Page is loading ...
User Manual of TOKEBI,
Hand Blender
Buwon Electronics Co., Ltd.
3
Contents
• Precaution for Basic Use 4
• Precaution for Use of Blade 5
• Precaution for Use of Blender 6
• Precaution for Use of Blender Mixer 7
• Product Specifications and Components 8
• Basic Components of Product 9
• Product Using Guide 10
• Before Asking A/S 13
• A/S Guide 14
• Warranty 15
4 5
7
0/-:7
7
0/-:7
7
0/-:7
7
0/-:7
Precaution for Basic Use
Do not disassemble, nor repair·modify the blender.
- It can cause the injury.
Do not wash the blender nor dip into the water.
- It can cause the re accident and mechanical failure.
The power cord must be unplugged after using of it.
And in case the blade area of the blender is washed with
owing water of the sink, the power cord must be unplugged.
Please keep it out of reach of children.
(It can cause a negligent accident.)
Power must be used only for 240V.
In case power cord is damaged, it is dangerous to use.
please contact the service company to get the A/S.
(Refer to 5 page in regard to the repairs of the damaged electric
code)
Precaution for Use of Blade
Please t the blade correctly before using the blender.
In case the blade of the blender is loose, stop using it.
- Refer to P8 for more details.
(It can cause an accident.)
The appliance needs to be unplugged before changing the blade.
(It can cause an accident)
The blade area must not be touched by hand while the blender is in
use.
(It can cause an accident.)
The protector should be completely screwed before using the
blender, and the fastening state of the blade should be checked in
advance.
(It can cause an accident.)
6 7
Precaution for Use of Blender
Precaution for Use of Blender Mixer
Switch on the appliance only when the blender stick is inside the
container during use.
(It can cause an accident.)
Fill the container with water and dip the blender stick into it and
run about 20~30 seconds after every use for cleaning.
(It can cause the mechanical failure.)
This product needs to be relaxed for 3 minutes after continuous use
for 1 minute, and do not use it for more than 3 times consecutively.
- It can cause a product damage.
- Dry materials or materials with less moisture must be operated in
a moment (for short time).
Do not drop or impact it.
(It can cause a failure.)
In case the blender mixer is disassembled and washed with hands,
please be careful about the blade area.
(It can cause an accident.)
When using blender mixer, please make sure the groove of the
blender mixer clutch should be properly t with the rotation shaft
pin of the blender.
(It can cause an accident.)
When using the blender mixer, the volume of the material should
not be exceeded(300ml), the materials to be processed should be
cut as 2~3cm, and put into the slot. Please make sure the lid should
be closed tight.
(It can cause the popping out of the blender mixer.)
The blender mixer should be disassembled from the blender after
the operation of the motor is completely stopped.
(It can cause a failure.)
300ml
8 9
Basic components of Products
GG
G
GG
G
GG
G
GG
G
GG
G
★Product Specications and Components
- Specications
Model V series (Common Use)
Usage Mixer/ Blender/ Mincer / Cutter/ Foam
Rated Voltage 240V/50Hz Product Weight 1Kg
Power Consumption 170W Product Dimension 350x170x405
Rated Time of Use 1 Minute Length of Cord 1.5m
Rated Capacity 300ml Material ABS, PC, STS, SAN
■Names of Product Parts
Basic Composition
of Product
Blender (TOKEBI), Stand, Multi-Purpose Blade, Foam Blade, Blade Remover,
User Guide, Quick Guide
Blender
(TOKEBI)
Stand
Blade Remover
Multi-Purpose Blade
Foam Blade
*
This above product image is for the representative purpose.
Actual product may dier from this diagram.
■Blender Mixer
- The appliance is to be operated after taking after sale service in
case the electric code get damaged.
- It can cause the accident if the appliance is disassembled
intentionally. It should be replaced or repaired at the place of
purchase or the authorized service center.
- Please equip the adaptor in case of plugging into a 110V socket.
Hole Stopper
Blender Mixer Cover Blender Mixer bowl Measuring Cup
10 11
⒫
캰
⒫
캰
⒫
캰
⒫
캰
⒫
캰
⒫
캰
⒫
캰
⒫
캰
Product Using Guide
1. Method of Use of Blender
■Method of Holding the Blender
As the blender is ergonomically designed, the operation of this machine
may be more convenient if you grip back part of the switch.
■Method of Blender Operation
The One-touch type switch (Starts if the switch is pushed / Stops if
released) is operated by pushing with index nger after gripping the
blender rmly. Hold the body rmly while moving it up and down.
■Method to Prevent the Popping of Foods
- Pour the food materials over the protector and operate it within the max.
volume (Abt.300ml)
- In order to operate more easily, do not take much amount of foods at a
time and add them gradually.
2. Washing Method
If the blade and protector area are dipped into the warm water and rotated
for about 20~30 seconds, food scraps are washed clearly.
(It must be washed before & after each process)
The unwashed food remaining stuck at the supporting shaft should be
wiped with a dry dish towel.
3. Method of Blade Replacement *Note : The power cord must be unplugged at time of
blade replacement.
■Method of Equipping the Blade
Grip the blade and push it against the rotating rod.
The pin of the shaft
■Method of pulling out the blade
The blade is to be removed by putting the front part of blade remover
into the blade.
* The blade must be removed after unplugging the appliance only.
(It can cause an accident.)
■Method of loosening the blade
Widen the part which has 2 lines side by side by inserting the tool (driver)
into the blade pillar.
■Method of fastening the blade
Slightly push the groove dented in the blade combination part and
the opposite part having 2 lines together to the inside of pillar using
appropriate tool.
※
Tools other than the blade remover are not provided with main components of this pakage.
⒫
캰
12 13
4. Method of Use of Blender Mixer
■Opening the Cover.
Hold the blender mixer and grip the lid hole, and unlock the lid by turning
it clockwise, and lift it up to open the cover.
■Closing the Cover.
Put the cover into the blender mixer by gripping the lid opening with
hands, and close the cover by turning it counterclockwise until the “click”
sound is made.
(The locking is OK, if the blender mixer and the cover can be lifted up
together by lifting up lid opening.)
■Putting Food Material
Pour the food material inside the container through the lid opening.
■Connecting the Blender with Blender Mixer
Keep the blender mixer on the flat area. And close the
feeding entrance with the stopper after putting all food
materials into it. After removing the blade from the blender
shaft by blade remover, properly t the blender shaft pin
with the groove of the blender mixer clutch as shown in the
g.
Before Asking A/S
★ Please check the followings if there’re any problems during the use.
Symptom Check Points
The blade does not
rotate while motor
sound is heard!
This maybe caused by the hardened food scraps inside of the protector as it was not washed
clean after using, or was not used for a long time. At rst, unplug the power cord, and dip the
blade and protector into the hot boiled water for about 30~60 minutes and turn it on in the
clear water again.
(Be sure to keep water away from the blender.)
The motor is suddenly
stopped during the
operation!
It’s very in normal status. The motor will be automatically stopped if its temperature gets high
drastically.
Use it again after a while.
The multipurpose
blade is bent!
It seems to be defective.
This is the design of the blade.
It is common that one mixer blade is bent upward, while the other is downward one by one.
Don’t worry and use it.
The blade falls out so
often!
Slightly push the groove of the blade dented in the combination part and the opposite part
having 2 lines together to the inside of pillar using a tool. Just fasten it slightly to use, as it
would be dicult to equip or pull out the blade if fastened too much.
(Refer the instruction in pages)
14 15
Product Warranty
★ Please check the followings if you’d like to require the product service.
Product Name TOKEBI Warranty Period
Model No. Marked in the Product
1 Year from the date of purchase
Manufacture No.
Product Purchase Date Date Month Year Date Month Year
Customer Name Address
Name:
Telephone:
Agent
Address
(Company Name)
Name:
Telephone:
A/S Guide
■Guidelines for Free of Charge Service
The product under warranty will be repaired for free in case of any manufacturing defects.
■Guidelines for Charged Service
In following cases, actual repair and component expenses are to be charged additionally.
1. In case warranty period is expired.
2. In case warranty card has been lost, or mentioned items are changed.
3. Any cases caused by the careless handling.
4. Natural Disasters (Fire, Damage from Sea Wind, Gas Disaster, Earthquake, Damage from Storm and
Flood, Thunderbolt, etc.)
5. Damages arising due to the running of the appliance on the power source other than recommended.
6. In case the failure is occurred as the person other than the designated agent and service engineer tried
to repair.
7. In case the failure occurred as the cautions in the user manual is not observed.
The damage caused by the negligence of the user, or non-fulllment of the cautions stipulated on this
product is not guaranteed.
8. In case the failure occurred by the use of the consumable, optional items that are not designated by
our company.
9. In case of failures due to the user’s mistake and willful negligence.
10. In case of normal wear & tear of the product.
11. If used for the commercial purposes.
We hereby warrants as follows.
1. This product is manufactured through the quality control in accordance with the law for the quality
management of industrial products, and the strict test process of our company.
2. If there’s any problem with the product operated by the user in the normal condition, it will be repaired
or replaced at the place of purchase or authorized service center according to the contents of the product
warranty.
3. It will not be replaced if the product damage is caused by the negligence of the user, or non-fulllment of
the cautions stipulated on this product.
A) Product damaged by the user’s fault
B) Product damaged by the excessive impact like falling etc. after purchase
C) Product damaged by the non-fulllment of the cautions stipulated on this product
4. Whenever you would like to require the service, please submit this warranty card.
5. Please keep this certicate preciously as it is not reissued.
16
v공용-수정중 2012.3.16 8:44 PM 페이지16
Manufacturer : Buwon Electronics Co., Ltd.
100-23, Galsan-dong, Dalseo-gu, Daegu, Korea
/
