Meiji Techno FTM Series Owner's manual

Brand
Meiji Techno
Model
FTM Series
Type
Owner's manual

Meiji Techno FTM Series is a compact and lightweight fiber-optic LED light source with very high output, ideal for industrial applications where space is a premium. It features instant-on and extended electronic intensity dimming capabilities. The FTM Series is equipped with an ACMI receptacle to accommodate most common cable types and conveniently accepts a DC input voltage in portable battery operation.

Meiji Techno FTM Series is a compact and lightweight fiber-optic LED light source with very high output, ideal for industrial applications where space is a premium. It features instant-on and extended electronic intensity dimming capabilities. The FTM Series is equipped with an ACMI receptacle to accommodate most common cable types and conveniently accepts a DC input voltage in portable battery operation.

The FTM190
r-optic LED light source series combines state-of-the-art, solid-state
illumination technology with Ushio’s distinctive optical design to create a compact and
lightweight
r-optic lightbox with very high output that is ideal for industrial
applications where space is a premium. This mercury-free, long-life ULB-35 LED light
source has instant-on and extended electronic intensity dimming capabilities. Midori’s
,laminim si )RI raen( mn007 evoba dna )VU dna eulb peed( mn034 woleb tuptuo lartceps
which makes it ideal for sensitive applications.
The FTM190
r-optic light source is equipped with an ACMI receptacle to
accommodate most common
cable types. The FTM190 conveniently accepts a
DC input voltage in portable battery operation.
l
l
FEATURES & BENEFITS:
• Ultra Compact - Small Footprint Takes Very Little Space
• Energy
- Increased Light Intensity Coupled Into Smal
Fibers at Lower Wattage Operation
• Electronic Dimming - High Dynamic Range for Intensity Contro
• Lightweight - Less Than 1lb (0.45kg) for Exceptional Portability
• External Power Supply - Utility for Both AC and DC Operation
• Long Life - Less Maintenance and No Lamp Replacement Costs
• Low Noise - Both Electrical EMI and Audible Sound
APPLICATIONS:
• Industrial NDT Inspection
• Borescopy
• Microscopy
• Remote Visual Inspection
• Fiberscopes
• Flexible Videoscopes
• Industrial Fiber Optics
Made in USA
FIBER-OPTIC LED LIGHT SOURCE
FTM190
Fiber-Optic LED Light Source
* Based on LED manufacturer rated wattage and thermal operation.
• Intended for ber-optic cables ranging from 2mm to 6mm active area diameters. Outputs may vary.
All dimensions are in millimeters and inches.
ULB-35i has been tested and certied to comply with the following industrial EMC and safety specications:
• UL/EN/CSA 61010 • IEC 61347 • IEC 62471 •
Typical Spectral Profile
0
10
20
30
40
50
60
400 500 60
0 70
0
wavelength (nm)
Relative Intensit
y
NOMINAL SPECIFICATIONS
Color Lumen Average*
Watts
(W)
Ordering
Code
Lamp
Description
Temp
(K)
CRI Output
(lm)
Rate Life
(h)
Electrical
Input
35 1003884 FTM190 Power Supply LED 6500 72 1350 50,000
+ 12 vdc
[
[127 mm]
5.0”
[114 mm ]
4.5”
[90 mm]
3.5”
68 mm]
2.7”
[127 mm]
5.0”
[114 mm ]
4.5”
[90 mm]
3.5”
68 mm]
2.7”
FTM190
FTM190
Meiji Techno America
5895 Rue Ferrari San Jose, CA 95138
ph: 1(800) 832-0060 fax: (408) 226-0900
info@meijitechno.com
www.meijitechno.com
  • Page 1 1
  • Page 2 2

Meiji Techno FTM Series Owner's manual

Brand
Meiji Techno
Model
FTM Series
Type
Owner's manual

Meiji Techno FTM Series is a compact and lightweight fiber-optic LED light source with very high output, ideal for industrial applications where space is a premium. It features instant-on and extended electronic intensity dimming capabilities. The FTM Series is equipped with an ACMI receptacle to accommodate most common cable types and conveniently accepts a DC input voltage in portable battery operation.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents