1
KTCL KMR.6050
SKU 15260502 15260514 15260538
DUAL POWER CONSOLE LOVESEAT
2双2电动零重力带几|电靠|USB|金属杯托
Manufacture Name:JASONFURNITURE VIET NAMCOMPANY LIMITED
2
List of Parts
TOOS REQUIRED:NO TOOS REQUIRED
NO
PART LIST
Description
Sketch Quantity
A
B
C
D
E
F
G
1
1
1
1
1
1
1
H3
Wing(L)
Wing(R )
Back(L)
Back( R )
Back(middle)
Body
Power Cord
Screws
Location of KD parts
R
LL
R
LL
A
B
CDE
F
GD
H
3
ASSEMBLY INSTRUCTIONS
Step 1:
Step 2: Step 3:
Install the Left Backrest(L) into the Seat by positioning
the female metal receiver brackets over the male metal
posts.
Ensure that female metal receiver brackets on each side
of the backrest are positioned over the seat metal posts.
Push down the female brackets over male posts
simultaneously until each side is locked into place an
audile “click” is heard.
Install all backrests pieces in the same way described
above.
Install Console Back(middle) by inserting 3 screws(H) into
pre-drilled holes on Console Body. Screw up from bottom
to fix the console back.
Install left and right wing by inserting brackets
C
D
E
A
B
H
F
F
F
4
POWER CONNECTIONS
Step4
Ensure that wall power outlet is operational.
Connect firmly one end the wire plug transformer cord into
the DC adaptor located at the lower back corner of the left
of recliner and plug the other end of the transformer cord
into a power outlet/wall socket.
After all the connections are made, the green LED will be
lit up.
G
5
POWER CONNECTIONS
STEP 5
STEP 7
STEP 6:Connect
6
7
Electrical Controls
Step8
1
2
3
4
direction
1.Press button
2.Press button Home Button
3.Press button Headrest Forward
4.Press button
Headrest Backwards
Seat Forward
1
2
3
4
8
WARNINGS
9
CARE AND CLEANING
10
TROUBLESHOOTING
PROBLEM SOLUTION
Not Reclining
USB not working
Backrests gaps
Ensure that wall power outlet is operational Step 4,5,6,7
Check all ower connections Step 4,5,6,7
Ensure the backrests are properly clipped into the male posts located on seat mechanism.(Step 1 2 3)
Check that brackets are not loose, positioned improperly or bent.
/
