Octagon SX888 IP HEVC H.265 HD IPTV Set-Top Box Owner's manual

Repair Manual OCTAGON SX88 & SX88+ with USB Stick

1. Connect Receiver with HDMI cable to Television.

2. Press and keep RESET Button on bottom panel.

3. Connect Power cable (Turn on box).

4. On the front panel you will see "UPG" .. after few seconds STB will show USB

Update Menu.

See Photos:

5. Prepare USB Stick FAT32 formatted and copy Firmware to USB Stick.

Example: OCTAGON_SX88_FW_v1.04.56_20180409.mupg

6. Connect USB Stick with Receiver.

7. Remote Control: Press Red Button and select Firmware file.

8. Start with OK button and wait installing.

Good Luck, Repair should be done !

OCTAGON SX88 & SX88+ Download:

https://www.octagon-germany.eu/downloads/digital-receiver/hdtv-receiver/

OCTAGON GERMANY Support

https://www.octagon-germany.eu

http://octagon-forum.eu

This manual is also suitable for

Download PDF