Livex Lighting 41184-04 Operating instructions

Type
Operating instructions

This manual is also suitable for

Livex Lighting 41184-04 is a versatile lighting fixture that offers a range of features for customizable lighting in your home. With its adjustable cord length, you can tailor the hanging height to suit your specific needs, ensuring optimal illumination for any space.

The fixture's electrical compatibility allows for easy integration into your existing wiring system. The clear instructions guide you through the installation process, ensuring a secure and seamless setup.

Once installed, the Livex Lighting 41184-04 provides ambient lighting with its included shade, casting a warm and inviting glow in your room. The mesh enclosure adds a decorative touch while safeguarding the bulb from accidental contact.

Livex Lighting 41184-04 is a versatile lighting fixture that offers a range of features for customizable lighting in your home. With its adjustable cord length, you can tailor the hanging height to suit your specific needs, ensuring optimal illumination for any space.

The fixture's electrical compatibility allows for easy integration into your existing wiring system. The clear instructions guide you through the installation process, ensuring a secure and seamless setup.

Once installed, the Livex Lighting 41184-04 provides ambient lighting with its included shade, casting a warm and inviting glow in your room. The mesh enclosure adds a decorative touch while safeguarding the bulb from accidental contact.

ASSEMBLING & INSTALLATION INSTRUCTIONS
The drawing shown may not exactly match the product enclosed.
However, the installation instructions do apply to this product.
41184
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.
ATTENTION! COUPER LE COURANT AU FUSIBLE OU UN DISJONCTEUR.
ASSEMBLING THE FIXTURE (Fig.1)
1. Shut off the power at the circuit breaker box. Remove old fixture and
all hardware from Junction Box.
2. Carefully unpack your new fixture and lay out all the parts on a clear
area. Be care not to lose any small parts necessary for installation.
3. While holding the lamp body(C) towards the ceiling, attach the single
bar to the Junction Box with the two junction box screws as shown.
The side of the single bar marked "GND" must face out. The junction
box is not included.
4. By measuring, determine correct cord length needed for proper
hanging height. NOTE: slide cord clip to the proper position,
then you may cut extra cord.
5. Connect the electrical wires as Shown in Fig.2, making sure that all
wire nuts are secured. You may have to wrap the connections with
electrical tape. If your outlet has a ground wire (green or bare
copper), connect the fixture ground wire to it. Otherwise connect
fixture’s ground wire directly to the Mounting plate with the green
screw provided. After wires are connected, tuck them carefully
inside the Junction Box.
6. Install the canopy(A) onto the junction box, the pipe thread protrude
from the hole in the canopy and rotation the coupling(B) until tighten
it, then lock it securely with the plastic screw. Attach the shade(D)
onto the lamp holder, lock it securely with the check ring(F).
7. Install the light bulb(Not included) in accordance with the fixture’s
specifications. NOTE: DO NOT EXCEED THE SPECIFIED
WATTAGE!
8. Raise the mesh enclosure(G) to the bottom of shade, lock it securely
with the screws(E).
Your installation is now complete. Return power to the junction
box and test the fixture.
Cordclip
C
D
G
FE
WHITE
HOUSE
Black
WIRES
(Hot)
FIXTURE
WIRES
BLACK
WIRES
FIXTURE
Bare
FIXTURE
WIRES
(Ground)
HOUSE
(Neutral)
WIRES
White
Green or
WIRES
HOUSE
Copper(Ground)
GREEN
Thread
Thank you for purchasing a LIVEX product.
Need assistance with parts or assembly? Please call customer service at: 800-761-8056
Or visit us online at: WWW.LIVEXLIGHTING.COM
©COPYRIGHT ALL RIGHTS RESERVED.LIVEX LIGHTING,INC. DOC20180341184
FIG.2
FIG.1
  • Page 1 1

Livex Lighting 41184-04 Operating instructions

Type
Operating instructions
This manual is also suitable for

Livex Lighting 41184-04 is a versatile lighting fixture that offers a range of features for customizable lighting in your home. With its adjustable cord length, you can tailor the hanging height to suit your specific needs, ensuring optimal illumination for any space.

The fixture's electrical compatibility allows for easy integration into your existing wiring system. The clear instructions guide you through the installation process, ensuring a secure and seamless setup.

Once installed, the Livex Lighting 41184-04 provides ambient lighting with its included shade, casting a warm and inviting glow in your room. The mesh enclosure adds a decorative touch while safeguarding the bulb from accidental contact.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI