Philips CCB193AT Owner's manual

Owner's Manual

Im )ortant!

Return your

within

Once your PHILIPS purchase is registered, you're eligible to receive all the privileges of owning a

PHILIPS product. So complete and return the Warranty Registration Card enclosed with your pur-

chase at once.And take advantage of these important benefits.

Warranty Owner

Verification Confirmation

Registeringyour productwithin

10daysconfirmsyourright to max-

imumprotectionunderthe

terms andconditionsof your

PHILIPSwarranty.

Your completedWarranty

RegistrationCard servesas

verification of ownership !n the

eventof product theft or loss.

Model

Registration

ReturningyourWarranty

RegistrationCard right awayguaran-

teesyou'llreceiveallthe information

andspecialofferswhich youqualify

for asthe owner of your model.

PHILIPS

Congratulations on your purchase, and

welcome to the "family!"

Dear F_FllLIPS product owner:

Thank you for your confidence in PHILIPS.You've selected one of

the best-built,best-backed products availabletoday.And we'll do

everythingin our power to keep you happywith your purchasefor

many years to come.

As a member of the PHILIPS"family" you're entitled to protection

by one of the most comprehensivewarranties and outstandingser-

vice networks in the industry.

What's more, your purchaseguarantees you'll receive all the infor-

mation and special offers for which you qualify, pluseasy accessto

accessories from our convenient home shopping network.

And most importantly you can count on our uncompromising

commitment to your total satisfaction.

All of this is our way of sayingwelcome-and thanks for investing in

a PHILIPS product.

Sincerely,

Robert Minkhorst

President and Chief Executive Officer

RS.

Remember, to get the most from your PHILIPS prod-

uct, you must return your Warranty Registration

Card within 10 days, So please mail

it to us right nowl

Know these

safetysymbols

kqBID_, _FER E_ TOOLI_JF',_D_re_ p_W_Am4_.

A This "bolt of lightning"indi-

cates uninsulated material

within your unit may cause an

electrical shock. For the safety

_f everyone in your household,

_leasedo not remove product

covering.

A The "exclamation point"

calls attention to features

for which )_oushould read the

enclosed hterature closely to

prevent operating and mainte-

nance problems.

WARNING: TO PREVENT

FIRE OR SHOCK HAZARD,

DO NOT EXPOSE THIS

EQUIPMENT TO RAIN OR

MOISTURE.

CAUTION: To prevent elec-

tric shock, match wide blade of

plug to wide slot,fully insert.

ATTENTION: Pour _viter les

choc _lectriques, introduire la

lame la plus large de la fiche

dans la borne correspondante

de la prise et pousser usquau

fond.

For Customer Use

Enterbelowthe SerialNo.

whichislocated on the rear of

the cabinet.Retainthis infor-

mation for future reference.

Model No.

Serial No.

Introduction3

• moo • .QQI ..• • .Q • .Q • .Q • • • • t,I • .Q • .° • • .O • °oo .°, •., • • 1•• • • .•• •oft • .• • .O • 1•• • .•• • ._ • o6• • .•• • .tQ • IQO • .•• • • *OI ••°t°° •

Welcome to yourTV/VCR owner's manual.

This manualhas sevensections: Setting Up YourTV/VCR; Description of Controls; BasicOperations;

Recording Options; PlayingOptions;Additional Features;and Information You May Need.The instructions

explain all of the TV/VCR's features,which are listed below.

Features

A-B Repeat Play

Automatic Channel Setup

Automatic Head Cleaner

Automatic Operation Features

Automatic TrackingAdjustment

Blue Background

Closed Caption

Daylight-SavingsTime

High Quality (HQ) System

19 micron head,improves the picture quality

during playbackof SLPtapes

• On-screen displaysin Englishor Spanish

• On-screen Menu Programming,accessiblewith

remote control or front panel buttons

One-Touch Recording

Real-Time Counter

Remote Control

Repeat Play

S-VHS Quasi Play Back (SQPB)

ShowGuard TM - IndefiniteTimer Recording memory

Sleep Timer

SmartCIock TM

SmartLock TM

Special Effects Playback: Forward and Reverse

Searching; Still; Slow

Timer Recording

Wake Up Timer

Safety Precautions

Warning:To prevent fire or shock hazard,do not expose this

equipment to rain or moisture.

FederalCommunications Commission (FCC)Warning:Any unau-

thorized changes or modifications to this equipment void the

user'sauthority to operate it.

This TV/VCR, equipped with a High Quality (HQ) system, is com-

patible with existingVideo Home System (VHS) equipment.

Philips Consumer Electronics recommends that you use only

video cassette tapes that are labeled with the _ mark. The

use of other tapes may result in poor picture quality and excessive

deposits on the video heads,which may not be covered by the

warranty if damageoccurs.

Note to the Cable'lV System Installer: This reminder is pro-

vided to call the CableTV system installersattention to Article

820-40 of the National Electrical Code, which provides guidelines

for proper grounding - in particular, specifyingthat the cable

ground shall be connected to the grounding system of the building,

as close to the point of cable entry aspossible.

Declaration of Conformity

Model Number: CCBI93AT

Trade Name: Philips

ResponsibleParty: PhilipsConsumer Electronics

P.O.Box 14810

Knoxville,TN 37914-1810

(865) 521-4316

_As an ENERGYSTAR®Partner, Philips Consumer

Electronics has determined that this product meets the

---- ENERGYSTAR®guidelines for energy efficiency. ENERGY

STAR®is a U.S. registered mark.

Using products with the ENERGYSTAR®label can save energy. Saving

energy reduces air pollution and lowers utility bills.

SmartCIock TM, SmartLock", and ShowGuard TM are trademarks of

Philips Consumer Electronics.

Before doing anything else,record

the TV/VCR's model and serial num-

bers in the spaces provided on page

two.These numbers will help us

assist you if you ever call for help.

Your new product, its packaging, and

this manual contain materials that

can be recycled and reused.

Specialized companies can recycle

your product to increase the

amount of reusable materials and

to minimize the amount that needs

to be properly disposed.

Your product uses batteries that

should not be thrown away when

depleted but should be disposed of

as small chemical waste.

Please find out about the local regu-

lations on disposal of your old prod-

uct, batteries, manual, and packag-

ing whenever you replace existing

equipment.

4 TableofContents

Setting Up Your TV/VCR

Introduction .......................................................... 3

Table of Contents ...................................................... 4

Before Using the TV/VCR ................................................ 5

Hooking Up the TV/VCR ............................................... 6-7

Turning On the TV/VCR ................................................. 8

Language Selection ..................................................... 9

Automatic Channel Setup ............................................ I0- I I

Setting the Clock ................................................... 12-17

Daylight-Savings Time .................................................. 18

Time Zone .......................................................... 19

Description of Controls

Front Panel .......................................................... 20

Rear Panel ........................................................... 21

Remote Control Buttons ............................................. 22-23

Adjusting the Picture Controls ......................................... 24-25

On-Screen Status Displays ............................................... 26

I_eminder ........................................................... 27

Basic Operations

Playing .............................................................. 28

Recording ........................................................... 29

Recording Options

One-Touch Recording .................................................. 30

Rerecording (Tape Duplication) ........................................... 31

Timer Recording ................................................... 32-35

Defeat Recording ..................................................... 36

Playing Options

Repeat Play .......................................................... 37

A-B Repeat Play .................................................... 38-39

Real-Time Counter Memory ............................................. 40

Playback Options ..................................................... 41

Additional Features

SmartLock ........................................................ 42-45

Blue Background ...................................................... 46

SleepTimer .......................................................... 47

Wake Up Timer ....................................................... 48

Volume Bar .......................................................... 49

Closed Caption .................................................... 50-5 I

Automatic Operation Features ........................................... 52

InformationYou May Need

Specifications ......................................................... 53

Helpful Hints ...................................................... 54-55

Glossary ............................................................ 56

Limited Warranty ..................................................... 57

Index ............................................................... 58

Accessories .......................................................... 60

BeforeUsingtheTV/VCR5

Putting Batteries in the Remote Control

I

Remove the battery compartment lid on the bottom of

the remote control by sliding it in the direction of the

arrow.

2

Place two AA batteries inside the battery compartment

with their + and - ends aligned as indicated.

3 %3

Replace the battery compartment lid.

Recording Prevention

Video cassette tapes haverecord tabs to ensure that recordings

are'not accidentally erased.

I

To prevent accidental recording, break off the tab with a

screwdriver.

I

2

To record again, cover the hole with cellophane tape. _ • 2

Using the Remote Control

• Point the remote control at theTVNCR's remote sensor.

• Do not put objects between the remote control and the

TVNCR.

TV/VCR Maintenance

• In this TVNCR, useonly tapes with the _ mark.

• Make sure any light adhesive stick-on notes are removed from

the video cassette tape before putting the tape in the TVNCR.

Removable labels like these canjam the TVNCR.

• Periodic maintenance is required to maintain yourTVNCR's

excellent performance.This TV/VCR hasan automatic head

cleaning system.However, the video headswill eventually require

cleaning or replacement. Only an authorized service center

should perform this service.

• The remote control and its batteries

are supplied.

• Do not mix alkaline and man-

i, ganese batteries.

Do not mix old and new batteries.

6 H00kingUptheTV/VCR

I

Hook up yourTV/VCR using one of the connections shown.

A Connect a Cablesignal

I or an antenna to the

Hooking Up Your'rV/VC R ANT(enna) Jack.

With a Cable Signal or

Outdoor Antenna

Be

Hooking Up Your TV/VCR

With a Cable Box

To view anychannel,set the TV/VCR

totheCabLeBox outputchannel

(channel03 or 04).Then, select chan-

nels at the Cable Box.

Connect the Cable signalto j

the IN Jackon the Cable Box. |

Connect an RFcoaxial cable (75- _

ohm,not supplied) to the OUT Jack •

on the Cable Box and to the

ANT(enna) Jackon theTV/VCR.

I F_Fcoaxial cabL_(not supplied)

CQ

Hooking tJp Your TV/VCR

With an Indoor Antenna

To installa rod antenna(not sup-

plied),pushthe stem of the antenna

intothe antennahole on the top of

the "I'VNCI_ Connect the antenna

wire to the ANT(enna) Jackon the

backof the TV/VCR asshown.

Extendthe antennaand adjustits

length, direction,andanglefor the

clearestpicture.

I Rod Antenna

(not supplied)

DO

Hooking UpYour

TV/VCR to Another

Video Source

(VCR or Camcorder)

You may need this connection

if you want to copy tapes.

Detailsare on page3 h

AUDIO/VIDEO OUT

Jackson VCR

Use an Audio cable to connect the AUDIO

OUT Jack on the VCR to the AUDIO In Jack

on the front of the TV/VCR.

AUDIONIDEO In

Jacks on front of

TV/VCR

Use aVideo cableto connect theVIDEO OUT Jackon the

VCR to theVIDEO In Jackon the front of the TV/VCR.

2

Plug in the TV/VCR's power cord.

3

Before you turn on theTV/VCR, go to page eight.

Helpful Hints

Before connecting an antenna or cable signal to the ANT(enna) Jack, make sure the pin is not bent. If the pin is

bent, straighten it as illustrated, then connect the antenna or cable signal to the ANT(enna) Jack.

• Audio and video cables are not supplied.

Crooked Pin

Bent pin

Straight Pin

8 TurningOntheTV/VCR

°.. °o. o, oo, °°oo oo o °o °° °°° °, ° ,°o °, ° o ° ° °o• _*o o** o_* *w 0. _ io* .otoeoe *ll _o o*m.** _t_ee* *.lJ_* .t* *0 • to • * • •

Before you turn on the'rV/VCR, make sure batteries are in the

remote control and the TV/VCR is hooked up correctly.

The instructions on this page work only when you turn on the

TV/VCR for the first time.

I

Press the POWER button. The TV/VCR will come on and the

screen shown below will appear.

> ENGLISH ON

ESPANOL

SELECT &V OR

ESS MENU TO CONTINU

2

Press the PLAY/A button or the STOP/v button to select

F-_glishor Spanish on-screen displays and menus.

3

Press the MENU button. The screen shown below will appear.

TO TVCR

THEN PRESS!1_

END PRESSEXIT

4

Press the F.FWD/_ button to begin automatic channel

setup, The TV/VCR will memorize allavailablechannels.When

channels are set,CHANNELS ARE SETwill appear on the screen

briefly.Then the TV/VCR will go to the lowest channel pro-

grammed.

(If you try to set up channelswhen there isno antennaor cable

connected to the TV/VCR, programming will appear to take place,

but eventually a NO TV SIGNALS ,..messagewill appear on the

screen.Connect an antenna or cable to the ANT(enna) jack on the

TV/VCR, then pressthe EFWD/I_ button again.Youmay need to

follow the steps on page 10instead.)

5

Use the CH(annel) _/_ button or the Number buttons

on the remote control to select aTV/VCR channel. Use

the VOL(ume) _/_ button to adjust the sound.

Helpful Hints

If you do not see any on-screen dis-

plays when you turn on the TVIVCR,

check your hookups, then try again.

If you still do not see any on-screen

displays, follow the steps on pages

nine-10 to select a language and

set up channels.

Toskip step 2, press the MENU

button. All on-screen displays will be

in English.To skip step 4, press the

STATUS/EXITbutton. Channels will

not be set up, and CHANNELS NOT

SET will appear on the screen

briefly.

You cannot set up channels if you

are using a Cable Box.

Line Input mode will always be

stored in the TV/VCR's memory as

channel 00.When you select chan-

nel 00,A/V IN will appear on the

screen briefly. Press the CH(annel)

_/'_7 button or the Number but-

tons to select another channel.

LanguageSelection9

QI..Qe..OgOO...OI'Q00QO..eQ..,..6..Qg*O0.,O..6 ° ...6., ° 66 °°° .6,06. • 6..6.,I ° 6Q.66.. °°° , ° tO..66.6*W..666*J066,, . 66

Follow the steps below to change the language of the on-screen

displaysand menus.

I

Press the MENU button.

l:;_RtMS_TUP FR_Ssb-

L-I) i

BRIGHTNESS

2

i SET CLOCK

SELECT &V CHOOSE li"

TO END PRESS EXIT

Press the PLAY/A button or the STOP/Y button to select

PRIM. SETUP. Then, press the F.FWD/I_ button.

PRIMARY SETUP _]

• SELECT LANGUAGE

AUTO PROG_E_IMING

CH ME _ REVIEW

VoLuEHi_R [ON]

J

3

Press the PLAY/A button or the STOPIV button to

choose SELECT LANGUAGE. Then, press the F.FWD/I_

button.

J

f" ELECT LANGUAGE 1

• ENGLISH ON

ESPAF_OL

SELECT _,V

TO END PRESS EXIT

4

Press the PLAY/A button or the STOPIV button to select

ENGLISH or ESPAI_IOL (Spanish).

5

Press the STATUS/EXIT button.

Flel_aful Hint

If you accidentally select Spanish

and need English on-screen displays

and menus_

I) Pressthe MENU button.

2) Pressthe PLAY/A button or the

STOP/v button to select PREPARA-

CION, then press the EF'WDII_ but-

ton,

3) Pressthe PLAY/A button or the

STOP/v button to choose SELEC-

CION IDIOMA, then press the

F.FWD/I_" button.

4) Pressthe PLAY/_ button or the

STOP/v button to select ENGLISH.

5) Pressthe STATUS/EXIT button.

Although the TV/VCR may automatically memorize the channels

you receive when you turn it on for the first time, you may set up

channels again by following the steps below.

I

Press the MENU button.

VCR PROGRAM

CAPTION

REMINDER

RIGHTNESS

2

Press the PLAY/. button or the STOP/V button to select

PRIM. SETUP, then press the F.FWD,_ button.

SELECT LANGUAGE

AUTO PROGRAMMING

CH MEMORY REVIEW

VOLUME BAR [ON 1

SET CLOCK

SELECT &v CHOOSE I_

O END PRESS EXIT

3

Press the PLAY/A button or the STOPIV button to select

AUTO PROGRAMMING, then press the F,FWD/II_ but-

ton. AUTO CH PROGRAMMING ...will appear on the screen.

The TV/VCR distinguishes between TV channels and cable channels

automatically, and the TV/VCR will memorize itsavailablechannels.

,QOC) ,

C3 C3 CD_

CD CDE3

OCD

O O L

Wait for theTV/VCR to set up

channels.

4

Wait for a few minutes, When setup is complete, CHANNELS

ARE SET will appear on the screen.Then the programming of the

lowest channel number placed in the TV/VCR's memory will

appear on the screen. Now, when you press the CH(annel) _/_

button, you will scan only through channels you receive.

Helpful Hints

• Line Input mode will always be

stored in the TV/VCR'smemory as

channel 00.You cannot delete it.

• You can not select AUTO PRO-

GRAMMING at step 3 if you are in

Line Input mode.

AutomaticChannelSetup(cont'd)II

a.61,=.6oloo=oooto • .6ot4 • ol,oloto • =*eoo.o6eq_o6g_oQ,toooeot,ligoooe. • ooe_o • • • o_ool..o*_o,eeQ_ •. ,_** Jt_oelo •

Adding/Deleting Channels

Pr!ss the MENU button. 2,4

_HXNNEL i SAy

I SPIARTI.OCK

! P,EVIEW

I EXIT

i PRIM SETUP

2

Press the PLAY/_ button or the STOP/v button to select

CHANNEL.

CHI23T_>cT_cADJUSTHANNELPRESS_11I_

I I SMARTLOCK I /

', REV1EW

EXIT

L__PP'IM SETUP _/]

3

Press the CH(annel) _/_7 button to select the channel

you want to add or delete.

5

3

CR PROGRAM

4

Press the F.FWD/I_ button or the REW(ind)/11 button to

select SAVED (to add that channel) or DELETED (to

delete that channel).

Repeat steps3-4 to add or delete other channels.

5

Press the STATUS/EXIT button.

Programming of the channel you added or deleted will appear.

Helpful Hint

Toreview the channels memorized

by the TV/VCR,follow these steps.

I) Pressthe MENU button.

2) Pressthe PLAY/.&.button or the

STOP/V button to select PRIM.

SETUP.Pressthe I_FWD/I_ button.

3) Pressthe PLAY/A button or the

STOP/Y button to select CH MEM-

ORYREVIEW.Pressthe F.FWD/I_

button.A list of programmed chan-

nels will appear on the screen.

4) If all the programmed channels

don't fit on the screen, press the

EFWD/I_ button. If you do not

press the EFWD_I_ button within

10 seconds,the remaining channels

will appear on the screen. (If there

are no remaining channels, the pre-

vious menu will appear.) Or press

the REW(ind)/_l button to see the

previous screen of channels.

5) Pressthe STATUS/EXIT button

once or twice.

12SettingtheClock

There are three ways to set the clock: Manually,with Automatic

PBSChannel Selection, or with Manual PBSChannel Selection.

With manual clock setting,you tell the TV/VCR the current time.

With Automatic or Manual PBSChannel Selection, the TV/VCR

g_etsthe time from your local PBSstation.

If you useeither ManualPBSChannel Selection or Automatic PBS

,Channel Selection,follow the stepson page 19 to havethe

TV/VCR maintain the clock according to yourTime Zone.

Cable Box users must set the clock manually.

To set the clock manually,follow the stepson pages 12-13.To set

the clock usingAutomatic PBSChannel Selection,follow the steps

on pages 14-15.To set the clock using ManualPBSChannel

Selection,follow the stepson pages 16-17.

Before you begin,make sure:

_ TheTV/VCR is hooked up and turned on.

Channels are set up.

You make each entry within 60 seconds of the previous entry.

Manual Clock Setting

I

Press the MENU button,

PRI_ETUP _ESS_

VCR SETUP

CAPTION

REMINDER

-_ RIGHTNESS

2

Press the PLAY/A button or the STOPIV button to select

PRIM. SETUP. Then, press the RFWD/IP- button.

• SELECT IJ_,NGUAGE

AUTO PROGRAMMING

CH MEMORY REVIE_V

VOLUME BAR [ON]

SET CLOCK

SELECT &Y CHOOSE I_

O END PRESS EXIT

3

Press the PLAY/A button or the STOP/V button to select

SET CLOCK.Then, press the F.FWD_ button,

SET CLOCK

• AUTO CLOCK {ON]

SET MANUAL CLOCK

DAYLIGHT $VG TIME [ON]

SET TIME ZONE

[AUTOI

TO CONTINUE PRESS MENU

SELECT AV CHOOSE I_

TO END PRESS EXIT

• Entriesthat do not matchthe

TV/VCR'sclockor calendarwill

causea questionmark (?)to appear

on the screen.

• Tomakecorrectionswhileyouare

settingthe clock,pressthe CLEAR

button until the informationyou

want to correctis flashing.Then

enterthe correctinformation.

4

Press the PLAYIA button or the STOPIv button to select

SET MANUAL CLOCK, then press the F.FWDi_ button.

S'_ET i'IANUAL CLOCK 1

TiME ....

DATE - - / - - I

TO END PRESSEXIT

5

Press two Number buttons for the hour(s) and two

Number buttons for the minute(s).Then press I forAM

or 2 for PM. For example, for 9:30 PM, press 09, 30, 2.

I MANL_L CLOCK

TIME 09:30 PM __

MONTH - - I - - I ....

TO CORRECT PRESS CLEAR

END PRESS EXIT

6

Press two Number buttons for the month, two Number

buttons for the clay, and two Number buttons for the year.

For example, for July I, 2000, press 07, 0 I, 00.The day of the week

will appear automatically.

SET NANUAL CLOCK _,_

IO TIME 09:30 PM

DATE 07 I 01 / 2000

5J_'rORDAY

TO CORRECT pRESSCLEAR

END PRESSEXIT

©

c3

7

Press the STATUS/EXIT button.

14SettingtheClock(cont'd)

• •• • • ,• •1 • • • •l • J••••,• • •• •oo •o• •oJ o,, •• •,.°. .. • °° .°° ..°°°°°°.° .o° °° ,,°° °.° • ° ° ° .. °° ,,. .° ° .. °°°.°.

Automatic PBS Channel Selection

I

Press the MENU button.

•pR_MSETUP I PRESS1

_B CRPROGRAM

VCRSETUP

CAPTION

REMINDER

RIGHTNESS

2

Press the PLAYI& button or the $TOP/Y button to select

PRIM. SETUP.Then, press the F.FWDII_ button.

• SELECT LANGUAGE

AUTO PROGRAMMING

CH MEMORY REVIEW

VOLUME BAR [ON]

SET CLOCK

SELECT AV CHOOSE _"

O END PRESS EXIT

3

Press the PLAY/A button or the STOP/V button to select

SET CLOCK.Then, press the F.FWD/_ button.

SET CLOCK

• AUTO CLOCK [ON]DN]I

SET MANUAL CLOCK

DAYLIGHT SVG TIME {ON]

SET T_ME ZONE

[AUTO]

TO CONTINUE PRESS MENU

SELECT AV CHOOSE I_

TO END PRESS EXIT

4

If ON appears beside AUTO CLOCK, press the MENU but-

ton,

if OFF appears beside AUTO CLOCK, press the PLAYI_

button or the STOP/v button to selectAUTO CLOCK,

then press the F.FWD/I_ button so that ON appears to the

right of AUTO CLOCK.Then, press the MENU button.

IS T AUTO CLOCK

AUTO CLOCK USES

PBS CHANNEL DATA

> SET PBS CH AUTO

SET PBS CH MANUAL

SELECT &y CHOOSE Ib-

O END PRESS EXIT

I

5

Press the PLAY/A button or the STOPIY button to select

SET PRS CH.AUTO.Then, press the F.FWD_ button.

SIo TKIEAUTOCLOCK: t

DATE I / ....

NOW SEARCHING

END PRESS EXIT

6

NOW SEARCHING flasheson the TV/VCR screen.

7

When the TV/VCR finds the PBS channel, the time will

appear on the screen. Press the STATUS/EXIT button.

Ao,ogocK 1

TIME 06:30 PH

DATE 07/01 /2000

SATURDAY

O END PRESSEXIT

• If CANNOT FIND CLOCK DATA flashes on theTV/VCR

screen, you will be prompted to turn off theTV/VCR.Turn

oft the TV/VCR. Leave it off for several minutes.When you turn

on theTV/VCR again,the clock wilt be set

Wait for theTV/VCR to find

the time.

7

PHILIPS

SETAUTO CLOCK "_

IO IME

DATE - - / - - / ....

CANNOT FINO CLOCK DATA

END PRESSEXIT

Todisplay the time on the TVIVCR

screen, press the STATUSIEXIT but-

ton. Details are on page 26.

• You cannot use the AUTO CLOCK

feature if you don't receive a PBS

channel that carries a time signal in

your area. Set the clock manually.

16SettingtheClock(cont'd)

.. ° °. • ..° • • ..° . ..° .°. .° °°° .° ° ° . • °.,oo,,o,6, oo4_o_ ooo e,t_oltoll,o* _oleo _o_ oo o_o o* _,1 ool le_ eJl i_li,_oo mo _, • o • *_.w

Manual PBS Channel Selection

I

Press the MENU button.

VCR PROGRAM

I VCR SETUP

CA_TION

i REt4_NDER

BRIGHTNESS

2

Press the PLAY/A button or the STOP/Y button to select

PRIM. SETUP. Then, press the F.FWD/I_ button.

;

• SELECT LANGUAGE

AUTO PROGRAMMING

CH MEMORY REVIEW

VOLUME BAR [ON 1

SET CLOCK

SELECT &_Y CHOOSE I_

O _END PRESS EXIT

3

Press the PLAY/A button or the STOP/Y button to select

SET CLOCK.Then, press the F.FWD/I_ button.

I

SET CLOCK

SET MANUAL CLOCK

DAYLIGHT SVG TIME

SETTIME ZONE

[AUTO]

TO END PRESS EXIT

4

If ON appears beside AUTO CLOCK, press the MENU but-

ton.

If OFF appears beside AUTO CLOCK, press the PLAY/_

button or the STOP/v button to selectAUTO CLOCK,

then press the F.FWDil_ button so that ON appears to the

right of AUTO CLOCK.Then, press the MENU button.

I_. AUTO CLOCK 1

AUTO CLOCK USES

PBSCHANNEL DATA

• SET PBSCH AUTO

SET PBSCH. MANUAL

SELECT AV CHOOSE

O END PRESS EXiT

PHILIPS

5

Press the PLAY/A button or the STOPIY button to select elf Wait for the TV/VCR to

SET PRS CH. MANUAL.Then, press the F.FWD/I_ but- / find the time.

ton.

SELECT CHANNEL NUMBER

END PRESSEXIT

6

Use the Number buttons to select your PBS station.

7

NOW SEARCHING flashes on the TV/VCR screen.

8

When the TV/VCR finds the clock data, the time will

appear on the screen. Press the STATUS/EXIT button.

_AUTO CLOCK (PBS)CH _2

TIHE 06 : 30 PM

OATE 07 / 01 / 2000

SATURDAY

TO END PRESSEXIT

• If CANNOT FIND CLOCK DATA flashes on the

TV/VCR screen and you know another PBS channel,

press the PLAYIA button or the STOPIV button to

choose SELECT NEW PBS CH.Then, press the

F.FWD/I_ button. Repeat step 6.

• If CANNOT FIND CLOCK DATA flashes on the

TVIVCR screen and you do not know another channel,

press the PLAYIA button or the STOP/Y button to

select SET PBS CH.AUTO. Then, press the RFWD/_

button. The TV/VCR will search for the PBS channel automati-

cally.

• If the PBS channel is found, the time will appear on the screen.

• If the PBS channel is not found, you will be prompted to turn

off the TVNCR. Leave it off for several minutes.When you turn

on the TV/VCR again,the time will be set.

6

5

Helpful Hints

If you have an Antenna hookup, you

may select channels 2-69 at step 6.

If you have a cable connection, you

may select channels 1-125 at step

6. Details about available memo-

rized channels are on page I I.

Todisplay the time on the TV/VCR

screen, press the STATUS/EXIT but-

ton. Details are on page 26.

18Daylight.SavingsTime

• • , • • • .. • . • .,,. • . . ., • . . • • .

o0* ,Do •Doll ,* _,, •Do•oDin* • • •0 •Do • • •_61o •llo6oiJ,.tolot61mooto•ool ••ooo6 •l • • • • •o,_ *,_o,_

When the Daylight-Savings Time feature is ON, the TV/VCR clock

81

will automatically move forward one hour on the first Sunday in "" _ll

April and move back one hour on the last Sunday in October. L- mR

To turn Daylight-Savings Time ON or OFF, follow the steps below.

I

Press the MENU button.

• PRpM SETUP I PRESS1

V_RR PROGRAM

VCR SETUP

CAPTION

: REMINDER

IGHTNESS

J

2

Press the PLAY/. button or the STOP/Y button to select

PRIM. SETUP. Then, press the EFWD,_ button.

• SELECT LANGUAGE

AUTO PROGRAMMING

CH MEMORY REVIEW

VOLUME BAR [ON]

SET CLOCK

SELECT AV CHOOSE _"

O ENO PRESS EXIT

3

Press the PLAY/A button or the STOP/Y button to select

NET CLOCK.Then, press the F.FWD_P- button.

_- SET CLOCK

• AUTO CLOCK [ON]

SET MANUAL CLOCK

DAYLIGHT SVG TIME [ON]

SET TIME ZONE

[AUTO]

TO CONTINUE PRESSMENU

SELECT AV CHOOSE il_

TO END PRESS EXIT

4

Press the PLAY/A button or the STOP/V button to select

DAYLIGHT SVG.TIME.Tben, press the F.FWD/I_ button

so that ON or OFF appears beside DAYLIGHT SVG.TIME

(Daylight SavingsTime).

5

Press the STATUS/EXIT button.

TimeZone19

O,600ttO0, • OO0_IOOJOOO*iIItQOW_OQIJO6t_IOtOIOtOOllg,tI,,OOO_,OmlO_tJ =o. meO,*, =. OOe_O= = I_OI = .01 = • o,, _**l .=o.. i_

When you set the clock usingAUTO CLOCK, specify your time zone.

The TV/VCR will maintain the clock according to your time zone.

I

Press the MENU button.

!i_ PV_ s_TR_PAM ; IPRES_REM'NDERCAPT,ON

6

2 '

Press the PLAY/A button or the STOP/Y button to select IPRIM. SETUR Then, press the F.FWD/I_ button.

PRtMA_SETUP

• SELECT LANGUAGE

AUTO PROGRAMMING

CH MEMORY REVIEW

VOLUME BAR [ON]

SET CL_K

S_X ._ LECT "" CHOOSE • J

O END PRESS EXIT

3

Press the PLAYIA button or the STOPIY button to select

SET CLOCK.Then, press the F.FWD/_ button.

SETCLOCK

• AUTO CLOCK {ON])N] I

SET MANUAL CLOCK

DAYLIGHT SVG TIME [ON}31

SETTIME ZONE

[AUTOI

TO CONTINUE PRESSMENU

SELECT &V CHOOSE •

_ TO END PRESS EXIT

4

Press the PLAYI41, button or the STOPIV button to select

SET TIME ZONE.Then, press the F.FWD/_ button.

_ET TIME ZONE

• AUTO [ON]

ATLANTIC

EASTERN

CENTRAL

MOUNTAIN

PACIFIC

ALASKA

HAWAIi

SELECT AV

_O CONTINUE PRESS MENU

5

Press the PLAY/A button or the STOPIV button to select

your time zone.

6

Press the MENU button, then press the STA-_'US/EXIT

button.

C_ CDCD0

G3 C_3C_

CDCDS_3 --

Do

L

(::)o o _

J

If you select AUTO at step 5, the

TVIVCR will set the clock according

to the time zone data of the PBS

station it finds.

You cannot select SETTIME ZONE

at step 4 if AUTO CLOCK is set to

OFF.

You may need to turn off the

TV/VCR for several minutes to

enable the TV/VCR to reset the

clock according to your time zone.

20FrontPanel

Cassette Compartment

Insert a video cassette tape here.

Wireless Remote Sensor

Receivesa signalfrom your remote controlso

you canoperatethe'I'V/VCR from a distance.

STOP/EJECT Button

Pressonce to stopthe tape.When playbackis

stopped,pressto ejectthe tape. Pressto

select an item in the menu.

VIDEO In Jack

Connect this jack to the video out jack of a

camcorder or aVCR. Detailsare onpage31.

AUDIO In Jack

Connect this jack to the audio out jackof a

camcorder or aVCR. Detailsare on page31.

EARPHONE Jack

Connect earphones(not supplied) here for

personallistening.

REW(ind) Button

When tape playbackisstopped,pressto rewind

the tapeat high speed. Duringplayback,pressto

rewind the tape while the picture stayson the

screen.Pressto changea setting of a pop up

menuitem (for example,to adjustthe BRIGHT-

NESS)or to return to a previous menu.

PLAY Button

Pressto playa tape. Detailsare on page 28.

Pressto releaseSlow,Searchor Still mode

and return to normal playback.Detailsare on

page41. Pressto select an item in the menu.

F,EVVD Button

When tape playbackis stopped,pressto fast

forward the tape at high speed.Duringplay-

back,pressto fastforward the tapewhile the

picturestayson the screen.Pressto changea

setting of a menu item(for example,to adjust

the BRIGHTNESS)or to advanceto the next

menu.

REC(ord)/OTR Button

Pressonce to start a recording. Detailsare on

page29. Pressrepeatedly to start a One-

TouchRecording (an immediatetimed

recording, 30 minutes to eighthours long)of

the channelyou are watching.Detailsare on

page30.

RECORD Light

This lightappearsduringa recording. It flashesslowly when

the"I'V/VCR power isturned offto set a timer recording. It

blinksrapidly when a recording ispausedor when the power

isofffor a timer recording, but there isno tape inthe

"I'V/VCR.It will blink rapidly two minutesbeforea timer

recording isset to beginifthe "I-V/VCRpower ison.

VOLUME AI_

Buttons

Pressto adjustthe

soundlevel.

Pressthe CHANNEL

button andthe

VOLUME _ button

on theTV/VCR at

the same time to

displaythe pop up

menu.Pressagainto

remove the pop up

menu,

-CHANNEL _1_

Buttons

Pressto scanthrough

the"I-V/VCRchannels.

Duringtape playback,

pressto adjustthe

tracking, Detailsareon

page52.

Press the CHANNEL

button andthe

VOLUME _ button

on the TV/VCR at

the same time to

display the pop up

menu.Press againto

remove the pop up

menu,

POWER Button

Pressto turn the poweron or off.

Page is loading ...

Philips CCB193AT Owner's manual

Philips CCB193AT Owner's manual

Related papers

Other documents