Draper Mechanic's Creeper Operating instructions

Type
Operating instructions

This manual is also suitable for

No.
1
2
3
4
5
6
7
Qty
1
6
1
13
12
13
12
Description
Plastic Body
3" Swivel Castor
Head Rest
Bolt
Nut M6
Flat Washer
Sleeve
1
3
5
6
7
2
4
DRAPER TOOLS LTD, HURSLEY ROAD, CHANDLER'S FORD, EASTLEIGH, HANTS. SO53 1YF. U.K. www.draper.co.uk e-mail: [email protected]
RWJB1017
MECHANICS
CRE EPER
81907 & 81908
SPECIFICATION
Stock no. .............................................................................................. 81907...................................81908
Part no. ................................................................................................ CC4/G.................................CC4/O
Overall length ...................................................................................... 1010mm ............................1010mm
Overall width ........................................................................................ 475mm................................475mm
Max. weight capacity.............................................................................. 120kg...................................120kg
SAFETY INSTRUCTIONS
Do not place under car tyres or use to move or reposition vehicle.
Do not use as a toy or skateboard.
Do not stand on car creeper or use as a stepping device.
Do not use if any part of the car creeper is defective or damaged in any way.
Always store in an upright position in a secure place.
Keep out of the reach of children.
ASSEMBLY
Put bolt (4) through hole of caster (2) and thread into underside of creeper body.
Put sleeve (7) over bolt thread.
Place flat washer (6) up to sleeve and screw nut (5) onto bolt until tight.
Repeat for all 6 castors.
Mechanics Creeper - 81907 & 81908
Instruction Sheet Artwork
  • Page 1 1

Draper Mechanic's Creeper Operating instructions

Type
Operating instructions
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI