2. Drolet
  3. AUSTRAL III WOOD STOVE
AUSTRAL III WOOD STOVE

Drolet AUSTRAL III WOOD STOVE, BLACK STAG II WOOD STOVE, LEGEND III WOOD STOVE Assembly Instructions

  • Hello! I am an AI chatbot trained to assist you with the Drolet AUSTRAL III WOOD STOVE Assembly Instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What is the purpose of the Drolet BLACK STAG II WOOD STOVE?
    What type of fuel does the stove use?
    What is the maximum log length that can be used in the stove?
    What is the heating capacity of the stove?
    What are the dimensions of the stove?
    What type of material is the stove made of?
    What is the weight of the stove?
    What safety features does the stove have?
Printed in Canada
Fresh Air Intake Kit for
Wood Stove on Legs
AC01204
46136A
2020-05-19
Installation
Instructions
3
1. Application
This fresh air intake kit is designed to be installed on a wood stove with legs. The vent termination
must be installed outside the building.
2. Kit Contents
Air Intake Housing 5"
(D) 1x
Self-adhesive gasket
(E) 48" long
Black metal screw #10 x ⅝"
(F) 4x
Clamp
(H) 2x
Air Intake grille 5"
(J) 1x
Mobile Home Bracket
(L) 4x
3. Other Required Parts (not included)
HVAC flexible insulated pipe in
accordance with ULC S110 or UL 181,
class 0 or class 1.
(G) 1x
Screws for the air intake grille
(K) 4x
4. Suggested Tools
or
ou
or
Powered Driver Robertson or Phillips screwdriver
4
5. Installation Instructions
The following images are showing a generic wood stove model. Even if your stove
is different, the installation steps are identical.
Step 1. Remove and keep the screws (A, 4x) that holds the air control cover in place.
A
4x
Step 2. Remove the air control cover (B) and the ash drawer (C).
5
Step 3. Cut to length and install strips of self-adhesive gasket (E) on the fresh air intake (D) as
shown.
6
Step 4. Position the air intake underneath the stove and fix it at the back with two screws (F, 2x).
2x
7
Step 5. Fix the air intake on the front of the stove with two screws (F, 2x).
2x
2x
8
Step 6. Reinstall the ash drawer (C) and the air control cover (B).
Step 7. Fix the air control cover (B) on the stove using screws (A, 4x) kept from Step 1.
A
4x
9
Step 8. Make a 6" x 6" (150 mm x 150 mm) opening in the outside wall behind the unit. Install a 5"
insulated flexible duct (G) to the air intake adapter using a clamp (H). Attach the other end
of the flexible duct to the air intake grille (J) with another clamp (H). Secure the air intake
grille with 4 screws (K, 4x), not supplied in this kit.
H
2x
G
J
K
4x
Example 1
H
G
J
K
4x
2x
Example 2
The fresh air intake assembly and duct should be inspected periodically to ensure
that it is not obstructed.
10
9. For a mobile home installation, use the leg retainers (L, 4x) to secure the stove to the floor. Use
the appropriate hardware (M, 4x) for the flooring.
L
4x
M
4x
SBI HEATING ACCESSORIES
255 De Copenhague Street
Saint-Augustin-de-Desmaures
Québec, Canada
G3A 2H3
418-908-8002
/