Chapter 1 Installation Instructions
4
Step1. Shut down your computer and unplug the system power cord.
Step2. Take the case cover off. If there is any Graphics Card, please remove them.
Step3. Take the Graphics Card out from the static-proof bag and install it on the
motherboard carefully
Step4. Put on the case cover and connect the monitor or TV cables to the rear
Video output port of the Graphics Card.
Step5. Reboot your PC.
Install the Graphics Card
1. Be sure to unplug the AC power cord before adding or removing Graph-
ics Cards otherwise your motherboard or the Graphics Cards might be
seriously damaged.
2. Ensure you insert the Graphics Card in the correct slot. PCI-Express
cards differ from AGP cards, Make sure that you locate the correct slot,
otherwise you could cause damage to your PC.
3.To avoid damage from static electricity, make sure that you have dis-
charge the static electricity before installation.
4. Some Graphics Cards have an additional power connect; if your Graph-
ics Card has one, make sure that the connect is connected with the power
supply, or the Graphics Card may not work properly!
Attention:
PDF created with pdfFactory Pro trial version www.pdffactory.com