2. Luxpro
  3. XP1812 PRO Triangle LED Worklight

Luxpro XP1812 PRO Triangle LED Worklight, XP1812 User manual

  • Hello! I've reviewed the user manual for the LuxPro XP1812 PRO Triangle LED Worklight. This document contains information on how to use and maintain your worklight, including battery replacement, operation instructions and its key features such as the swivel area light, magnetic base and auto shutoff feature. I'm ready to answer any questions you have about this device.
  • How do I turn the worklight on and off?
    How do I cycle between modes?
    Where is the battery access door located?
    What is the warranty period?
2 Modes: High / Low
PRO Triangle LED Worklight Rugged design
Swivel area light
Collapsible hook
Protective rubberized armor
Magnetic base
Auto shutoff when closed
XP1812
Weather resistant IPX4
Features
Operation Instructions
Usage and Maintenance
Battery Replacement: In a dry environment, locate the
battery access door opposite from the on/off button.
Press lightly and push the battery access door down.
Remove batteries. Insert new batteries into the tubes
following the +/- symbols to ensure proper battery
arrangement. Carefully reinstall the battery access door
by pushing lightly upwards until the door clicks into the
closed position.
14725 S Porter Rockwell Blvd Ste C
Bluffdale, UT 84065
luxpro.com
866.553.8886
USER MANUAL
Care Instructions: If you know it’s going to be a while
between uses, we suggest removing batteries from your
light and storing your gear in a dry, protected place.
Magnetic
On/Off: Press button and release or swivel the head into
the closed position.
Cycle Modes: Press and release button (High/Low)
Low
High
ANSI/PLATO FL1 STANDARD
440 lm
1050 lm
LUMENSMODES
35h
7h
RUN TIME
30m
60 m
BEAM
DISTANCE
4C
Batteries
Product Warranty
Limited 90-Day Warranty against manufacturer’s defects
from time of purchase. For warranty claims contact
LuxPro by calling 801-553-8886 or sending an email to
[email protected].
/