KRAUS KTM33 Installation guide

VERSION 1.1

Top mount sink installation

2. Cut along the top-mount line.

1. Verify cabinet clearance.

3. Insert the clips into the channels.

Wipe away any

excess sealant.

Insert the sink.

Tighten to secure sink.

Rotate the clip.

4. Drill pilot hole and then cut the countertop opening.

(must be done by professional)

5. Verify fit. Adjust cutout if needed.

7. Apply silicone sealant.

8. Install the strainer(s).

(bottom view)

CHANNEL

MOUNTING

CLAMP

SINK

FASTENER

COUNTERTOP

SILICONE CAULK

(NOT FURNISHED)

KTM SERIES

KTM-24 | KTM-25 | KTM-32 | KTM-33

VERSION 1.1

This manual is also suitable for

Download PDF