Page is loading ...
FOR YOUR SAFETY
! Please read through the instruction manual before using the LUX luna
to ensure safe and correct use of the appliance.
! Use the LUX luna exclusively for the removal of dust in household areas.
! Do not use the appliance on damp or wet floors or on any other liquid
material. Do not vacuum any liquids or moist dirt, hot ash or cigarette
ends.
! To protect against risk of electrical shock, always switch off the
appliance prior to any adaptation, cleaning, or maintenance work.
Remove the electrical plug from the socket. Never unplug the appliance
by pulling the electric cord.
! Do not clean your vacuum cleaner or any of the electrical accessories
with water or any liquid agent (risk of an electrical shock!).
! Use LUX original parts exclusively.
! Never run the appliance over the electric cord as it could damage it.
! Never vacuum body parts with the LUX luna or its accessories. Never
leave small children unattended with the appliance ready for operation.
! Operate the LUX luna solely under the mains voltage indicated on the
type-plate, as otherwise the appliance could be damaged.
! Should you discover any damage to the appliance or the electric cord,
please contact your nearest LUX Customer Service immediately for
examination, repair or adjustment.
! This appliance is not intended for use by young children or infirm
persons unless they have been adequately supervised by a responsible
person to ensure that they can use the appliance safely. Young children
should be supervised to ensure that they do not play with the appliance.
Lux electrical appliances correspond to the relevant safety
provisions. Repairs to electrical appliances may only be done by
qualified personnel. Inexpert repairs or improper use can lead to
significant hazards for the user.
Environmentally-oriented production: In the production of our products, we
attach importance to the protection of the environment. We use environmentally
friendly plastics and colors. We intentionally avoid flame-retardant agents harmful
to the environment. We use non-solvents adhesives, unbleached paper or safe
plastic for our filter bags.
Recyclable materials: The materials used in our products are almost completely
recyclable. We refrain extensively from the use of PVC. In the construction of our
products, we are concerned about “pure grade” materials: The materials used
can later be separated with low energy consumption. To make recycling even
easier, we have marked most of our plastic parts.
ASSEMBLING THE LUX luna
Connecting The Hose
Attach the hose to the socket of the LUX luna until it
can be heard to click into place. To detach the hose,
press the two release buttons and lift it off.
Connecting The Extension Tube
Insert the extension tube into the handle of the hose.
Connecting The Combination Nozzle
Insert the extension tube into the joint of the
combination nozzle. Both devices are now ready for
operation.
Using The Combination Nozzle
The combination nozzle allows cleaning all surfaces
from hard floors to carpets, rugs and mats. Set the
carpet position on the nozzle to make vacuuming
carpets easier. Likewise, use the hard floor position
for smooth operation when vacuuming hard floors.
Connecting To The Mains
Extend the power cord and connect the electrical
plug to the mains. To rewind the cord, slightly pull it
back (2.5 cm) and release it. The cord will rewind
automatically.
Switching On And Off
Start and stop the LUX luna by pressing the on/off
switch lightly with your toe.
For Your Safety:
! To protect against risk of electrical shock,
always switch off the appliance prior to any
adaptation, cleaning, or maintenance work.
Remove the electrical plug from the socket.
Never unplug the appliance by pulling the
electric cord.
Carrying & Storing
Use the hand grip on top of the appliance to carry
the LUX luna at home. Alternatively, carry the
appliance using the recessed grip located at the
bottom front of the appliance.
Always store your LUX luna in a dry space at room
temperature with the power switched off, the
electrical plug disconnected and the power cord
rewound.
APPLICATIONS
Connecting Accessories
Insert the desired accessory into the handle.
Textile Nozzle
You can free textile fabrics as well as upholstery,
curtains and mattresses from hairs, threads and fuzz
using the textile nozzle.
If needed, connect the extension tube between the
handle and the desired nozzle to enhance your reach.
Crevice Nozzle
The crevice nozzle thoroughly vacuums dust from
seams and gaps, in upholstery and mattresses and
between furniture items.
Blowing Adapter And Spray Bottle
The spray bottle can be attached to your LUX
luna in order to disperse water. Connect the spray
bottle to the handle. Mount the hose on the outlet
vent of the vacuum cleaner by means of the
adaptor attached. The spray bottle is dispensed by
closing the two pinholes on top of the main body.
Close the holes by applying finger pressure on it.
The amount and size distribution of the spray
droplets can be adjusted by turning the ring in
front of the nozzle.
For Your Safety:
! Do not use the spray bottle with
corrosive or combustible liquids.
! Do not use the spray bottle while
vacuuming. Only use the spray bottle in
combination with the blowing adaptor
attached to the outlet of the appliance.
! Always hold the spray bottle upright.
CHANGING THE FILTERS
General Note
If you do not change the filters, in particular the filter bag, the LUX luna will no
longer have its full suction power performance.
Filter Bag
In order to change one of the various filters, pull the
yellow release handle and open the appliance hood.
Take out the full filter bag. Afterwards insert a new
filter bag making sure that the holding plate fits into
the respective recesses of the appliance. Close the
appliances hood until it can be heard to click into
place.
Please Note
If no filter bag is inserted, the appliance hood cannot
be closed. Always use Lux original filter bags to
ensure optimum performance of your appliance.
Motor Protection Filter
The motor protection filter is made of fleece. It
protects the motor in case the filter bag is leaking
and further filters the air from small particles.
In order to change the motor protection filter, take
out the filter bag first. Press the upper flap of the
holding grid. Pull the grid out and remove the filter
pad. Insert a new filter pad into the grid with the
printing facing outwards. Push the grid back into its
original position and hook in the upper flap. Re-
insert the filter bag. When you have closed the hood,
the appliance is ready for operation.
After inserting, the motor protection filter has an
effective life span of one year, depending on usage.
Motor Outlet Filter
The motor outlet filter further collects smallest dust
particles and filters the exhaust air.
In order to change the motor outlet filter, open the
appliance hood and press the flap located at the
side of the green cover grid. Insert a new motor
outlet filter, and cover it by pressing the green cover
grid into position. Then close the hood. The
appliance is now ready for operation.
After inserting, the motor outlet filter has an effective
life span of one year, depending on usage.
Do not wash the motor protection filter and the motor outlet filter. They may be
dusted off. If blocked, replace the entire set. The motor outlet filter and the motor
protection filter can be disposed with your household waste.
Dovina Fragrance Chip
Press the Dovina fragrance chip on the plastic plate
of the cover grid of the motor outlet filter.
Using an electrical suction hose (optional extra)
In addition to the standard hose, it is also possible to
connect an electrical suction hose to the appliance.
This electrical hose gives you the opportunity to
connect electrical appliances to your vacuum cleaner.
Connecting the electrical suction tube:
Push the electrical suction tube on to the connection
section of the hand grip till the tube locks into position.
Note:
To remove the electrical suction tube, push the
unlocking button located at the end of the electrical
suction hose and pull the connected sections apart.
Switching ON and OFF:
After your LUX luna has been connected to the
power supply, by pressing the on/off switch lightly, the
green operating mode light (Power) illuminates on the
appliance.
You can change the power levels of your LUX luna
by using the slide switch on the electrical suction hose.
This slide switch provides a secure selection of one of
the four suction power levels. Select the appropriate
power level between ‘A’ and ‘3’.
Performance Level Type Of Floor
A Automatic rugs
carpets
1 rugs
carpets
fitted carpets
2 heavy soiled fitted carpets
3 hard floors
above-floor areas
special carpets (needled felt, looped carpets)
Should it be difficult to move the nozzle over your carpets, you have perhaps
selected a power level that is too high. Please, reduce the power on the Lux
Luna to the level ‘1’.
Canister-type vacuum cleaner LUX luna
Technical data
Motor: Maintenance-free universal motor, ball-bearing, electronic performance
control, safeguarded with safety switch
Ventilator: Single-stage radial ventilator
Housing: High-grade, recyclable plastic
Electrical connection: For 230 Volt alternating current,
nominal performance 900 Watts
Action radius > 10 m in accordance with DIN IEC 60 312,
automatic rewinding of cable
Suction values (Medium values):
For complete appliance with suction hose and suction tube:
max. negative pressure 160 hPa, max. flow rate 27 l/s, max. suction performance
130 Watts
Filter bag volumes: 4.5 l in accordance with DIN IEC 60 312
Dust emission: Ca. 0.1 mg/m³ in accordance with DIN IEC 60 312
Noise emission: 75 dBA basic appliance with floor nozzle and telescopic tube
(without intake air noise) (workplace-related, measured under free-field
conditions on carpet)
Weight: 6.0 kg
PO Box 2777
Rowville VIC 3178
1300 659 481
/
