Operating Instructions
RED 10
RED10 Operating Instructions
Foreword
We are pleased to welcome you as a new customer of our Sophos RED
appliances.
To install and configure the RED appliance you can use the following
documents:
Ì Sophos RED Appliance Quick Start Guide: Connection to the system
peripherals in a few steps
Ì Sophos RED Operating Instructions: Notes on the security and
commissioning of the hardware appliance
The Sophos RED appliance Quick Start Guide and the Security Notes are also
delivered in printed form together with the RED appliance. The instructions
must be read carefully prior to using the hardware and should be kept in a
safe place.
You may download all user manuals and additional documentation from the
support webpage at: astaro.com/support
Security Symbols
The following symbol and its meaning appears in the RED Appliance Quick
Start Guide, Security Notes and in these Operating Instructions.
Caution and Important Note. If these notes are not correctly observed:
Ì This is dangerous to life and the environment
Ì The appliance may be damaged
Ì The functions of the appliance will be no longer guaranteed
Ì Sophos shall not be liable for damages arising from a failure to comply
with the security notes
Designed Use
The hardware appliances are developed for use in networks. The Sophos
RED model may be operated as a standalone appliance. The RED appliance
can be used in commercial, industrial and residential environments. The RED
10 model belongs to the appliance group B.
The RED appliance must be installed pursuant to the current installation
notes. Otherwise the failure-free and safe operation cannot be guaranteed.
The EU declaration of conformity is available at the following address:
Astaro GmbH & Co. KG - a Sophos company
Amalienbadstr. 41/Bau 52
76227 Karlsruhe
Germany
RED10 Operating Instructions
CE Labeling, FCC and Approvals
The RED appliance complies with FCC Class B, CE, C-Tick, VCCI and UL.
Important Note: For computer systems to remain CE and FCC compliant,
only CE and FCC compliant parts may be used. Maintaining CE and FCC
compliance also requires proper cable and cabling techniques.
Operating Elements and Connections
Sophos RED 10 (rev.3)
Controls
Power (LED Display)
On continuously Power off
Blinking Power on
LAN Connection (LED Display)
On continuously Network connection, no activity
Blinking Network activity
Status Signals (LED Display)
System Router Internet Tunnel Normal Booting Procedure
System booting
System booted
Trying to connect to default gateway/
router
Default gateway/router reachable
Trying to connect to Internet
Internet connectivity up
Trying to connect to UTM
Connected to UTM
Device is installing a new firmware.
Do not power off
power
1 x 10/100
Base-TX port
1 x USB port
Power
10/100 Base-TX ports
status signal 4 x 10/100
Base-TX ports
RED10 Operating Instructions
United Kingdom Sales:
Tel: +44 (0)8447 671131
Email: [email protected]
North American Sales:
Toll Free: 1-866-866-2802
Email: [email protected]
Australia & New Zealand Sales
Tel: +61 2 9409 9100
Email: [email protected]
Boston, USA | Oxford, UK
© Copyright 2012. Sophos Ltd. All rights reserved.
All trademarks are the property of their respective owners.
Sophos Operating Instructions 02.12v1.dNA
System Router Internet Tunnel Error Codes
DHCP or static address settings don‘t
work, default gateway not reachable
Internet not reachable
No connection to UTM
No configuration or firmware
update failed
System Router Internet Tunnel GSM/UMTS Failover Active
GSM/UMTS failover active
Default gateway/router reachable
Internet connectivity up
Connected to UTM
off
blinking
On continuously
Putting Into Operation
Caution: Risk of explosion if battery is replaced by an incorrect type. Dispose
of used batteries according to the instructions.
Scope of Supply
The supplied parts are indicated in the Hardware Quick Start Guide.
Mounting Instructions
The RED appliances can be mounted to a stable horizontal surface.
Please consider the following security hints:
Warnings and Precautions
The appliance can be operated safely if you observe the following notes and
the notes on the appliance itself.
General Precautions
Ì Review the electrical and general safety precautions that came with the
components you are adding to your appliance.
Ì Allow the power supply modules to cool before touching them.
/