Commands Reference Card
for the Model 3395/3395A
UNIX Operating System-like
Interface
See Using the Model 3395/3395A UNIX Operating
System-like Interface for detailed information about
these commands.
The commands described with an asterisk (*) require
superuser mode. (See the su command.)
Command Description
alias [name [word-
list]] Create and display command
aliases.
arp -a | ip-addr | -d
ip-addr* | -s ip-addr
ethernet-addr*
Display, delete, or create
entries in the Internet-to-
Ethernet translation table.
boot* [-o]
[minutes] | -c | -d Initialize the terminal server.
connect [service[-n
node-name]
[-d dest-name]]
Establish a job with a LAT
service.
connect [rhost [-p
telnet
-
port-number]] Establish a job with a Telnet
destination.
dli [cmd]Open the Model 3395
command interface from the
ULI, and execute a Model 3395
command.
exit Terminate the ULI or disable
superuser mode.
fg [%] | [%]job |
host-name Reopen a job.
help [cmd[cmd]]
?
Display information about
commands and keywords.
history [n] [-r [n]]
[-h [n]] Display a list of ULI events at
your port.
hosts Display a list of available
domain names.
ifconfig -a |
interface [ip-addr]
[netmask net-mask]
[broadcast bip-
addr] *
Display and configure network
parameters.
jobs Display a list of currently
active jobs.
kill [%] | [%]job |
-a Terminate one or more jobs.
lock Temporarily suspend access to
a port.
logout [-p port#]Terminate all jobs and log out
the port. (Only users at
superuser ports can log out
other ports.)
lpc* ? | help |
abort | clean |
create [-p
ports][args] |
delete | disable |
enable | exit |
quit | status
Manage line printers.
lpq -Pprinter
[job
#
...] Display the contents of a
printer queue.
lprm* -Pprinter job#.
. . Remove one or more entries
from the printer queue.
netstat [-n] |
-a[n] | -i[n] |
-I[n] [interface] |
-r[n] | -s[n]
Display network statistics
collected by the
communications server.
ping* [-l] rhost Use ICMP to generate a
response from a host.
ppp + Enable the Point-to-Point
Protocol (PPP).
queues [-a] |
-h host-name |
-s service-name |
-p port-number |
-e entry
Display the service connection
queue.
rlogin rhost
[-l username]Use the Rlogin protocol to
establish a job with a remote
host.
services
-c[service-name] |
-s[service-name] |
-S[service-name]
Display information about
LAT services.
set
[history=n] |
[ignoreeof=cnt] |
[prompt="string"]
Change and display the values
of the ULI variables.
slip +[c] Enable the SLIP or CSLIP
protocol.
source
/pathname/script-
name
Execute a script file.
stty [-a] | option Set and display port parameters
that control terminal
characteristics.
su [password]Gain access to superuser mode.
(Authorized users only)
telnet rhost
[telnet-port-number]Use the Telnet protocol to
establish a job at a Telnet
destination.
tn3270 rhost
[telnet-port-number]Use the Telnet protocol to
provide 3270 access to an IBM
host.
unalias name Delete the alias you specify.
unset history |
ignoreeof | prompt Reset the values of ULI
variables to their default
values.
who [am i]
whoami Display the names and port
numbers of all users on the
terminal server, or the current
user.
xremote [rhost]Establish an Xremote session.
Editing Characters
Key Sequence Function
<CTRL> <A> Insert/Overstrike.
<CTRL> <B>
or up arrow key ↑Recall the previous
command.
<CTRL> <D>
or left-arrow key ←Move the cursor one
position to the left.
<CTRL> <E> Move to the end of the
current command line.
<CTRL> <F>
or right-arrow key →Move the cursor one
position to the right.
<CTRL> <H> Move to the beginning of
the command line.
<CTRL> <N>
or down-arrow key ↓Recall the next command
in the command history.
<CTRL> <R> Redisplay the current
command line.
<CTRL> <U> Delete all characters.
<CTRL> <V> Quote the next character,
so that the ULI interprets
it as a variable.
<CTRL> <X> Delete the command line.
<CTRL> <Z> Cancel an interactive
operation.
<DELETE>
or <backspace> Delete the character to the
left of the cursor.
Copyright © 1994 by SynOptics Communications, Inc.
All rights reserved.
Trademarks
SynOptics Communications and SynOptics are registered
trademarks of SynOptics Communications, Inc.
Other brand and product names are registered trademarks
or trademarks of their respective holders.
Statement of Conditions
In the interest of improving internal design, operational
function, and/or reliability, SynOptics
Communications, Inc. reserves the right to make
changes to the products described in this document
without notice.
SynOptics Communications, Inc. does not assume any
liability that may occur due to the use or application of
the product(s) or circuit layout(s) described herein.
Federal Communications Commission
(FCC) Statement
Note: This equipment has been tested and found to
comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against
harmful interference when the equipment is operated in a
commercial environment. This equipment generates,
uses, and can radiate radio frequency energy. If it is not
installed and used in accordance with the instruction
manual, it may cause harmful interference to radio
communications. Operation of this equipment in a
residential area is likely to cause harmful interference, in
which case users will be required to take whatever
measures may be necessary to correct the interference at
their own expense.
Electromagnetic Emissions
Meets requirements of
FCC Part 15, Subparts A and B, Class A
En 55 022 (CISPR 22:1985), Class A
General License VDE 0871, Class B (AmtsblVfg No.
243/1991 and Vfg 46/1992)
VCCI Class 1 ITE
Commands
Reference Card
for the Model
3395/3395A UNIX
Operating System-like
Interface
SynOptics Communications, Inc.
4401 Great America Parkway
Santa Clara, CA 95052-8185
893-765-A
-
1
-
2
SynOptics 3395 Command Reference
- Type
- Command Reference
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Nortel Networks 3395A User manual
-
Bay Networks 3395A Configuration manual
-
-
-
-
-
-
Cabletron Systems CSMIM-T1 Administrator's Manual
-
-