www.PyleUSA.com
The PFA300 uses a Class-T audio amplier
IC for low distortion and acoustically
accurate reproduction of music.
Tone/direct switching allows for
customized listening via separate bass and
treble adjustments — or the original signal
can be passed through without enhancement.
The built-in loudspeaker protection circuit triggers
when the amplier is turned on to protect speakers from
high volume bursts of audio. Over-voltage protection circuit
shuts down the amplier if input voltage exceeds 14.4 V DC. State of the art design
using surf ace mount components and advanced engineering for proven perfor-
mance, reduced signal interference, and long operational life.
PFA300
90 Watt Class-T Hi-Fi Stereo Amplifier
with AC Adapter Included
www.PyleUSA.com
Built-In Safety Features
Short cut, overload, and overheat protection keeps this amp, as well as other
connected devices, functioning properly and safe. The built-in loudspeaker protection
circuit triggers when the amplier is turned on to protect your speakers from high
volume bursts of audio. Overload protection shuts down the amplier if input
voltage exceeds 14.4 volts.
Features and Technical Specs:
• 12V AC/DC Adapter
• Class-T Circuit Design
• Microphone Input Jack
• Speaker Impedance: 2-8Ω
• 3.5mm iPod/MP3 Input Jack
• Signal to Noise Ratio: >80dB
• Total Output Power: 90 Watt
• Input Power: DC 9 ~ 14.4V 2A
• Total harmonic distortion: <0.4%
• Frequency response: 20Hz-20kHz
• Short Cut, Overload & Overheat Protection
• Dimensions: 6.02'' x 4.96'' x 1.5''
Questions? Issues?
We are here to help!
Phone: (1) 718-535-1800
Email: suppor[email protected]
This product can expose you to a chemical or group of checmicals, which
may include ”Nickel Carbonate” which is known in the state of California to
cause cancer, birth defects, or other reproductive harm. For more info, go to
https://www.p65warnings.ca.gov/.
/
