ADS Technologies TV STATION 100 Connection Manual

Brand
ADS Technologies
Model
TV STATION 100
Category
LCD TVs
Type
Connection Manual

This manual is also suitable for

ADS Technologies TV STATION 100 turns your LCD or CRT monitor into a TV. It supports resolutions up to 1280 x 1024 @ 75 Hz (SXGA) and has multiple input sources, including a TV tuner, S-Video, RCA (Composite), and VGA. It also has VGA pass-through, so your VGA monitor will work even when the TV Station is turned off. Other features include channel scanning, channel memory, fine tuning frequency scan, on-screen display, sleep timer, and brightness, contrast, saturation, hue, gamma, and sharpness settings. It includes a remote control, a 6 ft. VGA to 8 pin Din cable, a 6 ft. 3.5mm to 3.

ADS Technologies TV STATION 100 turns your LCD or CRT monitor into a TV. It supports resolutions up to 1280 x 1024 @ 75 Hz (SXGA) and has multiple input sources, including a TV tuner, S-Video, RCA (Composite), and VGA. It also has VGA pass-through, so your VGA monitor will work even when the TV Station is turned off. Other features include channel scanning, channel memory, fine tuning frequency scan, on-screen display, sleep timer, and brightness, contrast, saturation, hue, gamma, and sharpness settings. It includes a remote control, a 6 ft. VGA to 8 pin Din cable, a 6 ft. 3.5mm to 3.

TV Station 100™
Turn your LCD or CRT monitor into a TV
• Turn your LCD monitor into an LCD TV
• Use as stand-alone TV Tuner without a PC
• Connect to PC and switch from PC to TV viewing
• Supports Resolutions up to SXGA (1280 x 1024)
• Connect to a Projector using Component or VGA
connectors
Turn your LCD monitor into a TV
Convert any LCD or CRT monitor into a TV. Why buy expensive
LCD TV’s, when you can create one yourself with a computer
LCD monitor and TV Station 100? TV Station 100 lets you
connect to LCD or CRT monitors with either VGA or Component
(Red, Green and Blue) connections for the highest quality TV
signal.
Play DVD’s and Video on your Monitor
TV Station 100 includes audio and video (RCA or S-Video) inputs allowing you to connect
your DVD player, Set Top receiver or VCR to TV Station 100.
Remote Control
TV Station 100 includes an IR remote control allowing you to switch between PC or TV
mode, change channels, select Source input, set sleep timer and other features from the
comfort of your chair or sofa. An On Screen display confirms your channel and menu
selections.
Easy to Use and Simple to Install
TV Station is simple to setup and use. Just connect your TV source and connect to the
LCD or CRT monitor and you are ready to go! TV Station 100 features automatic channel
scan with channel memory and sophisticated frequency scanning for automatic fine tuning
on every channel. No Software installation required.
Product Features:
• Supports resolutions up to 1280 x 1024 @ 75 Hz (SXGA)
• Supports analog video input from all sources including Game Consoles, VCR’s,
Camcorders, DVD players – any device with an RCA (composite) or S-Video output
• Supports all LCD/CRT/Plasma/Projectors with VGA or Component (YPbPr)
connections
• Stereo Sound
• Supports multiple input sources: TV Tuner, S-Video, RCA (Composite) and VGA
• VGA pass through – VGA monitor works with TV Station turned off
• Channel Scanning, Channel memory (add/remove channels)
• Fine tuning frequency scan – Locks fine tuning for stunning image quality
• On Screen display for menu, channel display, volume control, sleep timer and mute
• Sleep timer – selectable 30, 60, 90 and 120 minute settings
• Brightness, Contrast, Saturation, Hue, Gamma and Sharpness settings
• VGA/Component (YPbPr) output switching
• Support for NTSC, PAL-BK, PAL-DK, PAL-I and Secam TV formats (specific
models)
Specifications
• Input:
o Cable Ready TV Tuner (Coaxial for US, IEC for Europe)
o VGA In (8 pin DIN) – custom cable connects to PC VGA card
o RCA (Composite)
o S-Video (Y/C)
o 3.5mm stereo audio input
o Right and Left Stereo audio RCA (Red and White RCA)
• Output:
o VGA (15 pin D-sub) – Standard Monitor cable connection
o 3.5mm stereo audio output
o Component YPbPr
• Power Supply – AC Wall Adapter
o INPUT: 100 – 240V ~ 50/60Hz 0.5A
o OUTPUT: +12VDC - 1A
• Weighted base unit:
o TV Station 100 does not tip over when all cables are connected
Includes:
• TV Station 100 unit
• 6 ft. VGA to 8 pin Din cable
• 6 ft. 3.5mm to 3.5mm Stereo link cable
• Custom A/V cable for Component Out and A/V inputs
• Remote Control
• Power Supply
• User Guide
• Base Stand
• Batteries: 2 x AAA
Minimum System Requirements
:
• Monitors: LCD, CRT, Plasma or projectors with VGA or Component Video input
• Powered PC Speakers
Product Part: PTV-360
UPC Code: 7-57887-36013-9
Suggested Retail: $129.95
Shipping: March 2005
ADS TECH
12627 Hiddencreek Way
Cerritos, CA 90703
800-888-5244
562-926-1928
562-926-0518 Fax
  • Page 1 1
  • Page 2 2

ADS Technologies TV STATION 100 Connection Manual

Brand
ADS Technologies
Model
TV STATION 100
Category
LCD TVs
Type
Connection Manual
This manual is also suitable for

ADS Technologies TV STATION 100 turns your LCD or CRT monitor into a TV. It supports resolutions up to 1280 x 1024 @ 75 Hz (SXGA) and has multiple input sources, including a TV tuner, S-Video, RCA (Composite), and VGA. It also has VGA pass-through, so your VGA monitor will work even when the TV Station is turned off. Other features include channel scanning, channel memory, fine tuning frequency scan, on-screen display, sleep timer, and brightness, contrast, saturation, hue, gamma, and sharpness settings. It includes a remote control, a 6 ft. VGA to 8 pin Din cable, a 6 ft. 3.5mm to 3.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents