Fortress 64596 Owner's manual

Brand: Fortress

Model: 64596

Category: Air compressors

Type: Owner's manual

This manual is also suitable for

The Fortress 64596 is a powerful air compressor designed for heavy-duty tasks. With its 18-gallon tank, it can deliver up to 150 PSI of pressure, making it ideal for powering air tools, inflating tires, and painting. It also features an oil-free pump for easy maintenance and a low-noise design for quieter operation. Whether you're a professional contractor or a DIY enthusiast, the Fortress 64596 is a versatile tool that can handle a wide range of projects.

!"#"$%&'(%)*+#"$*%,$-%.$$/-00)))1.,(+&(2(*"3.$14&5

65,"7%&'(%$*4.8"4,7%#'//&($%,$-%/(&9'4$#'//&($:.,(+&(2(*"3.$14&5

Owner’s Manual & Safety Instructions

Save This Manual Keep this manual for the safety warnings and precautions, assembly,

operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the

back of the manual near the assembly diagram (or month and year of purchase if product has no number).

Keep this manual and the receipt in a safe and dry place for future reference. 18g

When unpacking, make sure that the product is intact

and undamaged. If any parts are missing or broken,

please call 1-888-866-5797 as soon as possible.

2018 by Harbor Freight Tools

No portion of this manual or any artwork contained herein may be reproduced in

any shape or form without the express written consent of Harbor Freight Tools.

Diagrams within this manual may not be drawn proportionally. Due to continuing

improvements, actual product may differ slightly from the product described herein.

Tools required for assembly an d se rv ic e may n ot b e in cl uded.

Read this material before using this product.

Failure to do so can result in serious injury.

SAVE THIS MANUAL.

Page 2 ;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1 Item 64592 64596

EF;6GH IJ6KFGLIM NFLMG6MFMO6LMEGFPPFGLIM

G,+7*%&2%O&8$*8$#

Safety ......................................................... 2

Installation .................................................. 6

Specifications ............................................. 6

Operation .................................................... 7

Maintenance ............................................... 9

Parts List and Diagram .............................. 12

Warranty .................................................... 16

QFKMLMR%EHNSIPE%FMT%T6;LMLGLIME

This is the safety alert symbol. It is used to alert you to potential

personal injury hazards. Obey all safety messages that

follow this symbol to avoid possible injury or death.

Indicates a hazardous situation which, if not avoided,

will result in death or serious injury.

Indicates a hazardous situation which, if not avoided,

could result in death or serious injury.

Indicates a hazardous situation which, if not avoided,

could result in minor or moderate injury.

Addresses practices not related to personal injury.

Page 3;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1Item 64592 64596

EF;6GHIJ6KFGLIMNFLMG6MFMO6 LMEGFPPFGLIM

LNJIKGFMG%EF;6GH%LM;IKNFGLIM

R*8*(,7%E,2*$U%Q,(8"83#

% QFKMLMR%K*,9%,77%#,2*$U%),(8"83#%,89%"8#$('4$"&8#1%%%

Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.

E,V*%,77%),(8"83#%,89%"8#$('4$"&8#%2&(%2'$'(*%(*2*(*84*1

The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible

conditions and situations that may occur. It must be understood by the operator that common sense

and caution are factors which cannot be built into this product, but must be supplied by the operator.

1. Q&(W%,(*,%#,2*$U

a. X**/%)&(W%,(*,%47*,8%,89%)*77%7"$1

Cluttered or dark areas invite accidents.

b. T&%8&$%&/*(,$*%$.*%O&5/(*##&(%"8%*Y/7&#"V*%

,$5&#/.*(*#=%#'4.%,#%"8%$.*%/(*#*84*%

&2%27,55,+7*%7"<'"9#=%3,#*#%&(%9'#$1

Compressor motors produce sparks

which may ignite the dust or fumes.

c. X**/%4."79(*8%,89%+U#$,89*(#%,),U%

2(&5%,8%&/*(,$"83%4&5/(*##&(1

2. 67*4$("4,7%#,2*$U

a. O&5/(*##&(%/7'3#%5'#$%5,$4.%$.*%&'$7*$1%%

M*V*(%5&9"2U%$.*%/7'3%"8%,8U%),U1%%

T&%8&$%'#*%,8U%,9,/$*(%/7'3#%)"$.%3(&'89*9%

4&5/(*##&(#1 Standard plugs and matching

outlets will reduce risk of electric shock.

b. T&%8&$%*Y/&#*%4&5/(*##&(%$&%(,"8%&(%)*$%

4&89"$"&8#1 Water entering a compressor

will increase the risk of electric shock.

c. T&%8&$%,+'#*%$.*%4&(91%%M*V*(%'#*%$.*%

4&(9%2&(%'8/7'33"83%$.*%4&5/(*##&(1%%

X**/%4&(9%,),U%2(&5%.*,$=%&"7=%#.,(/%*93*#%

&(%5&V"83%/,($#1%%Damaged or entangled

cords increase the risk of electric shock.

3. J*(#&8,7%#,2*$U

a. E$,U%,7*($=%),$4.%).,$%U&'%,(*%9&"83%,89%

'#*%4&55&8%#*8#*%).*8%&/*(,$"83%$."#%

4&5/(*##&(1%%T&%8&$%'#*%$."#%4&5/(*##&(%

)."7*%U&'%,(*%$"(*9%&(%'89*(%$.*%"827'*84*%

&2%9('3#=%,74&.&7%&(%5*9"4,$"&81 A moment

of inattention while operating a compressor

may result in serious personal injury.

b. Z#*%/*(#&8,7%/(&$*4$"V*%*<'"/5*8$1%%

F7),U#%)*,(%FMEL?,//(&V*9%*U*%

/(&$*4$"&8%9'("83%#*$'/%,89%'#*1

c. J(*V*8$%'8"8$*8$"&8,7%#$,($"831%%68#'(*%$.*%

#)"$4.%"#%"8%$.*%&22?/&#"$"&8%+*2&(*%4&88*4$"83%

$&%/&)*(%#&'(4*%&(%5&V"83%$.*%4&5/(*##&(1

4. O&5/(*##&(%'#*%,89%4,(*

a. T&%8&$%'#*%$.*%4&5/(*##&(%"2%$.*%#)"$4.%

9&*#%8&$%$'(8%"$%&8%,89%&221 Any compressor

that cannot be controlled with the switch

is dangerous and must be repaired.

b. T"#4&88*4$%$.*%/7'3%2(&5%$.*%/&)*(%#&'(4*%

+*2&(*%5,W"83%,8U%,9['#$5*8$#=%4.,83"83%

,44*##&("*#=%&(%#$&("83%$.*%4&5/(*##&(1

Such preventive safety measures reduce the

risk of starting the compressor accidentally.

c. E$&(*%,8%"97*%4&5/(*##&(%&'$%&2%$.*%(*,4.%

&2%4."79(*8%,89%9&%8&$%,77&)%/*(#&8#%

'82,5"7",(%)"$.%$.*%4&5/(*##&(%&(%$.*#*%

"8#$('4$"&8#%$&%&/*(,$*%"$1 A compressor is

dangerous in the hands of untrained users.

d. N,"8$,"8%$.*%4&5/(*##&(1%%X**/%$.*%

4&5/(*##&(%47*,8%2&(%+*$$*(%,89%#,2*(%

/*(2&(5,84*1%%;&77&)%"8#$('4$"&8#%2&(%

7'+("4,$"83%,89%4.,83"83%,44*##&("*#1%%

X**/%9(U=%47*,8%,89%2(**%2(&5%&"7%,89%3(*,#*1%%

O.*4W%2&(%5"#,7"385*8$%&(%+"89"83%&2%5&V"83%

/,($#=%+(*,W,3*%&2%/,($#%,89%,8U%&$.*(%

4&89"$"&8%$.,$%5,U%,22*4$%$.*%4&5/(*##&(\#%

&/*(,$"&81%%L2%9,5,3*9=%.,V*%$.*%4&5/(*##&(%

(*/,"(*9%+*2&(*%'#*1 Many accidents are

caused by a poorly maintained compressor.

e. Z#*%$.*%4&5/(*##&(%"8%,44&(9,84*%)"$.%

$.*#*%"8#$('4$"&8#=%$,W"83%"8$&%,44&'8$%

$.*%)&(W"83%4&89"$"&8#%,89%$.*%)&(W%$&%

+*%/*(2&(5*91 Use of the compressor for

operations different from those intended

could result in a hazardous situation.

5. E*(V"4*

a. ],V*%U&'(%4&5/(*##&(%#*(V"4*9%+U%,%

<',7"2"*9%(*/,"(%/*(#&8%'#"83%&87U%"9*8$"4,7%

(*/7,4*5*8$%/,($#1 This will ensure that the

safety of the compressor is maintained.

Page 4 ;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1 Item 64592 64596

EF;6GH IJ6KFGLIM NFLMG6MFMO6LMEGFPPFGLIM

F"(%O&5/(*##&(%E,2*$U%Q,(8"83#

1. K"#W%&2%2"(*%&(%*Y/7&#"&8%?%9&%8&$%#/(,U%

27,55,+7*%7"<'"9%"8%,%4&82"8*9%,(*,%&(%$&),(9#%,%

.&$%#'(2,4*1%%E/(,U%,(*,%5'#$%+*%)*77?V*8$"7,$*91%%

T&%8&$%#5&W*%)."7*%#/(,U"83%&(%#/(,U%).*(*%

#/,(W%&(%27,5*%"#%/(*#*8$1%%F(4"83%/,($#%?%W**/%

4&5/(*##&(%,$%7*,#$%^_%2**$%,),U%2(&5%*Y/7&#"V*%

V,/&(#=%#'4.%,#%).*8%#/(,U"83%)"$.%,%#/(,U%3'81

2. K"#W%&2%+'(#$"83%?%9&%8&$%,9['#$%(*3'7,$&(%."3.*(%

$.,8%5,(W*9%5,Y"5'5%/(*##'(*%&2%,$$,4.5*8$1

3. K"#W%&2%"8['(U%?%9&%8&$%9"(*4$%,"(%

#$(*,5%,$%/*&/7*%&(%,8"5,7#1

4. T&%8&$%'#*%$&%#'//7U%+(*,$."83%,"(1

5. T&%8&$%7*,V*%4&5/(*##&(%'8,$$*89*9%

2&(%,8%*Y$*89*9%/*("&9%)."7*%/7'33*9%"81%%

Z8/7'3%4&5/(*##&(%,2$*(%)&(W"831

6. X**/%4&5/(*##&(%)*77?V*8$"7,$*91%%

T&%8&$%4&V*(%4&5/(*##&(%9'("83%'#*1

7. Drain Tank daily and after use. Internal rust causes

tank failure and explosion.

8. Do not remove the valve cover or

adjust internal components.

9. Compressor head gets hot during operation.

Do not touch it or allow children nearby

during or immediately following operation.

10. Do not use the air hose to move the compressor.

11. Release the pressure in the

storage tank before moving.

12. The use of accessories or attachments not

recommended by the manufacturer may

result in a risk of injury to persons.

13. All air line components, including hoses, pipe,

connectors, filters, etc., must be rated for a minimum

working pressure of 150 PSI, or 150% of the

maximum system pressure, whichever is greater.

14. USE OF AN EXTENSION CORD IS NOT

RECOMMENDED. If you choose to use an

extension cord, use the following guidelines:

GFSP6%F-%%K6OINN6MT6T%NLMLNZN%QLK6%

RFZR6%;IK%6`G6MELIM%OIKTE%

a>^_%!IPGb

MFN6JPFG6%

FNJ6K6E

a,$%2'77%7&,9b

6`G6MELIM%OIKT%

P6MRG]

25′ 50′ 100′ 150′

0 – 6 18 16 16 14

6.1 – 10 18 16 T&%8&$%'#*1

10.1 – 12 16 16 T&%8&$%'#*1

12.1 – 16 14 12 T&%8&$%'#*1

a. Make sure your extension cord

is in good condition.

b. Be sure to use an extension cord which

is heavy enough to carry the current your

product will draw. An undersized cord will

cause a drop in line voltage resulting in loss

of power and overheating. Table A shows the

correct size to use depending on cord length

and nameplate ampere rating. If in doubt,

use the next heavier gauge. The smaller

the gauge number, the heavier the cord.

15. Industrial applications must follow OSHA guidelines.

16. Maintain labels and nameplates on the

compressor. These carry important safety

information. If unreadable or missing, contact

Harbor Freight Tools for a replacement.

17. This product is not a toy.

Keep it out of reach of children.

18. People with pacemakers should consult their

physician(s) before use. Electromagnetic fields in

close proximity to heart pacemaker could cause

pacemaker interference or pacemaker failure.

%EF!6%G]6E6%LMEGKZOGLIME1

Page 5;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1Item 64592 64596

EF;6GHIJ6KFGLIMNFLMG6MFMO6 LMEGFPPFGLIM

R(&'89"83

GI%JK6!6MG%6P6OGKLO%E]IOX%FMT%T6FG]%%

;KIN%LMOIKK6OG%RKIZMTLMR%QLK6%OIMM6OGLIM-%

O.*4W%)"$.%,%<',7"2"*9%*7*4$("4",8%"2%U&'%,(*%"8%9&'+$%,#%$&%).*$.*(%$.*%&'$7*$%"#%

/(&/*(7U%3(&'89*91%%T&%8&$%5&9"2U%$.*%/&)*(%4&(9%/7'3%/(&V"9*9%)"$.%$.*%4&5/(*##&(1%%

M*V*(%(*5&V*%$.*%3(&'89"83%/(&83%2(&5%$.*%/7'31%%T&%8&$%'#*%$.*%4&5/(*##&(%"2%$.*%/&)*(%4&(9%&(%/7'3%

"#%9,5,3*91%%L2%9,5,3*9=%.,V*%"$%(*/,"(*9%+U%,%#*(V"4*%2,4"7"$U%+*2&(*%'#*1%%L2%$.*%/7'3%)"77%8&$%2"$%$.*%&'$7*$=%

.,V*%,%/(&/*(%&'$7*$%"8#$,77*9%+U%,%<',7"2"*9%*7*4$("4",81

>>_?>^_%!FO%R(&'89*9%O&5/(*##&(#-%O&5/(*##&(#%)"$.%G.(**%J(&83%J7'3#

1. In the event of a malfunction or breakdown,

grounding provides a path of least resistance for

electric current to reduce the risk of electric shock.

This compressor is equipped with an electric

cord having an equipment-grounding conductor

and a grounding plug. The plug must be

plugged into a matching outlet that is properly

installed and grounded in accordance

with all local codes and ordinances.

2. Do not modify the plug provided –

if it will not fit the outlet, have the proper

outlet installed by a qualified electrician.

3. Improper connection of the equipment-grounding

conductor can result in a risk of electric shock.

The conductor with insulation having an outer

surface that is green with or without yellow

stripes is the equipment-grounding conductor.

If repair or replacement of the electric cord or

plug is necessary, do not connect the equipment-

grounding conductor to a live terminal.

4. Check with a qualified electrician or service

personnel if the grounding instructions are

not completely understood, or if in doubt as to

whether the compressor is properly grounded.

5. Use only 3-wire extension cords that have

3-prong grounding plugs and 3-pole receptacles

that accept the compressor’s plug.

6. Repair or replace damaged or

worn cord immediately.

R(&'89"83%

J"8

>^B%!FO%c?J(&83%J7'3%,89%I'$7*$

a2&(%'/%$&%>^B%!FO%,89%'/%$&%>B%Fb

7. This compressor is intended for use on a

circuit that has an outlet that looks like the one

illustrated above in >^B%!FO%c?J(&83%J7'3%

,89%I'$7*$. The compressor has a grounding

plug that looks like the plug illustrated above

in >^B%!FO%c?J(&83%J7'3%,89%I'$7*$.

8. The outlet must be properly installed and grounded

in accordance with all codes and ordinances.

9. Do not use an adapter to connect this

compressor to a different outlet.

EU5+&7&3U

JEL

Pounds per square inch of pressure

O;N

Cubic Feet per Minute flow

EO;N

Cubic Feet per Minute flow

at standard conditions

MJG

National pipe thread, tapered

MJE

National pipe thread, straight

Double Insulated

Volts

Alternating Current

Amperes

Page 6 ;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1 Item 64592 64596

EF;6GH IJ6KFGLIM NFLMG6MFMO6LMEGFPPFGLIM

E/*4"2"4,$"&8#

AeBD^%?%>%R,77&8% AeBDA%?%^%R,77&8

Electrical Rating 120VAC / 60Hz / 3A 120VAC / 60Hz / 7A

Air Outlet Size 1/4″ - 18 NPT 1/4″ - 18 NPT

Air Pressure

Shut-off 135 PSI 135 PSI

Restart 105 PSI 105 PSI

Air Tank Capacity 1 Gallon 2 Gallons

Air Flow Capacity 0.7 SCFM @ 90 PSI 2.1 SCFM @ 90 PSI

Sound Level 57 dBA 60 dBA

L8#$,77,$"&8

%K*,9%$.*%6MGLK6%LNJIKGFMG%EF;6GH%LM;IKNFGLIM%#*4$"&8%,$%$.*%+*3"88"83%&2%$."#%

5,8',7%"847'9"83%,77%$*Y$%'89*(%#'+.*,9"83#%$.*(*"8%+*2&(*%#*$%'/%&(%'#*%&2%$."#%/(&9'4$1

GI%JK6!6MG%E6KLIZE%LMfZKH%;KIN%FOOLT6MGFP%IJ6KFGLIM-%

G'(8%$.*%J&)*(%E)"$4.%gI;;h%,89%'8/7'3%$.*%F"(%O&5/(*##&(%2(&5%"$#%*7*4$("4,7%

&'$7*$%+*2&(*%,##*5+7"83%&(%5,W"83%,8U%,9['#$5*8$#%$&%$.*%F"(%O&5/(*##&(1

M&$*- For additional information regarding the parts listed in the following pages,

refer to the Assembly Diagram near the end of this manual.

;'84$"&8#

T(,"8%

!,7V*

AeBD^%?%>%R,77&8%,89%AeBDA%?%^%R,77&8

J&)*(%

E)"$4.

F"(%

I'$7*$

^89%F"(%

I'$7*$

aAeBDA%&87Ub

G,8W%

R,'3*

I'$7*$%

R,'3*

K*3'7,$&(

Page 7;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1Item 64592 64596

EF;6GHIJ6KFGLIMNFLMG6MFMO6 LMEGFPPFGLIM

S(*,W"83%"8%$.*%F"(%O&5/(*##&(

1. Turn Power Switch OFF

and unplug Power Cord.

2. Fully open Drain Valve.

3. Plug in Power Cord.

4. Turn Power Switch to AUTO.

5. Let unit run for 30 minutes. Air will expel freely

through the Drain Valve.

6. Turn Power Switch OFF.

7. Unplug Power Cord and close Drain Valve.

I/*(,$"83%L8#$('4$"&8#

%K*,9%$.*%6MGLK6%LNJIKGFMG%EF;6GH%LM;IKNFGLIM%#*4$"&8%,$%$.*%+*3"88"83%&2%$."#%

5,8',7%"847'9"83%,77%$*Y$%'89*(%#'+.*,9"83#%$.*(*"8%+*2&(*%#*$%'/%&(%'#*%&2%$."#%/(&9'4$1

F"(%O&5/(*##&(%F(*,%E*$%Z/

1. Designate a work area that is clean and well-lit.

The work area must not allow access by

children or pets to prevent injury.

2. Locate the Air Compressor on a flat level surface

to ensure proper pump lubrication and to prevent

damage to the unit. Keep at least 12″ of space

around the unit to allow air circulation.

3. Route the power cord from the Air Compressor

to the grounded wall outlet, along a safe path

without creating a tripping hazard or exposing

the power cord to possible damage.

F"(%O&88*4$"&8%E*$'/

1. Connect a 1/4″ NPT air hose (sold separately)

to the Air Outlet. The air hose must be long

enough to reach the work area with enough extra

length to allow free movement while working.

2. Consult air tool’s manual for needed accessories.

R*8*(,7%I/*(,$"&8

1. Close Drain Valve.

2. Close Regulator.

3. Plug Power Cord into a grounded

120VAC electrical outlet.

4. Turn Power Switch to AUTO.

5. Allow Air Compressor to build up

pressure until it cycles off.

M&$*- At the beginning of the day’s first use

of the Air Compressor, check for air leaks by

applying soapy water to connections while the

Air Compressor is pumping and after pressure

cut-out. Look for air bubbles. If air bubbles are

present at connections, tighten connections.

Do not use the Air Compressor unless all

connections are air tight, the extra air leaking

out will cause the Air Compressor to operate too

often, increasing wear on the Air Compressor.

Page 8 ;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1 Item 64592 64596

EF;6GH IJ6KFGLIM NFLMG6MFMO6LMEGFPPFGLIM

M&$*- As long as the Power Switch is set to AUTO, the

operation of the Air Compressor is automatic, controlled

by an internal pressure switch. The Air Compressor will

turn on automatically when the air pressure drops to 105

PSI, and will turn off automatically when the

air pressure reaches 135 PSI.

QFKMLMRi%GI%JK6!6MG%E6KLIZE%

LMfZKH%FMT%T6FG]%;KIN%

6`JPIELIM-

T&%8&$%,9['#$%$.*%"8$*(8,7%

/(*##'(*%#)"$4.1%%Any change to the

automatic pressure levels may cause excess pressure to

accumulate, causing a hazardous situation.

6. Make sure the air tool’s throttle or switch is in the

OFF position. Connect the air tool to the air hose.

7. Adjust the Regulator Knob so that the air

output is enough to properly power the tool,

but the output will not exceed the tool’s

maximum air pressure at any time. Turn the

knob clockwise to increase the pressure and

counter-clockwise to decrease pressure. Adjust

the pressure gradually, while checking the

Outlet Pressure gauge to set the pressure.

8. Use the air tool as needed.

9. When finished, turn the Power Switch OFF.

10. Unplug the Air Compressor.

11. Bleed air from the tool then disconnect the tool.

12. Open the tank’s Drain Valve slowly to gradually

release tank pressure and any built-up moisture.

Close the Drain after air and moisture have

drained out. Do not remove the Drain Valve.

13. Clean, then store the Air Compressor indoors.

65*(3*84U%T*/(*##'("j,$"&8

If it is necessary to quickly depressurize the Air Compressor, turn the Power Switch OFF.

Then, pull on the ring on the Safety Valve to quickly release stored air pressure.

E,2*$U%

!,7V*

F'$&5,$"4%E.'$%&22%EU#$*5

1. If the Air Compressor automatically shuts off

before reaching its normal cutoff pressure:

a. Shut off all tools.

b. Turn Power Switch to OFF position.

c. Unplug Air Compressor.

d. Wait until the Air Compressor

cools down (about 10 minutes).

e. AeBD^%? >%R,77&8

• Push Reset Button.

• Plug Air Compressor in.

• Turn Power Switch to AUTO.

f. AeBDA%? ^%R,77&8

• Plug Air Compressor in.

• Turn Power Switch to AUTO.

g. Resume operation.

2. Possible causes of repeated automatic

shut off of the Air Compressor are:

a. Using an extension cord that

is too long or narrow;

b. An air leak or open hose causing

the Air Compressor to cycle too

often and build up heat;

c. Turning Air Compressor off and

on again too quickly.

3. Correct any issues before further use to

avoid damage to the Air Compressor.

Page 9;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1Item 64592 64596

EF;6GHIJ6KFGLIMNFLMG6MFMO6 LMEGFPPFGLIM

N,"8$*8,84*%,89%E*(V"4"83

%J(&4*9'(*#%8&$%#/*4"2"4,77U%*Y/7,"8*9%"8%$."#%5,8',7%5'#$%

+*%/*(2&(5*9%&87U%+U%,%<',7"2"*9%$*4.8"4",81

GI%JK6!6MG%E6KLIZE%LMfZKH%;KIN%FOOLT6MGFP%IJ6KFGLIM-%

G'(8%$.*%J&)*(%E)"$4.%gI;;h%,89%'8/7'3%$.*%F"(%O&5/(*##&(%2(&5%"$#%*7*4$("4,7%&'$7*$%

+*2&(*%/*(2&(5"83%,8U%"8#/*4$"&8=%5,"8$*8,84*=%&(%47*,8"83%/(&4*9'(*#1

GI%JK6!6MG%E6KLIZE%LMfZKH%;KIN%FLK%OINJK6EEIK%;FLPZK6-%

T&%8&$%'#*%9,5,3*9%*<'"/5*8$1%%L2%,+8&(5,7%8&"#*%&(%V"+(,$"&8%&44'(#=%

.,V*%$.*%/(&+7*5%4&((*4$*9%+*2&(*%2'($.*(%'#*1

O7*,8"83=%N,"8$*8,84*=%,89%P'+("4,$"&8

1. S6;IK6%6FO]%ZE6= inspect the general

condition of the air Air Compressor. Check for:

• loose hardware,

• misalignment or binding of moving parts,

• cracked or broken parts,

• damaged electrical wiring, and

• any other condition that may

affect its safe operation.

2. F;G6K%ZE6= wipe external surfaces of the

Air Compressor with a clean cloth.

3. QFKMLMRi%%L2%$.*%#'//7U%4&(9%&2%$."#%F"(%

O&5/(*##&(%"#%9,5,3*9=%"$%5'#$%+*%(*/7,4*9%

&87U%+U%,%<',7"2"*9%#*(V"4*%$*4.8"4",81

N,"8$*8,84*%E4.*9'7*

Following are general guidelines for maintenance checks of the Air Compressor.

M&$*- The environment in which the Air Compressor is used, and the frequency of use will affect how

often you will need to check the Air Compressor components and perform maintenance procedures.

T,"7U-

a. Make sure all nuts and bolts are tight.

b. Drain moisture from air tank.

c. Check for abnormal noise or vibration.

d. Check for air leaks.

e. Wipe off any oil or dirt from the Air Compressor.

* To check for air leaks, apply soapy water to joints while

the Air Compressor is pressurized. Look for air bubbles.

Q**W7U-

a. Inspect Air Filter.

N&8$.7U-

a. Inspect Safety Valve.

Page 10 ;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1 Item 64592 64596

EF;6GH IJ6KFGLIM NFLMG6MFMO6LMEGFPPFGLIM

T(,"8"83%N&"#$'(*%2(&5%F"(%G,8W

The Moisture Drain is located under the Tank. It must be used daily to release all trapped air and

moisture from the Tank. Doing this will eliminate condensation and prevent tank corrosion.

1. Turn the Power Switch off.

2. Turn the Drain Valve to open it.

3. When all the pressure and moisture is released,

close the Moisture Drain.

F"(%;"7$*(%N,"8$*8,84*

1. Remove Cover and Filter. Check

Filter for accumulated dirt.

F"(%L87*$%

;"7$*(%O&V*(

F"(%L87*$%

;"7$*(%

G'+*

2. O7*,8"83-%

a. To prevent injury from dust and debris,

wear ANSI-approved safety goggles,

NIOSH-approved dust mask/respirator,

and heavy-duty work gloves. In a

well-ventilated area away from bystanders,

use pressurized air (no more than 15 PSI)

to blow dust out of the filter.

b. Replace the clean filter. Replace the Cover,

making sure the Tube is facing down.

3. K*/7,4*5*8$#-

a. Air Inlet Filter only:

Paper Filter Element 2-1/4″ Outer Diameter.

b. Air Inlet Filter Assembly:

Inlet Filter Silencer Male 1/4″ NPT.

Page 11;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1Item 64592 64596

EF;6GHIJ6KFGLIMNFLMG6MFMO6 LMEGFPPFGLIM

G(&'+7*#.&&$"83

J(&+7*5 J&##"+7*%O,'#*# P"W*7U%E&7'$"&8#

Compressor does

not start or restart

1. Tank(s) already pressurized.

2. Power cord not plugged in properly.

3. Incorrect power supply.

4. No power at outlet.

5. Thermal overload switch tripped.

6. Building power supply circuit tripped

or blown fuse.

7. Cord wire size is too small or

cord is too long to properly

power compressor.

8. Compressor needs service.

1. No problem. Compressor will start when needed.

2. Check that cord is plugged in securely.

3. Check that circuit matches compressor requirements.

4. Reset circuit breaker, or have outlet

serviced by a qualified technician.

5. Turn off Compressor and wait for it to cool down.

Press reset button. Resume operation.

6. Reset circuit or replace fuse. Check for low voltage conditions.

It may be necessary to disconnect other electrical appliances

from the circuit or move the compressor to its own circuit.

7. Use larger diameter or shorter extension cord or

eliminate extension cord. See Recommended Wire

Gauge for Extension Cords in Safety section.

8. Have unit inspected by a qualified technician.

Compressor builds

pressure too slowly

1. Incorrect power supply.

2. Working environment too cold.

3. Safety valve leaking.

4. Loose fittings.

1. Check that circuit matches compressor requirements.

2. Move compressor to a warmer location.

3. Listen for air leaking from valve.

If leaking, replace with identical valve with same rating.

TI%MIG%E6FP%IK%GFNJ6K%QLG]%EF;6GH%!FP!61

4. Reduce air pressure, then check all fittings with a soap solution

for air leaks and tighten as needed. Do not overtighten.

Compressor not

building enough

air pressure

1. Air filter needs cleaning/replacing.

2. Check Valve needs service.

3. Compressor not large enough for

job.

4. Loose fittings.

5. Hose or hose connections

too narrow.

6. High altitude reducing air output.

1. Check inlet filter.

Clean and/or replace as needed.

2. Have technician clean or replace, as needed.

3. Check if accessory CFM is met by Compressor.

If Compressor cannot supply enough

air flow (CFM), use a larger Compressor.

4. Reduce air pressure, then check all fittings with a soap solution

for air leaks and tighten as needed. Do not overtighten.

5. Replace with wider hose and/or hose connections.

6. Higher altitudes require compressors with greater output.

Overheating 1. Air filter needs cleaning/replacing.

2. Unusually dusty environment.

3. Extension cord used.

1. Check inlet filter.

Clean and/or replace as needed.

2. Clean and/or replace filter more often or

move unit to cleaner environment.

3. Eliminate extension cord.

Compressor

starts and stops

excessively

1. Loose fittings.

2. Compressor not large

enough for job.

1. Reduce air pressure, then check all fittings with a soap solution

for air leaks and tighten as needed. Do not overtighten.

2. Check if accessory SCFM is met by Compressor.

If Compressor cannot supply enough

air flow (SCFM), use a larger Compressor.

Excessive noise Loose fittings. Reduce air pressure, then check all fittings with a soap solution

for air leaks and tighten as needed. Do not overtighten.

Moisture in

discharge air

Too much moisture in air. Install inline air filter/dryer, and/or relocate

to less humid environment.

Safety Valve “pops” Safety valve needs service. Pull on the ring on the Safety Valve. If it still pops, replace.

Air leaks from

pump or fittings

Loose fittings. Reduce air pressure, then check all fittings with a soap solution

for air leaks and tighten as needed. Do not overtighten.

Air leaks from tank Defective or rusted tank. Have tank replaced by a qualified technician.

Drain moisture from tank daily to prevent future corrosion.

% ;&77&)%,77%#,2*$U%/(*4,'$"&8#%).*8*V*(%9",38&#"83%&(%#*(V"4"83%$.*%4&5/(*##&(1%%%

T"#4&88*4$%/&)*(%#'//7U%+*2&(*%#*(V"4*1

Page 12 ;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1 Item 64592 64596

EF;6GH IJ6KFGLIM NFLMG6MFMO6LMEGFPPFGLIM

J,($#%P"#$%,89%T",3(,5

JP6FE6%K6FT%G]6%;IPPIQLMR%OFK6;ZPPH

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM

IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR

MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS

QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE

ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY

STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND

LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY

ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS

THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

AeBD^%J,($#%P"#$

J,($ T*#4("/$"&8 k$U

1 Screw 8

2 Flat Washer 8

3 Pump Head 2

4 Screw 4

5 Range Limiter 4

6 Valve Block 4

7 Seal 2

8 Valve Board 2

9 Valve Block Clamp 2

10 O-Ring 2

11 Screw 2

12 Cylinder 2

13 Piston Cap 2

14 Piston Ring 2

15 Connecting Rod 2

16 Screw 4

17 O-ring 4

18 Tube 2

19 Screw 6

20 Ground 1

21 Fan Housing 2

22 Fan 1

23 Screw 2

24 Crank 2

25 Bearing 2

26 Left Crankcase 1

27 Bearing 2

28 Rotor 1

29 Stator 1

30 Spring Gasket 4

31 Bolt 4

32 Right Crankcase 1

33 Spring 2

34 Fan 1

35 Pump Head 2

Air Inlet Filter Silencer

Male 1/4" NPT

37 Air Inlet Filter Tube 1

J,($ T*#4("/$"&8 k$U

38 Screw 4

39 Pump Head Cover 2

40 Pump Head Cover Clamp 2

41 Shock Pad 4

42 Lock Nut 4

43 Nylon Pipe 1

44 Lock Nut 1

45 Sleeve 1

46 Lining 2

47 Elbow 1

48 Flexible Tube 1

49 Check Valve 1

50 Thermal Reset Capacitor 1

51 Screw 2

52 Thermal Reset Cover 1

53 Protector 1

54 Bolt 4

55 Cushion 4

56 Foot Pad 4

57 Tank 1

58 Drain Valve 1

59 Nut 2

60 Joint 1

61 Screw 2

62 Safety Valve 1

63 Regulator 1

64 Pressure Gauge 2

65 Quick Connect 1

66 Control Panel 1

67 Bolt 6

68 Pipe 1

69 Elbow 1

70 Power Cord Buckle 3

71 Power Switch 1

72 Swivel Joint 1

73 Swivel Joint Nut 1

74 Gasket 1

75 Handle Sleeve 1

76 Power Cord 1

K*4&(9%J(&9'4$\#%E*(",7%M'5+*(%]*(*-%

M&$*- If product has no serial number, record month and year of purchase instead.

M&$*- Some parts are listed and shown for illustration purposes only, and are not available individually

as replacement parts. Parts may not be interchangeable. Specify number when ordering.

Page 13;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1Item 64592 64596

EF;6GHIJ6KFGLIMNFLMG6MFMO6 LMEGFPPFGLIM

AeBD^%F##*5+7U%T",3(,5

68 59 69

Page 14 ;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1 Item 64592 64596

EF;6GH IJ6KFGLIM NFLMG6MFMO6LMEGFPPFGLIM

K*4&(9%J(&9'4$\#%E*(",7%M'5+*(%]*(*-%

M&$*- If product has no serial number, record month and year of purchase instead.

M&$*- Some parts are listed and shown for illustration purposes only, and are not available individually

as replacement parts. Parts may not be interchangeable. Specify number when ordering.

AeBDA%J,($#%P"#$

J,($ T*#4("/$"&8 k$U

1 Screw 8

2 Flat Washer 8

3 Pump Head 2

4 Seal 2

5 Screw 2

6 O-Ring 4

7 Tube 2

8 Range Limiter 2

9 Valve Block 4

10 Valve Board 2

11 Valve Block Clamp 2

12 Screw 2

13 O-Ring 2

14 Cylinder 2

15 Screw 2

16 Piston Cap 2

17 Piston Ring 2

18 Connecting Rod 2

19 Gasket 2

20 Fan Cover 2

21 Washer 2

22 Fan 1

23 Shock Pad 4

24 Screw 4

25 Crankcase 1

26 Screw 2

27 Bearing 2

28 Rotor 1

29 Lock Nut 4

30 Stator 1

31 Spring Gasket 4

32 Bolt 4

33 Lock Nut 4

34 Power Cord Buckle 4

35 Crankcase 1

36 Screw 4

37 Bearing 2

38 Crank 2

39 Fan 1

J,($ T*#4("/$"&8 k$U

40 Screw 2

41 Pump Head Cover 4

42 Inlet Filter Silencer Male 1/4″ NPT 1

43 Pipe 1

44 Power Cord 1

45 Control Panel 1

46 Bolt 6

47 Pressure Gauge 2

48 Screw 1

49 Regulator 1

50 Joint 1

51 Lock Nut 2

52 Quick Connect 2

53 Safety Valve 1

54 Handle Sleeve 1

55 Bolt 4

56 Lock Nut 4

57 Drain Valve 1

58 Frame 1

59 Foot Pad 4

60 Washer 4

61 Bolt 4

62 Power Switch 1

63 Joint 1

64 Elbow 1

65 Screw 2

66 Thermal Reset Cover 1

67 Thermal Reset Capacitor 1

68 Plug 1

69 Elbow 1

70 Lining 2

71 Pipe 1

72 Sleeve 1

73 Lock Nut 1

74 Pipe 1

75 Flexible Tube 1

76 Check Valve 1

77 Tank 1

78 Pump Head 1

Page 15;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?@AA?BCDC1Item 64592 64596

EF;6GHIJ6KFGLIMNFLMG6MFMO6 LMEGFPPFGLIM

AeBDA%F##*5+7U%T",3(,5

P"5"$*9%D_%T,U%Q,((,8$U

Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards,

and warrants to the original purchaser that this product is free from defects in materials and workmanship for the

period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly,

to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper

installation, normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, injuries

to persons or property, or for incidental, contingent, special or consequential damages arising from the use of

our product. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the

above limitation of exclusion may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER

WARRANTIES, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.

To take advantage of this warranty, the product or part must be returned to us with transportation charges

prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise.

If our inspection verifies the defect, we will either repair or replace the product at our election or we may

elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will

return repaired products at our expense, but if we determine there is no defect, or that the defect resulted

from causes not within the scope of our warranty, then you must bear the cost of returning the product.

This warranty gives you specific legal rights and you may also have other rights which vary from state to state.

ceD>%N"##"&8%I,W#%S7V91%%l%%JI%S&Y%A__D%%l%%O,5,("77&=%OF%Dc_>>%%l%%>?@@@?@AA?BCDC

Fortress 64596 Owner's manual

Brand: Fortress

Model: 64596

Category: Air compressors

Type: Owner's manual

This manual is also suitable for

Download PDF

report

Fortress 64596 Owner's manual

This manual is also suitable for

Fortress 64596 Owner's manual

Related papers

Other documents