ASSEMBLY INSTRUCTIONS
CARE INSTRUCTIONS:
WIPE CLEAN WITH A SOFT DAMP CLOTH. DO NOT USE SCOURERS, ABRASIVES OR CHEMICAL SOLVENTS TO CLEAN. CHECK AND TIGHTEN ALL PARTS REGULARLY. ENSURE PUNCHBALL
STAND IS CLEAN AND 100% DRY BEFORE STORING TO PREVENT MOULD AND MILDEW. STORE IN A DRY PLACE.
WARNING:
TO BE ASSEMBLED BY ADULT ONLY. STAND ON THE BASE TO FIX THE PRODUCT DURING USE.THIS PACKAGE CONTAINS SMALL PARTS AND SHARP POINTS. KEEP CHILDREN AWAY
WHEN ASSEMBLING. DO NOT LET CHILDREN USE THIS PRODUCT UNSUPERVISED. NOT SUITABLE FOR CHILDREN UNDER 3 YEARS. CHECK AND TIGHTEN ALL PARTS REGULARLY.
A Dia 10/50 1 pc
B Dia 15/35 1 pc
CM7 x 35mm 1 pc
ETool 1 pc
ToolF 1 pc
D 1 pcW24xH20mm
Spare part
1 1 pc 1 pc 1 pc
1 pc 1 pc 1 pc
2
4 5 6
3
Don't tighten the screws until the assembly is complete.
1
4
2
3
5
A
6
B
C
D
B
A
C
4
5
Step 1: Fix part 5 on part 4 with washers A & B, screw C (as per below
diagram).
Step 2: Tighten the part 3 on part 5 ( as
per below diagram).
Step 3: Fit part 6 into part 3, ensure the screw position of part 3 & 6
alignment, then put part 2 into part 6,
the height of part 2 can be adjusted by
moving part 2 to the maximum height
ensuring it needs to be adjusted above
the stop line, then use screw D to fix it.
Step 4: Tighten part 1 on part 2(as per below diagram).
4
3
2
6
1
D
5
3
stop
6
3
2
-
1
-
2
Kmart 42961222 User manual
- Type
- User manual
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Grizzly Industrial G1531 Owner's manual
-
Kellfri 21-SV500E Owner's manual
-
Grizzly Industrial G0839P Owner's manual
-
Grizzly G0898 Owner's manual
-
Woodstock W1854 Owner's manual
-
-
Grizzly Industrial G0811 Owner's manual
-
-
Grizzly W1865 Owner's manual
-
