CyberData 10860 Owner's manual

Brand: CyberData

Model: 10860

Type: Owner's manual

This manual is also suitable for

Installation Quick Reference

VoIP Loudspeaker Amplifier

(Wireless, AC powered)

SiP Compliant

010860

Mounting the Enclosure

Contacting CyberData

To mount the enclosure:

1. Prepare holes for the screws.

2. Plug in the power adapter and use the

blue power light to verify that the power

is on.

3. Plug the Ethernet cable into the

loudspeaker amplifier. The yellow light

verifies the network connection.

4. For wall mounting, use the three

#8 SHEET METAL SCREWS to

secure the speaker.

Warranty

CyberData warrants its product against defects in material or workmanship for

a period of two years from the date of purchase. Should the product fail within

the warranty period, CyberData will repair or replace the product free of

charge. This warranty includes all parts and labor.

Should the product fail out-of-warranty, a flat rate repair charge of one half of

the purchase price of the product will be assessed. Repairs that are in

warranty but are damaged by improper modifications or abuse, will be

charged at the out-of-warranty rate. Products shipped to CyberData, both in

and out-of-warranty, are shipped at the expense of the customer. Shipping

charges for repaired products shipped back to the customer by CyberData,

will be paid by CyberData.

CyberData shall not under any circumstances be liable to any person for any

special, incidental, indirect or consequential damages, including without

limitation, damages resulting from use or malfunction of the products, loss of

profits or revenues or costs of replacement goods, even if CyberData is

informed in advance of the possibility of such damages.

For product service, contact the Returned Materials Authorization (RMA)

department. A product will not be accepted for return without an approved

RMA number. Send the product, in its original package, to: CyberData Corpo-

ration, 2555 Garden Road, Monterey, CA 93940, Attention: RMA “your RMA

number”

The most recent warranty information is available at:

Web: http://www.cyberdata.net/support/warranty/index.html

Corporate Headquarters

CyberData Corporation

2555 Garden Road

Monterey, CA 93940, USA

Phone: 831-373-2601

Fax: 831-373-4193

www.CyberData.net

Sales: (831) 373-2601 ext. 334

Support: 831-373-2601 ext. 333

Web: http://www.cyberdata.net/support/contactsupportvoip.html

RMA Dept: (831) 373-2601 ext. 136

Email: RMA@CyberData.net

RMA Status: http://www.cyberdata.net/support/rmastatus.html

Warranty information is available at:

Web: http://www.cyberdata.net/support/warranty/index.html

The Loudspeaker Amplifier (Wireless, AC powered) is a Voice-over-IP public address speaker that uses a single cable to

connect to existing LANs.

Typical Loudspeaker Amplifier System Installation

Getting Started

● Download the VoIP Loudspeaker Amplifier (Wireless, AC powered) Operations Guide PDF file at the VoIP Loudspeaker

Amplifier product page at:

http://www.cyberdata.net/support/voip/index.html

● Follow all instructions in the guide.

● Create a plan for the locations of your loudspeaker amplifiers.

● Prior to installation, consult local building and electrical code requirements.

Loudspeaker Amplifier Parts

Parameter Factory Default Setting

IP Addressing static

IP Address 192.168.3.10

Web Access Username admin

Web Access Password admin

Subnet Mask 255.255.255.0

Default Gateway 192.168.3.1

802.3af Compliant Ethernet Switch

VoIP Loudspeaker Amplifiers VoIP Phone SIP Server

12 34 56

Access Point

(1) Enclosure Assembly (1) Wall Mounting Kit

(3) Plastic Ribbed Anchors

(3) #8 Sheet Metal Screws

Loudspeaker Amplifier Features

Setting Up the Wireless Bridge

Speaker Volume

RTFM Switch

To broadcast a speaker’s current IP address,

press the RTFM switch on the speaker face.

When the speaker beeps after pressing the

switch for one second, release the switch to

hear the IP address announcement.

Press and hold the RTFM switch for 20

seconds. The speaker will beep after one

second. Continue to hold the switch until the

speaker beeps again after 20 seconds. Then,

release the switch. The speaker settings are

restored to the factory defaults. The speaker

broadcasts the restored default IP address, and

then announces that it is rebooting.

Network Link LED (green/yellow)

Speaker Status LED (green)

A blinking light confirms that the speaker is

operational.

Network Activity LED (green)

Speaker Power LED (blue/green)

Audio Line Out

To set up the wireless bridge for access to the loudspeaker amplifier web configuration access:

1. Set up the host PC ethernet IP address to 192.168.3.xxx where xxx is anything but 226 (default wireless bridge

address) or 010 (default loudspeaker amplifier IP address).

2. Connect an access point to the pc and set the ip address of the access point to 192.168.3.xxx where xxx is not 226,

010, or the ip address of the PC.

3. Set the access point ssid to linksys.

4. Power up the loudspeaker amplifier.

5. Open a web browser and enter the url: http://192.168.3.10. The amplifier speaker configuration page login page

should come up.

6. Follow the configuration instructions in the manual to configure the ip address and parameters for your network.

7. After configuration is complete, use the Bridge Setup Utility supplied with the amplifier to configure the wireless

bridge to the desired network configuration.

Connecting Power to the Loudspeaker Amplifier

8 Ohms

2 speakers in parallel (4 Ohm total)

AC Input*

Optional 2 Speaker Configuration

Standard 1 Speaker Configuration

*This AC connection needs to be

installed by a certified electrician.

Wireless Bridge

Amplifier

RCA cable

Existing System

CyberData 10860 Owner's manual

Brand: CyberData

Model: 10860

Type: Owner's manual

This manual is also suitable for

Download PDF

report

CyberData 10860 Owner's manual

This manual is also suitable for

CyberData 10860 Owner's manual

Related papers