Minebea Intec YCC02-R12M6 | Option: M5 | M25 | M35 Owner's manual

Type
Owner's manual
Installation Instructions | Installationsanleitung
Minebea Intec YCC02-R12M6 |Option:
M5|M25|M35
Connecting Cable with 12-pin Round Male Connector and Cable Gland for Connecting a
Minebea Intec Weighing Instrument to a CombicsCIS2..|CIS3..|CAIS.. Indicator and
CW2S..|CW3S..| CAW.. complete scales
Anschlusskabel mit 12-pol. Rundstecker und Kabelverschraubung zum Anschluss einer
Minebea Intec -Waage an Combics-AuswertegeräteCIS2..|CIS3..|CAIS..
Indicator und CW2S..|CW3S..|CAW.. Komplettwaagen
Open cable ends Cable gland 12-pin round male
with ID labels connector
Offene Kabelenden Kabelverschraubung 12-pol. Rundstecker
mit Kennzeichnung
Cable length: 6 m / Kabellänge: 6 m
Stranded wires that are not connected are cut to 20 mm and the end of the cables are iso-
lated with shrink-down tubing.
Nicht angeschlossene Litzen auf 20 mm abgeschnitten und mit Schrumpfschlauch isoliert.
98647-003-22
98647-003-22
Indicator CIS2..|CIS3..|CW2S..|3S.. Terminal strip
Auswertegerät:CIS2..|CIS3..|CW2S..|3S.. Klemmleiste Pin Label
Option M5
FB,FC, COM 1 6 CTS
QC,QCT LV1 9 DTR
7 TXD
8 RXD
10 GND
Option M25
FB,FC, COM 2 8 CTS
QC,QCT LV2 5 DTR
10 TXD
9 RXD
3 GND
Option M35
FB,FC, UniCOM 8 CTS
QC,QCT LV2 5 DTR
10 TXD
9 RXD
3 GND
Indicator CAIS...|CAW...|CAH..
Auswertegerät:CAIS...|CAW...|CAH..
Option M5
QC,QCT COM 1 11 CTS
QC,QCT 14 TXD
13 RXD
15 GND
Option M25
FB;FC COM 2 31 CTS
QC,QCT 34 TXD
33 RXD
35 GND
More information in the relevant operating instructions.
Weitere Informationen in der entsprechenden Betriebsanleitung.
Minebea Intec Bovenden GmbH & Co. KG
Leinetal 2, 37120 Bovenden, Germany
Phone: 49.551.309.83.0, Fax: 49.551.309.83.190
www.minebea-intec.com
Specifications subject to change without notice. RS · KT
Publication No.: WYC6023-a17024
  • Page 1 1
  • Page 2 2

Minebea Intec YCC02-R12M6 | Option: M5 | M25 | M35 Owner's manual

Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI