2. usa-spec
  3. PA15-NIS

usa-spec PA15-NIS User manual

  • Hello! I've reviewed the user manual for the USASPEC PA15-NIS and PA15-INFI interfaces. This document provides instructions on how to set up and use these interfaces with your car's radio, focusing on modes like Folder, Direct, and Playlist. It also covers connecting and using iPods and switching between various audio inputs. I'm ready to answer any questions you may have.
  • What is the purpose of the Preset Set Up Procedure?
    What should I do if my radio does not have a SAT or RADIO button?
    What does Model PA15-INFI do?
print date: 1.20.2010
[email protected]
SAT ready radios must go through the Preset Set Up Procedure in
Section 3-1-2 in order for the Folder Mode to work properly.
SECTION 1. ABOUT PA15-NIS INTERFACE
1-1 Introduction
1-2 Text Display of Song Information
1-3 Package Content
1-4 Compatibility
1-5 Applications
verified the published radio and vehicle application to the best of
our ability. Due to uncontorllable factors, can not 100% guarantee
every pubilshed applications. These factors include variables such as, anom
-alies within a factory radio, factory radio heretofore unknown to
and partial model year changes.
SECTION 2. Playlist Mode, Direct Mode, Folder
Mode and AUX Option
2-1 Direct Mode
2-2 Folder Mode
2-3 Playlist Mode
SECTION 3. Mode Setting and Function Control
2-4 AUX Input Option
3-1 Folder Mode + Direct Mode Configuration
3-1-2 Folder Mode Set Up on the Radio
3-1-3 Functions and Radio Buttons
Step 8. iPod music will play through the radio.
Step 9. If radio has a Preset A-B-C button, select “A” preset group by pushing the “preset
A-B-C” button.
If radio has SAT1 and SAT2 buttons then push the SAT1 button.
Step 8. When radio displays CH 1, push-n-hold the preset button #1 for about 3 seconds or
unitl a beep is heard.
Step 9. Push the Track Up button to CH2. (Note: find out which button on your radio is for
Track Up from Section 1-5 Application table and Section 3-1-3 table).
Step10. When radio displays CH2, push-n-hold the preset button #2 for about 3 seconds or
until a beep is heard.
Step 11. Repeat Step 9 and Step 10 to finish the set up of CH3 to CH6 and Preset #3 to
preset #6.
3-1-5 Switching Between SAT receiver and iPod
3-2 Playlist Mode + Direct Mode Configuration
3-1-3 Connecting and Playing iPod
3-2-1 Set DIP switches as follow:
3-2-2 Radio Buttons and Functions
3-2-3 Connecting and Playing iPod
3-2-4 Switching Between iPod and Slave-CD changer
SECTION 4. CABLE CONNECTION
SECTION 5. Playlist Naming
/