screen.

• If reﬂ ected light makes it hard for you to see your screen, use an anti-glare ﬁ lter.

• Clean the LCD monitor surface with a lint-free, non-abrasive cloth. Avoid using any

cleaning solution or glass cleaner!

• Adjust the monitor’s brightness and contrast controls to enhance readability.

• Use a document holder placed close to the screen.

• Position whatever you are looking at most of the time (the screen or reference material) directly in front of you to minimize

turning your head while you are typing.

• Avoid displaying ﬁ xed patterns on the monitor for long periods of time to avoid image persistence (after-image effects).

• Get regular eye checkups.

Ergonomics

To realize the maximum ergonomics beneﬁ ts, we recommend the following:

• To avoid eye fatigue, adjust the brightness to a moderate setting. Place a sheet of white paper next to the LCD screen for

luminance reference.

• Do not position the Contrast control to its maximum setting.

• Use the preset Size and Position controls with standard signals.

• Use the preset Color Setting.

• Use non-interlaced signals with a vertical refresh rate of 60 Hz.

• Do not use primary color blue on a dark background, as it is difﬁ cult to see and may produce eye fatigue due to insufﬁ cient

contrast.

Cleaning the LCD Panel

• When the LCD is dusty, please gently wipe with a soft cloth.

• Please do not rub the LCD panel with hard or coarse material.

• Please do not apply pressure to the LCD surface.

• Please do not use OA cleaner as it will cause deterioration or discoloration on the LCD surface.

Cleaning the Cabinet

• Unplug the power supply

• Gently wipe the cabinet with a soft cloth

• To clean the cabinet, dampen the cloth with a neutral detergent and water, wipe the cabinet and follow with a dry cloth.

NOTE: Many plastics are used on the surface of the cabinet. DO NOT clean with benzene, thinner, alkaline detergent,

alcoholic system detergent, glass cleaner, wax, polish cleaner, soap powder, or insecticide. Do not touch rubber or

vinyl to the cabinet for a long time. These types of ﬂ uids and fabrics can cause the paint to deteriorate, crack or peel.

For more detailed information on setting up a healthy work environment, write to the American National Standard for Human

Factors Engineering of Computer Workstations - ANSI/HFES 100-2007 - The Human Factors Society, Inc. P.O. Box 1369, Santa

Monica, California 90406.

English-5

English

Contents

Your new NEC monitor box* should contain the following:

• MultiSync monitor with tilt/swivel/pivot/height adjust stand

• Power Cord*

• Video Signal Cable (DVI-D to DVI-D cable)

• Video Signal Cable (Mini D-SUB 15 pin to Mini D-SUB 15 pin)

• USB Cable

• Audio Cable (ø 3.5 stereo mini plug)

• ControlSync Cable (ø 2.5 stereo micro plug)

• Setup Manual

Setup Manual DVI-D to DVI-D cable

Audio Cable

Power Cord*

Setup Manual

Mini D-SUB 15 pin to

Mini D-SUB 15 pin

USB Cable

ControlSync Cable

* Remember to save your original box and packing material to transport or ship the monitor.

The type and number of power cords included will depend on the where the LCD monitor is to be shipped. When more than one power cord

is included, please use the power cord that matches the AC voltage of the power outlet and has been approved by and complies with the

safety standard of your particular country.

English-6

Quick Start

To connect the LCD monitor to your system, follow these instructions:

NOTE: Make sure to read “Recommended Use” (page 3) before installation.

1. Turn off the power of your computer.

2. For a PC or MAC with DVI digital output: Connect the DVI signal cable to the connector of the display card in your system

(Figure A.1). Tighten all screws.

For a PC with Analog output: Connect a 15-pin mini D-SUB signal cable to the connector of the display card in your

system (Figure A.2).

For a MAC: Connect a Macintosh cable adapter (not included) to the computer, then attach the 15-pin mini D-SUB signal

cable to the Macintosh cable adapter (Figure A.3).

NOTE: Some Macintosh systems do not require any Macintosh cable adapter.

For a PC with DisplayPort output: Connect the DisplayPort cable to the connector of the display card in your system

(Figure A.4).

Figure A.1

Figure A.3

Macintosh Cable

Adapter

(not included)

Figure A.2

Figure A.4

DisplayPort cable

(not included)

NOTE: 1. Please use a DisplayPort cable with DisplayPort logo.

2. When removing the DisplayPort cable, hold down the top button to release the lock.

3. Place hands on each side of the monitor to tilt the LCD panel 30-degree angle and lift up to the highest position.

4. Connect all cables to the appropriate connectors (Figure C.1). When using the USB cable, connect the B type connector

to the USB upstream port on the right back side of the monitor and the A type connector to the downstream port on the

computer (Figure C.1a). If using the cord from a USB device, plug into one of the downstream ports of the monitor.

NOTE: Incorrect cable connections may cause abnormal operation, damage display quality/components of LCD module and/

or shorten the module’s life.

Figure C.1

Power cord

30° Tilt

HDMI

DisplayPort

DVI

D-SUB

Figure C.1a

A Type

B Type

A Type

B Type

Highest

Stand

Position

Audio Input

USB Downstream

Headphone

USB Downstream

ControlSync IN/OUT*

USB Upstream

*: See page 23

English-7

English

5. To keep the cables neatly organized, place them into the cable management system that is built into the stand.

Place the cables in the hooks ﬁ rmly and evenly (Figure C.2 and Figure C.3).

NOTE: Cable cover is not removable.

6. Please check that you can still rotate, raise and lower the monitor screen after you have installed the cables.

Figure C.2 Figure C.3

Power Cord

DisplayPort Cable*

D-SUB Cable

DVI Cable

HDMI Cable*

Audio Cable

ControlSync Cables

USB Cables

Power Cord

DisplayPort Cable*

D-SUB Cable

DVI Cable

HDMI Cable*

Audio Cable

ControlSync Cables

USB Cables

* Cable not included.

7. Connect one end of the power cord to the AC inlet on the back of the monitor and the other end to the power outlet.

NOTE: Please refer to Caution section of this manual for proper selection of AC power cord.

8. Turn on the computer and the monitor by pressing the power key on the front bezel (Figure E.1).

9. No Touch Auto Adjust automatically adjusts the monitor to optimal settings upon initial setup. For further adjustments, use

the following OSD controls:

• Auto Contrast (Analog input only)

• Auto Adjust (Analog input only)

Refer to the Controls section of this User’s Manual for a full description of these OSD controls.

NOTE: If you have any problems, please refer to the Troubleshooting section of this User’s Manual.

Figure E.1

Power Sign

English-8

Raise and Lower Monitor Screen

The monitor may be raised or lowered in either portrait or landscape mode.

To raise or lower screen, place a hand on each side of the monitor and lift or lower to the desired height (Figure RL.1).

NOTE: Handle with care when raising or lowering the monitor screen.

Figure RL.1

Screen Rotation

Before rotating, disconnect power cord and all cables, then the screen must be raised to the highest level and tilt to avoid

knocking the screen on the desk or pinching your ﬁ ngers.

To raise the screen, place a hand on each side of the monitor and lift up to the highest position (Figure RL.1).

To rotate screen, place a hand on each side of the monitor screen and turn clockwise from landscape to portrait or counter-

clockwise from portrait to landscape (Figure R.1).

To rotate OSD menu between landscape and portrait, refer to “Controls” section.

Figure R.1

Tilt and Swivel

Grasp the top and bottom sides of the monitor screen with your hands and adjust the tilt and swivel as desired (Figure TS.1).

Figure TS.1

NOTE: Handle with care when tilting the monitor screen.

English-9

English

Flexible Arm Installation

This LCD monitor is designed for use with a ﬂ exible arm.

To prepare the monitor for alternate mounting purposes:

• Follow the instructions provided by the manufacturer of the display mount.

• To meet the safety requirements, the mounting stand must be able to support the weight of the monitor and be UL-certiﬁ ed.

Remove Monitor Stand for Mounting

To prepare the monitor for alternate mounting purposes:

1. Disconnect all cables.

2. Place a hand on each side of the monitor and lift up to the highest position.

3. Place monitor face down on a non-abrasive surface (Figure S.1).

NOTE: Handle with care when the monitor is facing down.

Figure S.1

4. Remove 2 bottom screws ﬁ rst: Move stand left and right to remove bottom 2 screws (Figure S.2, S.3).

5. Remove 2 top screws.

6. Remove the stand (Figure S.4).

7. The monitor is now ready for mounting in an alternate manner.

8. Connect the cables to the back of the monitor.

NOTE: Handle with care when removing monitor stand.

Figure S.2 Figure S.3 Figure S.4

English-10

Mount Flexible Arm

This LCD monitor is designed for use with a ﬂ exible arm.

1. Follow the instructions on how Remove Monitor Stand for Mounting to remove the stand.

2. Use the 4 screws removed from the stand to attach the arm to the monitor (Figure F.1).

Caution: Use ONLY the screws (4 pcs) that were removed from the stand to avoid damage to the monitor or stand. To meet

the safety requirements, the monitor must be mounted to an arm which guaranties the necessary stability under

consideration of the weight of the monitor. The LCD monitor should only be used with an approved arm

(e.g. GS mark).

4 Screws (M4)

(Max Depth: 8.5 mm)

Figure F.1

Weight of LCD assembly: 4.3 kg

Additional 4 VESA

100 mm

Thickness of Bracket (Arm)

2.0~3.2 mm

Additional 4 VESA holes are provided for those users needing a lower monitor head position than that is available from the

monitor stand in shipping conﬁ guration. The monitor stand can be re-attached by using the 4 screws to the lower position VESA

holes.

NOTE: 1. The monitor head tilt function may experience impaired operation when attached to the lower position VESA holes.

2. The monitor head pivot function should not be used when attached to the lower position VESA holes.

English-11

English

Controls

OSD (On-Screen Display) control keys on the front of the monitor function

are as follows:

To access OSD menu, touch any of the control keys.

To change signal input, touch the SELECT key.

NOTE: Exit OSD in order to change signal input.

1 Ambibright Sensor

Human Sensor

Detects the level of ambient lighting, allowing the monitor to make adjustments to various

settings resulting in a more comfortable viewing experience. Do not cover this sensor.

2 LED Indicates that the power is on or off.

3 Power Turns the monitor on and off.

4 INPUT/SELECT Enters the OSD Control menu. Enters OSD sub menus.

Changes the input source when not in the OSD Control menu.

5 MENU/EXIT Accesses OSD menu. Exits the OSD sub menu. Exits OSD Control menu.

6 LEFT/RIGHT Navigates to the left or right through the OSD Control menu.

You can adjust the BRIGHTNESS directly while the OSD menu is off*.

7 UP/DOWN Navigates up or down through the OSD Control menu.

You can adjust the VOLUME directly when not in the OSD Control menu*.

8 RESET/ECO Resets the OSD back to factory settings in the OSD control menu.

Switches among ECO MODE settings.

Activates Auto Adjust function if helded for 3 seconds while the OSD menu is off (Analog input

only)*.

* When Hot Key function is OFF, this function is disabled.

ECO TOOLS

BRIGHTNESS

Adjusts the overall image and background screen brightness.

If ECO MODE is set to 1 or 2, a bar for CARBON FOOTPRINT will appear.

CONTRAST

Adjusts the overall image and background screen brightness by input signal level.

ECO MODE

Decreases the amount of power consumption by reducing the brightness level.

OFF: No function.

1 (ENERGY STAR SETTING): Sets brightness variable range from 0% to 80% (EA243WM)/from 0% to 70%

(EA273WM).

This setting can adjust brightness to a range in which power is reduced to meet Energy Star measurement conditions.

2 (40% POWER SAVINGS - EA243WM) (50% POWER SAVINGS - EA273WM): Sets brightness variable range from

0% to 40%.

This setting can adjust brightness to a range in which power is reduced by 40% (EA243WM)/50% (EA273WM)

compared to the maximum brightness setting.

When this function is set to ON, a CARBON FOOTPRINT bar will appear alongside the brightness adjustment bar.

NOTE: This function is disabled when DV mode is set for Dynamic.

English-12

AUTO BRIGHTNESS

OFF: No function.

1 (AMBIENT LIGHT): Automatically adjusts the brightness to the optimal setting by detecting the brightness level of

the environment*

*1: Please refer to page 22 for full “Auto Brightness” information.

2 (WHITE CONTENT): Automatically adjusts the brightness to the optimal brightness setting based on the white

display area.

The environmental brightness sensor (Ambibright sensor) has no function.

3 (AMBIENT + CONTENT): Automatically adjusts the brightness to the optimal setting based on the white display area

and the brightness level of the environment, detected by the AmbiBright sensor.

NOTE: This function is disabled when DV mode is set for Dynamic.

OFF MODE SETTING

The Intelligent Power Manager allows the monitor to enter into power saving mode after a period of inactivity.

The OFF MODE has two settings:

STANDARD: Monitor enters into power saving mode automatically when the input signal is lost.

SENSOR: Monitor enters into power saving mode automatically when the amount of surrounding light goes below the

level determined by you. The level can be adjusted in OFF MODE sensor setting.

When in power saving mode, the LED on the front of the monitor becomes dark blue. When in power saving mode,

touch any of the front keys, except for POWER and INPUT, to return to normal.

When the amount of surrounding light returns to normal levels, the monitor will automatically return to normal mode.

SENSOR SETTING (OFF MODE SETTING)

Adjusts threshold level of ambient light sensor for detected dark condition and shows current sensor measurement

result.

START TIME (OFF MODE SETTING)

Adjusts wait time to enter into to a lower power consumption level when Ambient Sensor detects dark condition.

HUMAN SENSING

The sensor on the front side of the monitor detects the movement of a person by using the HUMAN SENSING

function. THE HUMAN SENSING has three settings:

OFF: No human sensing.

1 (LIGHT): After it is detected that there is no person after a period of time, the monitor shifts to low brightness mode

automatically to reduce the power consumption. When a person comes near the monitor again, the monitor will

automatically return to normal mode. START TIME adjusts the wait time to react.

2 (DEEP): After it is detected that there is no person, the monitor shifts to power saving mode automatically to reduce

the power consumption. When a person comes near the monitor again, it resumes from the power saving mode and

displays the images.

SENSOR SETTING (HUMAN SENSING)

Adjusts the threshold level of human sensing.

When human icon is located on the right side of the white color bar or vermilion color wave, it is detected that there is

no person.

NOTE: Once the OSD has been closed, Human sensor starts to work.

START TIME (HUMAN SENSING)

Adjusts the wait time of entering to low brightness mode or power saving mode when Human Sensor detects no

person.

DV MODE

Dynamic Visual Mode allows you to select from the following settings:

STANDARD: Standard setting.

TEXT: Setting that makes letters and lines crisp; best suited for basic word processing and spreadsheets.

MOVIE: Setting that boosts dark tones; best suited for movies.

GAMING: Setting that boosts whole tones; best suited for games that use vivid, colorful images.

PHOTO: Setting that optimizes contrast; best suited for still images.

DYNAMIC: Setting that adjusts the brightness by detecting the screen’s black areas and optimizes it.

English-13

English

SCREEN (Analog input only)

AUTO ADJUST

Automatically adjusts the image position, H. Size and Fine settings.

AUTO CONTRAST

Adjusts the image displayed for non-standard video inputs.

LEFT / RIGHT

Controls horizontal image position within the display area of the LCD.

DOWN / UP

Controls vertical image position within the display area of the LCD.

H.SIZE

Adjusts the horizontal size by increasing or decreasing this setting.

If the “AUTO Adjust” function does not give you a satisfactory picture setting, a further tuning can be performed by

using the “H.Size” function (dot clock). For this a Moiré test pattern could be used. This function may alter the width

of the picture. Use LEFT/RIGHT key to center the image on the screen. If the H.Size is wrongly calibrated, the result

would look like the left drawing. The image should be homogeneous.

When H.SIZE value is

wrong.

When H.SIZE value is

improved.

When H.SIZE value is

correct.

FINE

Improves focus, clarity and image stability by increasing or decreasing this setting.

If the “Auto Adjust” function and the “H.Size” function do not give you a satisfactory picture setting, a ﬁ ne tuning can be

performed by using the “Fine” function.

For this a Moiré test pattern could be used. If the Fine value is wrongly calibrated, the result would look like the left

drawing. The image should be homogeneous.

When FINE value is

wrong.

When FINE value is

correct.

INPUT RESOLUTION

Selects one of the following pair of resolutions as the input signal priority:

1360 x 768 or 1280 x 768 or 1024 x 768 (vertical resolution 768),

1600 x 900 or 1280 x 960 (horizontal frequency 60kHz, vertical frequency 60Hz),

1680 x 1050 or 1400 x 1050 (vertical resolution 1050).

Color

Color Control System: Six color presets select the desired color setting (sRGB and NATIVE color presets are

standard and cannot be changed).

1, 2, 3, 5: Increases or decreases Red, Green or Blue color depending upon which is selected. The change in color will

appear on screen and the direction (increase or decrease) will be shown by the bars.

NATIVE: Original color presented by the LCD panel that is unadjustable.

sRGB: sRGB mode dramatically improves the color ﬁ delity in the desktop environment by a single standard RGB color

space. With this color-supported environment, the operator could easily and conﬁ dently communicate color without

further color management overhead in most common situations.

NOTE: When MOVIE, GAMING, or PHOTO is selected as the DV MODE, NATIVE is selected automatically as the six

color preset and cannot be changed.

English-14

Tools

VOLUME

Controls the volume of the speakers or headphones.

To mute the speaker output, touch the “RESET/ECO MODE” key.

SOUND INPUT (HDMI, DisplayPort inputs only)

This function selects Audio Input, HDMI or DisplayPort.

VIDEO LEVEL (HDMI input only)

NORMAL: Disables the expanded feature.

EXPAND: Expands image contrast and increases details in the dark and bright areas.

OVER SCAN (HDMI input only)

Some video formats may require different scanning modes in order to best display the image.

ON: Image size is larger than what can be displayed. The image edge will appear cropped. Approximately 95% of the

image will be shown on the screen.

OFF: Image size stays within the display area. The whole image is displayed on the screen.

VIDEO DETECT

Selects the method of video detection when more than one video inputs are connected.

FIRST: When current video input signal is not present, then the monitor searches for a video signal from the other

video input port. If the video signal is present in the other port, then the monitor switches the video source input port

to the new found video source automatically. The monitor will not look for other video signals while the current video

source is present.

NONE: The monitor will not search the other video input port unless it is turned on.

EXPANSION MODE

Sets the zoom method.

FULL: The image is expanded to full screen, regardless of the resolution.

ASPECT: The image is expanded without changing the aspect ratio.

Note (EA243WM only): The resolution of 1280x768, 1360x768, 1280x720, 1600x900 and 1920x1080 are always

FULL.

OFF TIMER

Monitor will automatically power down when you have selected a pre-determined amount of time.

Before powering off, a message will appear on the screen asking if you want to delay the turn off time by 60 minutes.

Touch any OSD key to delay the power-down time.

LED BRIGHTNESS

You can adjust the blue LED brightness.

DDC/CI

This function allows the DDC/CI function ON or OFF.

FACTORY PRESET

Selecting Factory Preset allows you to reset all OSD control settings back to the factory settings. Individual settings

can be reset by touching the ECO (RESET) Key.

MENU Tools

LANGUAGE

OSD control menus are available in eight languages.

OSD TURN OFF

The OSD control menu will stay on as long as it is in use. You can select how long the monitor waits after the last touch

of a key to shut off the OSD control menu. The preset choices are 10-120 seconds by 5-second increments.

OSD LOCK OUT

This control completely locks out the access to all OSD control functions except for Brightness, Contrast and Volume.

To activate the OSD Lock Out function, enter the OSD menu, select OSD LOCK OUT, then press “SELECT” and

RIGHT simultaneously. To deactivate, press “SELECT” and LEFT simultaneously.

English-15

English

HOT KEY

When this function is activated, ECO Mode, BRIGHTNESS and VOLUME can be adjusted without entering the OSD

menu by using the front keys.

ON: The “ECO” touch key on the bezel is enabled and can toggle among ECO settings.

The Left/Right key adjusts the brightness level.

The Up/Down key adjusts the volume level.

OFF: The HOT KEY function for “ECO”, “Left/Right” and “Up/Down” functions are disabled.

SIGNAL INFORMATION

If you select “ON”, monitor displays “VIDEO INPUT MENU” after changing the input.

If you select “OFF”, monitor doesn’t display “VIDEO INPUT MENU” after changing the input.

SENSOR INFORMATION

If you select “ON”, monitor displays “HUMAN SENSOR ON” message. If you select “OFF”, monitor doesn’t display

“HUMAN SENSOR ON” message.

KEY GUIDE

If you select “ON”, the Key Guide appears on screen when the OSD control menu is accessed. The Key Guide will

rotate when the OSD control menu is rotated.

DATA COPY

To initiate data copy from the master monitor to the sub monitor(s), select “DATA COPY” and touch “SELECT”.

A “PROCEEDING...” indicator will appear on the screen.

NOTE: This function is only intended for the master monitor in ControlSync.

All of the settings speciﬁ ed in the ControlSync chart (see page 23) will be copied from the master monitor to

the sub monitor(s).

CUSTOMIZE SETTING

Store the current settings for easy recovery.

To store current settings: Touch “SELECT”. After a warning message appears, touch “RESET”, current settings are

stored.

To restore settings: Hold “MENU” for 3 seconds or more while the OSD menu is off.

ECO Information

CARBON SAVINGS: Displays the estimated carbon savings information in kg.

COST: Displays the electricity cost savings in balance.

CARBON CONVERT SETTING: Adjusts the carbon footprint factor in the carbon saving calculation. This initial setting

is based on the OECD (2008 Edition).

CURRENCY SETTING: Displays electricity pricing in 6 currency units.

CURRENCY CONVERT SETTING: Displays electricity savings in kW/hour (US Currency is default).

NOTE: This model’s initial setting is “Currency = US$” and its Currency Convert setting = $0.11.

This setting can be changed by using the ECO information menu.

If you want to use the French setting, please refer to steps below:

1. Touch the Menu key and select the ECO information menu using the “LEFT” or “RIGHT” key.

2. Select Currency setting item by touching the “UP” or “DOWN” key.

3. The French currency unit is Euro (

). You can adjust currency setting to Euro icon ( ) from US dollar ($)

by touching the “LEFT” or “RIGHT” key in Current setting item.

4. Select Currency Convert Setting by touching the “UP” or “DOWN” key*.

5. Adjust Currency Convert Setting by touching the “LEFT” or “RIGHT” key.

* This initial Euro (

) setting is Germany of OECD (2007 Edition).

Please check receipt of French’s electricity prices or OECD data for French.

French of OECD (2007 Edition) was

0.12.

English-16

Information

Provides information about the current resolution display and technical data including the preset timing being used and

the horizontal and vertical frequencies. Indicates the model and serial numbers of your monitor.

OSD Warning

OSD warning menus disappear when EXIT is selected.

NO SIGNAL: This function gives a warning when there is no horizontal or vertical sync. After power is turned on or

when there is a change of input signal, the No Signal window will appear.

OUT OF RANGE: This function gives a recommendation of the optimized resolution and refresh rate. After the power

is turned on or there is a change of input signal or if the video signal doesn’t have proper timing, the Out Of Range

menu will appear.

English-17

English

Speciﬁ cations - EA243WM

Monitor Speciﬁ cations MultiSync EA243WM Notes

LCD Module Diagonal:

Viewable Image Size:

Native Resolution (Pixel Count):

61.13 cm/24.1 inches

1920 x 1200

Active matrix; thin ﬁ lm transistor (TFT) liquid crystal

display (LCD); 0.270 mm dot pitch; 250 cd/m

white

luminance; 1000:1 contrast ratio (typical), (25000:1

Contrast ratio, Dynamic).

Input Signal

DisplayPort: DisplayPort Connector: Digital RGB DisplayPort Complies with Standard V1.1a,

applicable to HDCP

DVI: DVI-D 24pin: Digital RGB DVI (HDCP)

VGA: 15pin Mini D-sub: Analog RGB

Sync

0.7 Vp-p/75 ohm

Separate sync.TTL level Positive/Negative

Composite sync.TTL level Positive/Negative

Sync on Green

(Video 0.7 Vp-p and Sync Negative 0.3 Vp-p)

HDMI: HDMI Connector: Digital YUV

Digital RGB

HDMI

Display Colours 16,777,216 Depends on display card used.

Synchronization Range Horizontal:

Vertical:

31.5 kHz to 77.0 kHz (Analog)

31.5 kHz to 77.0 kHz (Digital)

56 Hz to 60 Hz

Automatically

Viewing Angle Left/Right:

Up/Down:

±85° (CR > 10)

±80° (CR > 10)

Image Formation Time 5 ms (Typ.)

Resolutions Supported 640 x 480*

@ 60 Hz Some systems may not support all modes listed.

800 x 600*

@ 56 Hz to 60 Hz

1024 x 768*

@ 60 Hz

1280 x 960*

@ 60 Hz

1280 x 1024*

@ 60 Hz

1400 x 1050*

@ 60 Hz

1440 x 900*

@ 60 Hz

1600 x 1200*

@ 60 Hz

1680 x 1050*

@ 60 Hz

1920 x 1200 @ 60 Hz........................................... NEC DISPLAY SOLUTIONS cites recommended.

Active Display Area Landscape: Horiz.:

Vert.:

Portrait: Horiz.:

Vert.:

518.4 mm/20.4 inches

324.0 mm/12.8 inches

518.4 mm/20.4 inches

USB Hub I/F:

Port:

Load Current:

USB Speciﬁ cation Revision 2.0

Upstream 1

Downstream 4

Maximum 0.5A per port

AUDIO

AUDIO Input: STEREO Mini Jack:

DisplayPort Connector:

HDMI Connector:

Analog Audio

Digital Audio

Stereo L/R 500mV rms 20 Kohm

PCM 2ch 32, 44.1, 48 kHz (16/20/24bit)

Headphone Output: STEREO Mini Jack: Headphone Impedance 32 Ohm

Speakers Practical Audio Output: 1.0 W + 1.0 W

ControlSync IN:

(available up to 5 sub monitors) OUT:

Stereo Micro jack 2.5 φ

Power Supply AC 100-240 V ~ 50/60 Hz

Current Rating 0.80 - 0.45 A (with USB and Audio)

Dimensions Landscape:

Portrait:

Height Adjustment:

556.2 mm (W) x 408.9 - 538.9 mm (H) x 230.0 mm (D)

21.9 inches (W) x 16.1 - 21.2 inches (H) x 9.1 inches (D)

359.6 mm (W) x 572.6 - 637.2 mm (H) x 230.0 mm (D)

14.2 inches (W) x 22.5 - 25.1 inches (H) x 9.1 inches (D)

130 mm / 5.1 inches (Landscape orientation)

64.6 mm / 2.5 inches (Portrait orientation)

Weight 7.0 kg (15.4 lbs)/Without stand: 4.1 kg (9.0 lbs)

Environmental Considerations

Operating Temperature:

Humidity:

Altitude:

Storage Temperature:

Humidity:

Altitude:

5°C to 35°C/41°F to 95°F

30% to 80%

0 to 6,562 Feet/0 to 2,000 m

-10°C to 60°C/14°F to 140°F

10% to 85%

0 to 40,000 Feet/0 to 12,192 m

*1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is normal and

necessary for all current ﬂ at panel technologies when displaying non-native resolutions full screen. In ﬂ at panel technologies, each dot on the screen is actually one

pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.

NOTE: Technical speciﬁ cations are subject to change without notice.

English-18

Speciﬁ cations - EA273WM

Monitor Speciﬁ cations MultiSync EA273WM Notes

LCD Module Diagonal:

Viewable Image Size:

Native Resolution (Pixel Count):

68.57 cm/27.0 inches

1920 x 1080

Active matrix; thin ﬁ lm transistor (TFT) liquid crystal

display (LCD); 0.311 mm dot pitch; 300 cd/m

white

luminance; 1000:1 contrast ratio (typical), (25000:1

Contrast ratio, Dynamic).

Input Signal

DisplayPort: DisplayPort Connector: Digital RGB DisplayPort Complies with Standard V1.1a,

applicable to HDCP

DVI: DVI-D 24pin: Digital RGB DVI (HDCP)

VGA: 15pin Mini D-sub: Analog RGB

Sync

0.7 Vp-p/75 ohm

Separate sync.TTL level Positive/Negative

Composite sync.TTL level Positive/Negative

Sync on Green

(Video 0.7 Vp-p and Sync Negative 0.3 Vp-p)

HDMI: HDMI Connector: Digital YUV

Digital RGB

HDMI

Display Colours 16,777,216 Depends on display card used.

Synchronization Range Horizontal:

Vertical:

31.5 kHz to 83.0 kHz (Analog)

31.5 kHz to 83.0 kHz (Digital)

56 Hz to 75 Hz

Automatically

Viewing Angle Left/Right:

Up/Down:

±80° (CR > 10)

Image Formation Time 5 ms (Typ.)

Resolutions Supported 720 x 400*

: VGA text Some systems may not support all modes listed.

640 x 480*

@ 60 Hz to 75 Hz

800 x 600*

@ 56 Hz to 75 Hz

832 x 624*

@ 75 Hz

1024 x 768*

@ 60 Hz to 75 Hz

1152 x 870*

@ 75 Hz

1280 x 1024*

@ 60 Hz to 75 Hz

1400 x 1050*

@ 60 Hz

1440 x 900*

@ 60 Hz

1920 x 1080 @ 60 Hz........................................... NEC DISPLAY SOLUTIONS cites recommended.

Active Display Area Landscape: Horiz.:

Vert.:

Portrait: Horiz.:

Vert.:

597.6 mm/23.5 inches

336.2 mm/13.2 inches

597.6 mm/23.5 inches

USB Hub I/F:

Port:

Load Current:

USB Speciﬁ cation Revision 2.0

Upstream 1

Downstream 4

Maximum 0.5A per port

AUDIO

AUDIO Input: STEREO Mini Jack:

DisplayPort Connector:

HDMI Connector:

Analog Audio

Digital Audio

Stereo L/R 500mV rms 20 Kohm

PCM 2ch 32, 44.1, 48 kHz (16/20/24bit)

Headphone Output: STEREO Mini Jack: Headphone Impedance 32 Ohm

Speakers Practical Audio Output: 1.0 W + 1.0 W

ControlSync IN:

(available up to 5 sub monitors) OUT:

Stereo Micro jack 2.5 φ

Power Supply AC 100-240 V ~ 50/60 Hz

Current Rating 0.95 - 0.50 A (with USB and Audio)

Dimensions Landscape:

Portrait:

Height Adjustment:

631.4 mm (W) x 415.0 - 545.0 mm (H) x 230.0 mm (D)

24.9 inches (W) x 16.3 - 21.5 inches (H) x 9.1 inches (D)

371.8 mm (W) x 647.2 - 674.8 mm (H) x 230.0 mm (D)

14.6 inches (W) x 25.5 - 26.6 inches (H) x 9.1 inches (D)

130 mm / 5.1 inches (Landscape orientation)

27.6 mm / 1.1 inches (Portrait orientation)

Weight 7.2 kg (15.9 lbs)/Without stand: 4.3 kg (9.5 lbs)

Environmental Considerations

Operating Temperature:

Humidity:

Altitude:

Storage Temperature:

Humidity:

Altitude:

5°C to 35°C/41°F to 95°F

30% to 80%

0 to 6,562 Feet/0 to 2,000 m

-10°C to 60°C/14°F to 140°F

10% to 85%

0 to 40,000 Feet/0 to 12,192 m

*1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is normal and

necessary for all current ﬂ at panel technologies when displaying non-native resolutions full screen. In ﬂ at panel technologies, each dot on the screen is actually one

pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.

NOTE: Technical speciﬁ cations are subject to change without notice.

Page is loading ...