feather & black 251-01126 Assembly Instructions

Brand
feather & black
Model
251-01126
Type
Assembly Instructions
www.featherandblack.com
A
s
s
e
m
b
l
G
u
i
d
e
Orla
Orla Ottoman Bed
Produced in China for Feather & Black www.featherandblack.com14
Overall Dimensions (LWH mm)
Double:
King:
Storage Dimensions (LW mm)
Double:
Super King:
King:
Super King:
2080
x 1550 x 1110
2180 x 1700 x 1110
2180 x 2000 x 1110
1920 x 1380 x 305
2020 x 1530 x 305
2020 x 1830 x 305
Technical Specifications
Ottoman Piston Rating
Double & King: 1000 N
Super King: 1100 N
L
155
35
W
H
375
40
35
30
345
Floor to top
of mattress base
board
to top of
mattress base
board
Top of side rail
WARNING! HAZARD - DO NOT REACH INTO THE SPACE BELOW!
Note: Be very careful what you
store under the bed -the top of
an item, like a suitcase or a box
must not touch the slats or they
may be damaged. Maximum
storage height is 315mm .
WARNING!HAZARD - DO NOTREACH INTO THE SPACE B ELOW!
WARNING
TO AVOID ACCIDENTS
To access the storage area, the ottoman frame
MUST BE FULLY OPENED and then
FULLY CLOSED afterwards.
CAUTION
To be operated by ADULTS ONLY.
Keep children and pets away from the storage area.
Avoid trapping your fingers by using the handle
to lift & lower the base.
Only lift when the mattress is in place.
Ensure the ottoman support bar is secure when the
base is open.
Regularty air internal storage area and contents.
!
Orla Ottoman Bed Orla Ottoman Bed
Produced in China for Feather & Black www.featherandblack.com13
13.
100%
Parking position
Set the inner stem to the correct length so the end just touches
the retaining bracket - it needs to touch to hold it in position.
Adjust the retaining bracket (R) so
the stem end scrapes the surface.
Setting the inner stem of the support bar (Q), adjust the inner stem to the correct length.
Produced in China for Feather & Black www.featherandblack.com
2
Before you start
Time to assemble
Missing parts or faulty products
during assembly, or a part is unfortunately faulty
please call our customer service team on 01243
380600
1 hour approx
assembly time
Necessary tools
Cross head
screwdriver
Tape measure
Number of people required to assemble
Two people to assemble the product and
two people to lift in to position.
Thank you for purchasing the Orla Ottoman Bed
Please read these instructions fully prior to
assembly to familiarise yourself with the
various stages of construction. Carefully open
all packs supplied and check the contents
against the parts and
Do not destroy any of the packaging until you
are certain that you have all the necessary
parts for the assembly.
This item is heavy once assembled. Please
try to assemble the item as close as possible to
the point of use. Take care when moving the
item to avoid personal injury or damage to the
product and always lift rather than drag.
There are small components used in the
construction of this furniture as well as plastic
packaging, these should be kept away from
young children whilst assembling.
Product Safety
All assembly fastenings should always be
tightened properly and care should be taken to
ensure that no
Periodically check and ensure that all
components are in their proper position, free
from damage, and that all connectors are tight.
Please note depending on the lighting,
positioning and surroundings of your room, the
shade of the colour can sometimes appear
Over a period of time the
colour might lighten or fade slightly due to light
exposure.
Product Care
To clean, slightly moisten cloth with water
and wipe surfaces. A damp cloth holds dust
and prevents damage. repeat with a dry, soft,
lint-free cloth or, if fabric, remove dust using a
low suction vacuum .renaelclc
Do not use abrasives or cleaning products
which may contain ammonia or solvents as
Orla Ottoman Bed
Produced in China for Feather & Black www.featherandblack.com3
Orla
Ottoman
Bed
IMPORTANT OTTOMAN SAFETY WARNINGS
IMPORTANT – READ CAREFULLY – RETAIN FOR FUTURE REFERENCE
You must ensure that the mattress is on the bed frame before operating the
lift mechanism – Failure to do so could result in injury.
Keep hands clear of the mechanism when opening or closing the ottoman.
Beware of entrapment – Never reach in through the mechanism to access
the storage area.
Always ensure that the ottoman is FULLY opened before accessing the
storage area.
Do not exceed the maximum weight as specified in the table below:
Don’t lift without mattress Ensure mattress is on before lifting
•Use caution when operating, always use the handle when lifting.
•Note: This bed uses a pressurised mechanism.
•To be operated by adults only.
•Please ensure that children and pets are kept away from the bed when
operating the lift mechanism.
•Keep children and pets away from the storage area.
•Do not overload the internal storage base.
•Do not stand inside the internal storage area of the bed.
•Before removing the mattress secure the frame to ensure it does not open
unexpectedly.
•Do not attempt to lie on the mattress when the ottoman is in the raised
position.
•When lifting the ottoman, remove all bedding except the fitted sheet.
IMPORTANT OTTOMAN SAFETY WARNINGS Cont.
Bed Bed Size Min Weight (kg) Max Weight (kg)
Double 10 40
King
Super King
15
20
45
50
WARNING!HAZARD- DO NOT REACH INTO THE SPACEBELOW!
WARNING!HAZARD- DO NOT REACH INTO THE SPACEBELOW!
Orla Ottoman Bed
Produced in China for Feather & Black www.featherandblack.com12
12.
dx1
x5cbm x5 x5
11.
mx2
bx2
cx2
m
b
c
mx2
bx2
cx2
ax2
cx2
ax2
cx2
dx1
x6ca x6
K
Q
S
R
L
M
N
O
90%
100%
100%
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
cm
Produced in China for Feather & Black www.featherandblack.com
4
Parts
Important infomation
Orla Ottoman Bed
A
1
1
1
1
B
K
L
M
M
N
O
P
C
E
F
G
G
H
I
H
J x5
F
D
Parts list
2
A. Headboard
B. Footboard
C. Side Rail - LH
D. Side Rail - RH
F.
The bed you have purchased comes with a solid mattress base board, please follow the instructions
below in the current order. Before you begin building your bed, please take a moment to read through
the instructions and make sure that you've got all the relevant parts listed on the following pages.
1/2E.
Support Brackets
Double & King/Super King
Double & King/Super King
Angled Corner Brackets
2
G. Feet
2H. Storage Base Boards
Mattress Base Board - Headend
1
I. Cross Bar
1
1
1
2
O. Storage Base Board Support Bar
K
L. Mattress Base Board - Footend
M. Mattress Stoppers
1N.
Metal Plate for Fabric Hand Strap
2
J. Fabric Hand Strap
3/4
P. Mattress Base Board Support Bars
Q
RS
1
1
Ottoman support bar PACK (O.S.B.)
Ottoman support bar
Fixed retaining bracket
Parking bracket
Q.
R.
S. 1
9.
H
Orla Ottoman Bed
Produced in China for Feather & Black www.featherandblack.com11
10.
dx1
c
b
ex4 x4 x4
ex2
dbx2 cx2
I
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
cm
Produced in China for Feather & Black www.featherandblack.com
5
Orla Ottoman Bed
Spring washers for M8 bolts
aDouble & King x22
Super King x24
Double & King x28
Super King x30
Double & King x18
Super King x22
Double & King x24
Super King x28
Double & King x12
Super King x16
Double & King x28
Super King x30
b
Flat washers for M8 bolts
c
Allen key for M8 bolts
d x1
Hardware pack (A) needed for fixing side rails and legs (F) to headboard & footboard
packed in side rail pack, 2 of 2
Fixture and fitting supplied (not actual size)
tlob 8M rof stu N
f x2
m x5
b x5 c x5
Bolts (M8x25mm) for fitting
ottoman support bar
Flat washer for M8 bolts
Q x1 S x1
R x1
Spring washer for M8 bolts
Hardware needed for fixing ottoman support bar (O.S.B) to the mattress base board
packed in the side rail carton, inside Pack 3 - hardware pack (C
)
Ottoman Support Bar Fixed retaining bracket Parking bracket
Spring Washer for M8 bolt
g x2
f x2 k x1
Flanged lock-nuts M8
for gas-lift pistons
Nuts for M8 bolts Tube spanner for M8 nut
b c
a x10
j x2
e
Bolts (M8x50mm)
e x4
Bolts (M8x50mm)
Bolts (M8x30mm)
Threaded stud (M8x50mm)
Hardware needed for fixing mattress base board
Packed in mattress base board carton, inside Pack 4 - hardware pack (B)
Spanner for M8 nut
h x1
Flat Washer for M8 bolt
Orla Ottoman Bed
Produced in China for Feather & Black www.featherandblack.com10
8.
fx2
k
bx2
cx2
ax4
bx4
cx4
7.
dx1 k x1f x2
x6cba x4 x6
x2
J
JJ
C
&
D
Orla Ottoman Bed
A
C
D
B
1.
100%
Make certain the bed is squared up
as shown in the diagram then tighten
all bed assembly bolts 100%.
dx1 h x1f x2
x22cba x20
Produced in China for Feather & Black www.featherandblack.com6
ax2
bx2
cx2
ax2 ax4
bx2
bx4
b
h
cx2
cx4
c
f
ax2
bx2
cx2
d
x22
6.
hg x1x2
WAR
!NING! HAZARD DO NOT REACH INTO THE SPACE BELOW!
2mm
h
j
j
j
g
5.
j x2
K
L
Orla Ottoman Bed
Produced in China for Feather & Black www.featherandblack.com9
Orla Ottoman Bed
Produced in China for Feather & Black www.featherandblack.com7
2.
3.
dx1
c
b
a
Double & King x2
Super King x4
Double & King x2
Super King x4
Double & King x1
x3
Super King x2
Double & King x2
Super King x4
J
C
&
BE
D
ax2
d
bx2
cx2
Stack
H x2
H x2
4.
dx1
c
b
e
Double & King x12
Super King x16
Double & King x12
Super King x16
Double & King x12
Super King x16
SUPER KING:
DOUBLE & KING:
Double & King x3
Super King x4
ex4
bx4
cx4
Orla Ottoman Bed
Produced in China for Feather & Black www.featherandblack.com8
P
P
P
P
P
P
P
P
K
L
K
L
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

feather & black 251-01126 Assembly Instructions

Brand
feather & black
Model
251-01126
Type
Assembly Instructions
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents