Moen 6150BN Specification

Category
Faucets
Type
Specification

This manual is also suitable for

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
DESCRIPTION
Metal construction with chrome finish
1/2" IPS connections will accept standard ball nose connection for 3/8" tubing
Includes pop-up type waste assembly
OPERATION
Lever style handles
Hot side counterclockwise to open (clockwise to close)
Cold side clockwise to open (counter-clockwise to close)
Swing spout
FLOW
Water usage is limited to these maximum flow rates as indicated by the corresponding
product markings
° 1.2 gpm max (4.5L/min) at 60 psi
CARTRIDGE
1234 cartridge design
Nonmetallic and stainless steel material
STANDARDS
Third party certified to WaterSenseASME A112.18.1/CSA B125.1, and all applicable
requirements referenced therein
Certified to NSF 61/9 & 372
Products marked with 1.2 gpm are compliant with California water efficiency regulations
Complies with California Proposition 65 and with the Federal Safe Drinking Water Act
ADA for lever handles
WARRANTY
Lifetime limited warranty against leaks, drips and finish defects to the original
consumer purchaser
5 year warranty if used in commercial installations
NOTE
*Service kits available for thicker or thinner deck applications. See Parts view.
Gibson™
Two-Handle Lavatory Faucet
Model: 6150
NOTE: THIS FAUCET IS DESIGNED TO BE
IN STALLED THRU 3 HOLES, 1" MIN. DIA.
2" ON CENTER
2-1/2"
(64mm)
Min. to backsplash for
liftrod operation
4"
(102mm)
4-3/16"
(107mm)
4"
(102mm)
5-23/32"
(145mm)
7-15/16"
(202mm)
2-5/8"
(67mm)
5/16" (8mm) MIN. Deck Thickness*
1-3/16" (30mm) MAX. Deck Thickness*
6-1/2"
(165mm)
MOUNTING
NUT/WASHER
HOT
1/2" NPT
COLD
1/2" NPT
LIFT ROD
6/16
  • Page 1 1

Moen 6150BN Specification

Category
Faucets
Type
Specification
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI