1. FAMILIARIZE YOURSELF WITH OCCLY.
THE OCCLY SYSTEM INCLUDES BOTH A
DEVICE AND APP.
DEVICE
OCCLY Blinc USER GUIDE
MOBILE APP
LED
SIREN ALARM
BUTTON
UTILITY
LIGHT
USB
CHARGING ON/OFF
CAMERA
CAMERAS
LED
LED & LIGHT
SENSOR
MIC
BASIC FUNCTIONS
Before you use your Blinc please charge it fully.
When charging, a faint red light will appear
from inside the units left side window. When
fully charged, and pendant off, this light will
shut off. If your Blinc is on, the red light will
stay on while charging, regardless of charge
level. Allow approximately 2 hours for a full
change.
• To turn on your device, simply press the on/off
button once.
• To turn on/off the utility light press the
power/utility light button on the device or by
selecting the button on the home screen of
the app. To change the brightness of the
utility light, press the power/utility button
again. To turn off press once more.
• To alarm, push the alarm button TWICE
rapidly on the device. Alarm can also be
triggered by tapping the green Occly icon
TWICE rapidly on the app Home or Crime
Map screen.
• To disable the alarm, your 4-digit personal
cancellation code will need to be entered on
the app screen.
• If you have difficulty pairing the Blinc or need
to pair to another phone use the following
procedure:
1. With the Blinc off, hold down the
alarm button and press the powerbutton.
2. While continuing to hold the alarm
button, look for the side lights to flash.
At that time, release the alarm button.
3. Go to your phone’s Bluetooth setting
and pair Blinc to your phone.
4. Once paired, hold down the power
button for approximately 6 seconds to
turn off your Blinc.
5. You may now turn the Blinc back on
for use.
2. MOBILE APP
A. Home Screen
B. Crime Map Screen
Alarm/panic button.
Indicates if the Occly Blinc is paired to a
mobile phone.
Indicates if the GPS is functioning.
Indicates device battery power.
Indicates active mode
(Select button to toggle from Active to HomeWatch™)
Indicates HomeWatch™ mode
(Select button to toggle from HomeWatch™ to Active)
Controls utility light on Blinc.
Toggle between home/map screen
Main menu
Alarm/panic button
Crime index indicator - Changes when you
move from location to location. Numbers
are color coded to the Crime level in any
particular area. Tap Crime Rate number for
more information.
Report suspicious activity. Used to mark
suspicious activity/crime on the map.
Crime type. Type and location is reported
and entered by users.
Location button. Takes you back to your
exact location on the map.
Your location.
43.4
CRIME INDEX
GPS
OCCLY Blinc USER GUIDE
C. Main Menu
D. Device Screen
Home -
Takes you to the home screen.
Crime Map - Takes you to the crime map screen.
Device - Takes you to PAIR DEVICE & REMINDERS page.
Account - Takes you to My Account screen. Here you
can access the full user account page, change password,
request images, modify HomeWatch addresses,
emergency contact List, and log out.
Refer-A-Friend - Discount code to share with friends
Settings - Includes settings for Ambient Lighting,
CrowdHelp notifications, Impact Sensor, Blinc Alerts,
Belt Clip Alerts, HomeWatch sound level, Social Media,
Alarm (on Bluetooth connection drop), Silent Alarm.
About - Information. Terms of Use, User Manual, FAQ,
Contact Occly.
You will find a list of Occly devices that are available to
connect to. Any device bluetooth paired will be
selectable from list.
Un-pair the Blinc from the Occly app (does not un-pair
from your phone)
Turn off your Blinc. Note: Alarms will no longer process
from your Blinc when it is off.
Puts your Blinc online. Make sure you power on your
Blinc before pressing this button.
Customize when you’d like to be reminded to take your
device.
Update Blinc firmware (when available)
PAIR DEVICE
UN-PAIR DEVICE
TURN OFF BLINC
TAKE DEVICE REMINDERS
FIRMWARES
OCCLY Blinc USER GUIDE
E. Settings Menu
AMBIENT LIGHT/FLASHLIGHT - LOW: Ambient,
HIGH: Flashlight
CROWDHELP™ - Notifies user when an alarm is triggered
from a nearby Occly device. ON/OFF setting.
IMPACT SENSOR - Used for triggering automatic alarms.
Senses and measures any sudden impacts. Best for when
using while riding your bike or in vehicle.
BLINC ALERTS - Get alerts about Occly push
notifications. Lights will Flash when push messages are
received.
HOLSTER ALARM – Activate alarm if belt clip unfastens.
HOMEWATCH™ SOUND LEVEL - Used to adjust sound
detection trigger level during HomeWatch™. Eg: “Low”
setting will trigger alarm when softer sounds are
detected. LOW/MEDIUM/HIGH setting.
SOCIAL MEDIA - Allows the user to post to social media
when using Blinc. ON/OFF setting.
ALARM – Alarm will activate if Blinc and Phone lose
Bluetooth connection.
SILENT ALARM - Disables sound and lights during alarms.
OCCLY Blinc USER GUIDE
G. About
User privacy policy information.
View the Blinc user manual
Frequently asked questions.
Access to customer support
TERMS OF USE
QUICK START GUIDE
FAQs
CONTACT OCCLY
F. Account Menu
Links you to customer web portal.
Links you to customer web portal to change password.
Allows user to fetch image files from Blinc and transfer
to the cloud for user retrieval.
Custom list of addresses used to help locate the user
during HomeWatch™ alarms.
List of contacts that are notified during an alarm.
Log out of your account. If you log out you will not
have access to monitoring and your Blinc will be
turned off.
MY ACCOUNT
CHANGE PASSWORD
REQUEST IMAGES
HOMEWATCH™ ADDRESSES
EMERGENCY CONTACT LIST
LOG OUT
OCCLY Blinc USER GUIDE
/