Mitsumi FA402M Datasheet

Category
Card readers
Type
Datasheet
Model: 7in1 USB Media Drives Internal FA 402A and FA 402M
Platform: PC/AT compatible PC with FDD port
Supported OS: Windows 98
®
*/SE
®
*/2000®/Me
®
/XP
®
Interface: ATAPI/USB (standard Floppy interface and USB port on motherboard)
Transfer rate: FlashMedia 12Mbps maximum, Floppy disk 500Kbps maximum
Power consumption: 500mA max.
Weight: 430g
Supported formats: CompactFlash
TM
(Type-I/II), Microdrive
TM
*, SD Memory Card
TM
, MultiMedia Card
TM
,
Memory Stick
TM
, Smart Media
TM
, 3.5” FD
PC with minimum: PC/AT compatible PC with a free standard floppy and USB interface on motherboard
Media Drives
7in1 USB Media Drives Internal
Read CompactFlash™ (Type-I/II), Microdrive™,
SD Memory Card™, MultiMediaCard™, Memory
Stick™, Smart Media™, and 3.5" FD
Simple installation at the internal FFD port of your
computer
Operate like a further drive in your computer
The MITSUMI 7in1 USB Media Drives Internal are space-saving solutions for various multimedia cards and
floppy disks, right in your PC. The drives can be simply connected to the standard floppy interface of your PC
and are recognised by your computer as a further drive. Use the 7in1 USB Media Drives Internal just like you
would a normal hard disk for data, photos, MP3s and much, much more. Not only will you be able to read and
write floppy disks and memory cards, you will also be able to directly transfer data betwee
n floppy disks and
memory cards.
OPTICAL
Technical Specifications:
System Requirements:
Copyright 2004 Mitsumi Electronics Europe GmbH. All rights reserved. Subject to alterations regarding technical advances. (05/2004)
Pentium
®
is a registered trade-
mark of Intel Corporation.
Microsoft
®
, Windows
®
, and the
Windows logo are trademarks
or registered trademarks of
Microsoft Corporation in the
United States and/or other
countries. Other names and
brands may be claimed as the
property of others.
MITSUMI
Electronics Europe GmbH
Hammer Landstr. 89, 41460 Neuss, Germany
For complete product range visit www.mitsumi.de
Dimensions: 110mm (width) x 28mm (height) x 140mm (depth)
*Microdrive™ and FD cannot be used simultaneously.
FA 402A
FA 402M
  • Page 1 1

Mitsumi FA402M Datasheet

Category
Card readers
Type
Datasheet

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI