Page 2 / 2 LY840-T
USE & CARE
SAFE USE: Place the table on a at, level surface. Never sit or climb on the table.
INSPECT: Periodically check assembly points and tighten ttings as necessary.
CLEANING: Identify the direction of the woodgrain. Following the direction of the woodgrain, wipe surfaces
with a soft cloth.
MAINTENANCE: This furniture was treated with teak oil at the factory. Apply a suitable wood oil at least once
a year, or when the wood looks particularly dry. Follow application instructions as noted with the suitable wood
oil (not included).
STORAGE: Protect this item from ice and snow. Store indoors, in a dry location. Covering the unit while in
storage will help prevent dust buildup.
ASSEMBLY
1. Align 2x Table Panel (A) with 1x Side Panel (B).
2. Hand-tighten 4x Bolt (C) to loosely secure the table panels to the side panel.
3. Repeat step 1 and step 2 to ax the second side panel.
4. Lay 1x Table Panel (A) face-down on a clean, soft surface.
5. Tighten all bolts using Hex Key (F).
NOTE: Do not fully tighten any bolt until all bolts have been placed.
WARNING:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage
07/2020
A
C
B
D