REV 0 - 2106111500
L-C2-544
1
INSTALLER: Leave these instructions with consumer.
CONSUMER: Retain for future reference.
ROBERT H. PETERSON CO. • 14724 East Proctor Avenue • City of Industry, CA 91746
Fig. 1-1 Remove grill components
Air Bae Replacement
This air bae is for installation on Echelon Diamond*,
Aurora, Combo, and Choice Series grills only.
Note: * Echelon Diamond 1060 models and Echelon Diamond
stand alone grills with smoker drawers are NOT
compatible with this air bae.
To install, follow the steps below:
1. Ensure the grill is completely cool and the gas is
completely shut o.
2. Remove the middle cooking grid, middle avor grid, the
zone dividers, and middle burner. See Fig. 1-1.
3. Remove the existing air bae and discard. See Fig. 1-2.
4. Install the new air bae by inserting the two front tabs into
the slots on the grill. See Fig. 1-3.
5. Replace all of the components removed for this procedure.
Model # 24194-40
24194-41
Existing air
bae
(Remove grill components)
Fig. 1-2 Remove existing air bae
Remove and
discard
Fig. 1-3 Install new air bae
Install new
air bae
Insert tabs
into slots
(Front view)
(Design may vary)