HOWTOPAIRTHEEARPHONES
1.Enterintopairingmode
1)In Power‐off state, hold the
button firmly for 5 seconds. Pairingis successful when the LED indicator
blinksalternatingbetweenred&bluelight.
2) The device will go into "Standby" mode if user releases the
button before the LED indicator starts
blinkingalternatingbetweenred&blue.Pleaseturntheunitoffandtryagain.
2. Enable the Bluetooth function of the device you wish to pair your earphones with. Then search for
SY‐X1233BTandclickittopair.
LEDINDICATION
COLOR STATUS INDICATE
Blue Stayfor1second Poweron
Red Stayfor1second Poweron
Red&Blue Blinking Pairing
Blue Singleblinkevery2seconds Standby
Blue Blinkrapidly Incomingcall
Blue Blinkrapidly Dial
Blue Doubleblinksevery2seconds Phonecall
Blue Doubleblinksevery2seconds MusicPlay
Red Solid Charging
Blue Solid Chargecomplete
Red Single blink every 20 seconds;
Audio
Lowbattery
OPERATION
BASICOPERATION
Function Operation Signal/Prompt
Power‐on
Hold
for2seconds
Bluelightstayfor1second;
Audio
Power‐off
Hold
for3seconds
Redlightstayfor1second;
Audio
Pairing
Inoffstate,hold
for5
seconds
Alteringred&blueblinks;
Audio
Connected SingleBlueblinkevery3
seconds
Reconnect(manual)
TurnoffNice16,hold
for5
seconds
MUSICFUNCTION
Function Operation Signal/Prompt
Play/Pause
Pressthe
button
Audio
Previous/Next Pressthe"Pre"/"Nex"button