Instruction Manual
Bluetooth Speaker - BPB10W
General Safety 4
What is in the box 6
Product Overview 7
Pairing Operation 9
Charging Instructions 10
Specifications 11
Support Information Last Page
CONTENTS
4
GENERAL SAFETY
Read this manual thoroughly before you start using the Speaker.
Store this manual, the completed warranty card, your receipt and the product packaging.
The safety precautions instructions reduces the risk of fire, electric shock and injury when
correctly complied to.
Please follow all instructions and take notice of all warnings.
• Ensure the Product is not overhanging the edge of the supporting furniture.
• Do not tamper or change or modify the product in any way.
• Only use Accessories outlined and recommended by the manufacturer.
• Please do not place any object on top of the product
IMPORTANT INFORMATION
This product must be positioned in a suciently stable location.
• No naked flame source, such as candles, should be placed on the product.
• Do not cover the ventilation openings of the product with items such as newspapers,
tablecloths, curtains etc or insert objects into the slots available on the products.
As this could result in the product temperature rising and could cause a fire.
5
GENERAL SAFETY (CONT.)
• If you notice any unusual odors or smoke around the unit, immediately switch o the
product and contact the service center. Failure to do so may result in fire or electric shock.
• Please beware that Dust could accumulate over time on the unit and cause it to generate
heat and or deteriorate insulation, which in turn may result in an electrical fire.
• The product is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or young children of any age, They must be supervised
product by a person responsible for their safety.
• To maintain the product do not use any chemical or cleaning agent or wet cloth, please
only ensure to utilize a dry cloth to wipe it down from marks or dust.
• Please ensure to contact our call center for any repair or service required for the products.
Please make sure upon positioning this product, the place is:
• Not wet or damp and Well ventilated
• Away from direct sunlight or heaters.
• Away from splashes or food.
• Protected from excessive dust or grease.
• Do not place this equipment in a confined space such as a bookcase or similar unit. Allow
20cm above and 5cm spacing on both sides for proper ventilation.
• Do not place the Product near heat sources such as radiators, stoves or other audio
visual equipment that produce heat.
• Do not place containers with liquids, if liquid falls inside the products it may result in
short-circuit, fire or electric shock.
• Do not place small metallic objects on top of the unit.
• Do not use or store flammable or combustible materials near the unit. Doing so may
result in fire or explosion. Do not place any naked flame sources, such as lit candles,
cigarettes or incense sticks on top of the product.
6
WHAT IS IN THE BOX
1 x Bluetooth Speaker
1 x Micro USB Charging Cable
1 x Instruction Manual
1 x Warranty card
7
PRODUCT OVERVIEW
8
1. Press and hold for 5 seconds to power on/o.
2. Charging port: charge the speaker using a standard micro USB charging cable.
3. AUX-IN: connect the 3.5mm AUX-IN cable (not included) to the AUX-IN port
of the speaker and into your device’s AUX-IN port.
4. USB port: use this slot to play MP3 music files from your USB flash drive.
5. TF card port: use this slot to play MP3 music files from your TF card.
6. When playing music, short press to pause/play.
Under BT mode with mobile paired, short press to answer a call, press again to
hang up, long press to reject a phone call, and double click to redial.
7. Long press volume plus, short press the next song.
8. Long press to reduce the volume, short press to play the previous song.
9. Mode switch: short press to switch TF/USB/AUX/BT mode
10. TWS button:
• Make sure your device is not connected to either speaker. Turn on both
speakers. Double click the TWS button on any speaker, it will work as the
main speaker and search for a second BPB10W to get a twin pairing. There
is an audible sound to indicate they are in a twin pairing.
PRODUCT OVERVIEW (CONT.)
9
PRODUCT OVERVIEW (CONT.)
• Wait 5-20 seconds until the speaker prompts another audible sound,
indicating the speakers now are twin-paired.
• After pairing the speakers together, you can browse and connect to the BT
speakers from your device.
When speaker power on, long press TWS button could power o speaker.
NOTE: The internal battery must be fully charged before using the speaker for the
first time.
To access the connection ports (2-5), lift the plastic cover.
PAIRING OPERATION
1. Press and hold the power button until the LED lights are flashing blue and
there is an audible sound to indicate the speaker is powered on and in BT
pairing mode.
2. Make sure your device’s Bluetooth is activated and go to your device’s BT
setting menu, selected “BPB10W” from the BT Settings Menu to pair your
device.
10
CHARGING INSTRUCTIONS
This product has a built-in non detachable rechargeable battery, and the charging
method is Micro USB charging.
• Use the Micro USB cord (included) to charge the device.
• Connect the USB cord to a power adaptor (not included) or a USB powered
port from a laptop or smartdevice.
• The red light remains on when charging the Bluetooth speaker, and the LED
light turns o after charging.
• Charging time 2-3hours.
11
SPECIFICATIONS
Bluetooth version 5.3
Input DC 5V 1A
Lithium Battery 3.7Vdc 1200mAh
Speaker power 10W
Frequency response 20Hz-20KHz
Dimensions 77 (w) x 77 (d) x 190 (h) mm
Playtime Above 6 hours (50% volume)
Charge Time 3-4 Hours
CUSTOMER HELPLINE:
info@ayonz.com
DISTRIBUTED BY:
Ayonz Pty Ltd
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
