MAONO WM760 A1 is a wireless handheld dynamic microphone system, perfect for home parties, karaoke singing, presentations, and meetings. With a range of up to 80 meters, you can move freely while using it. It features an easy plug-and-play operation, making it simple to set up and use. The system includes a handheld microphone and receiver with a 6.35mm microphone input plug for easy connection to speakers or amplifiers. The microphone has an all-metal body for a premium feel and a cardioid polar pattern for focused voice pickup and ambient noise isolation.
MAONO WM760 A1 is a wireless handheld dynamic microphone system, perfect for home parties, karaoke singing, presentations, and meetings. With a range of up to 80 meters, you can move freely while using it. It features an easy plug-and-play operation, making it simple to set up and use. The system includes a handheld microphone and receiver with a 6.35mm microphone input plug for easy connection to speakers or amplifiers. The microphone has an all-metal body for a premium feel and a cardioid polar pattern for focused voice pickup and ambient noise isolation.
MIC 2
ONOFF
MIC 1TF
Side Chain/
Music Only
REC/
PLAY
Mode/
LED
VOL
AUX
MIC ECHO
MIC VOL
USB
Hold for 3 seconds to turn the transmitter on/off,
When the transmitter is turned off, hold ” ”
and ” ”for 6 seconds to switch channels.
Note: WM760 A1 kit only include A channel,
B channel is unavailable.
Press it to increase volume by step by step, there
are 11 levels of volume, from U-00 to U-10.
Hold ” ”and ” ”for three seconds to enter
frequency switching mode, which will end
automatically after 10s. Press ” ”to move to next
frequency.
Press ” ”to exist frequency switching mode, or you
can wait it to end after 10s.
Press it to decrease volume by step by step, there
are 11 levels of volume, from U-00 to U-10.
Hold ” ”and ” ”for three seconds to enter
frequency switching mode, which will end
automatically after 10s. Press ” ”to move to
previous frequency.
Press ” ”to exist frequency switching mode, or you
can wait it to end after 10s.
Maono[ˈmɑnoʊ], meaning "vision" in
Kiswahili, is the Global Best Selling Internet
Microphone Brand that products are sold
well in 153 countries worldwide. With the
beau�ful vision of becoming a global
leading brand of Internet audio products
that deliver a pleasant sound experience,
Maono is always working with audio
professionals, influencers, and users, to
make the world's best microphones and
audio products.
GLOBALBESTSELLING
INTERNET MICROPHONE
Product Overview
Power button
Connection status meterd
Working frequency
Working channel
Battery power
Volume +
Volume -
Channel B indicator light
Channel A indicator light
Power indicator light
Power button
Front side
Front side Back side
Battery compartment
Back side
- Plug and Play.
- HD LED screen, real-time display of power, signal, frequency band
and volume.
- 11 volume levels delivers easy adjustment of volume.
- UHF wireless connection with 20 interference-free frequency
bands.
- Ultra-low latency.
- Up to 80m/262ft transmission range.
- Cardioid polar pattern with great focus on voice and isolation of
ambient noise.
- Custom dynamic transducer delivers high-definition sound quality.
- Features all-metal body, feels good in hand.
- Great compatibility with devices such as speakers, sound cards,
mixers, etc.
- Suitable for Karaoke, speech, and outdoor performance.
Product Use
Frequency Response
Polar Pattern
k
Operations of Transmitter Buttons
Product Features
Product Description
Maono WM760 handheld wireless dynamic microphone system
consists of a handheld microphone and receiver. The system features
plug-and-play easy operation, clear sound, reliable connection and a
nice looking. The system is with a range of up to 80 meters and is
specially designed for home parties, karaoke singing, presentations
and meetings. The handheld microphone is powered by 2 AA
universal batteries, which are easy to purchase and replace. The
receiver has a 6.35mm microphone input plug, which can be easily
plugged into the speaker for amplification. The system has 20
communication channels in different frequency, which effectively
avoid signal interference and deliver clearer sound. The product is
equipped with an LED screen that can display status information in
real time. There are single microphone and dual microphone versions
available for users to choose according to different needs.
Power
Button
Upper
Button
Lower
Button
Notes：1. When the device is turned on, there is ON on screen,
when the device is turned off, there is OFF on screen.
2. When there is no operation for 8 seconds, the device
will enter low power consumption mode, only shows
battery.
3. There are 20 features points in each channel.
902.5-912.0MHz for Channel A, 912.5-922.0MHz for
channel B.
Operations of Receiver Buttons
Power button
A/B Channel
indicator light
(Blue)
Power
indicator light
(Red)
Hold for 3s to turn on/off the receiver.
Steady LED light indicate enough battery.
Slow flashing LED light indicate failed device
connection.
Alternative slow and fast flashing LED light
indicates failed device connection and low
battery.
Steady light when the device is on.
Note：1 . When the receiver battery is low, Channel A/B blue
indicator light will flash fast until the device turns off.
2. If you get a WM760 A1 kit, the B channle indicator light
is off all the time.
1.5V AA 1.5V AA
Transmitter
Receiver
Product Specification
Frequency Response 50Hz~14kHz
Flexibility -40dBu/Pa
S/N 91dB
THD+N ＜1%
SPL 135dBSPL
Transmission Power 9dBm
Transmission Range ≥80m
Product Size Transmitter：248×51×51mm
Receiver：119×38×25mm
① Press power
button for 3s
to turn on
devices.
③ Hold the power
button for 3s,
there will be ON
on screen.
② After devices
turned on, the
blue indicator
light on Channel
on will blink
slowly.
④ Information
including battery
power, signal
connection
instruction,
working
frequency, and
working channel
will be displayed.
Instruction of pairing transmitter and receiver
Notes： In cases including two transmitters, the blue indicator light on
receiver Channel A/B will be steady blue. See picture below.
⑤ After the success pair of
the transmitter and the
receiver, there will be a
warning that channel A
is paired, and the blue
indicator light on
receiver Channel A is
steady on.
...
Handheld Wireless Microphone For Live
Performance
User Manual
Safety Statement
Although this product is designed to be used safely, failure to use it properly
may result in an accident. To ensure safety, please observe all warnings and
cautions when using the product.
Caution
- Do not subject the product to strong shocks to avoid malfunction.
- Do not disassemble, modify or attempt to repair the product.
- Do not handle the product with wet hands to avoid electric shock or
injury.
- Do not store the product in direct sunlight, near heating equipment or in a
hot, humid or dusty place.
- Do not place the product on an unstable surface to avoid injury or
malfunction caused by drops, etc.
- When using the product for a long period of time, the product may
become discolored due to UV rays (especially direct sunlight) and wear
and tear.
- When using the product, if you encounter any heat, smoke, odor, etc.,
please turn off the power in time and move the product to the dealer for
overhaul.
- This product should be used and stored in a dry, ventilated and safe
environment, please do not use this product in a humid and dusty
environment.
- Please avoid rain, dust into the product inside the product cause product
short circuit; near the fire source, collision, violent shock can cause
irreversible damage to the product.
- Please do not use the product in situations where it is explicitly prohibited
by law. Please observe the relevant safety regulations to use the product
safely to avoid accidents.
- Please confirm the positive and negative poles of the battery, do not
charge the battery, disassemble, fire, do not mix with old battery goods
different types of batteries, to avoid battery leakage or explosion.
- When not in use for a long time, please remove the battery to avoid
damage to the product circuit due to battery leakage.
- This product should not be used as a children's toy, please place it in a
location that is not accessible to children.
FCC Requirement
Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment. This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and
can radiate radio frequency energy, and if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
...
V1.1_20230605
Model : WM760
UK
Company: CET PRODUCT SERVICE LTD.
Address: Chase Business Centre, 39-41
Chase Side, London N14 5BP United Kingdom
Email: [email protected]
TEL: +447419325266
Company：Qing UG（haftungsbeschränkt）
Address: Undinestr. 7,12203 Berlin Germany
Tell: 004917662179550
E-mail: [email protected]
Technical support:
www.maono.com
Final clause
Information and data contained in this
manual are subject to change without
notice in advance.
We frequently update product firmware to improve user experiences and
performance.
The status display and operations may be slightly different among different
firmware versions.
For latest user manuals, please access on https://www.maono.com.
To get technical
support, please scan
the QR code
Battery compartment
Note: WM760 A1 kit requires four AA LR6 batteries
WM760 A2 kit requires six AA LR6 batteries
Note: WM760 A1 kit offers transmitter X1
WM760 A2 kit offers transmitter X2
Product installation and connection
Battery installation of the transmitter
Battery installation of the receiver
① Turn
transmitter’s
holder
counter-
clockwise
and take it
off.
② Put two AA
batteries to
battery
battery
compart-
ment.
③ Turn the
holder
clockwise
to tighten.
① Hold the
battery
compart-
ment cover
and pull it
down.
② Put two AA
batteries to
battery
compart-
ment.
③ Hold the
cover and
close the
compart-
ment.
6.35mm Plug
3.5mm Plug
lINE
Plug the receiver’s 6.35mm plug to audio interfaces,
speakers, or podcast studio.
Note: If you need to connect the receiver to
devices with 3.5mm audio jack, please plug the
receiver to 6.35TRS to 3.5TRS converter first, then
connect converter to microphone interface of
audio interfaces, or speakers. See the picture
below.
Connecting receiver to devices.
TRIM
HI
LOW
SEND
EFF
PAN
1
PFL
1
HI
LOW
+12
GRAPHIC EQUALIZER
EFFECT MAIN
PHONES
-12
0dB
+12
-12
70Hz 200Hz
LEFT RIGHT
1kHz 5kHz
DOWN
0dB=0dBuL R
+7
+4
0
-4
-7
+48V POWER
PHANTOM
SENDEFF
PEPEAT
MP3/AUX
VOL
PHONE LEVEL
L-R/PFL
UP
12kHz
0dB
SEND
EFF
PAN
1
PFL
1
CH2
MIC
lINE
CH1
MIC
lINE
MODE
AUX
LEFT LEFTAUX IN
RIGHT RIGHT
SEND OUT
MAIN OUT
REC
USB
MIC 2
ONOFF
MIC 1TF
Side Chain/
Music Only
REC/
PLAY
Mode/
LED
VOL
AUX
MIC ECHO
MIC VOL
USB
Frequency(Hz)
RMS Level(dBu)
50
-75
-70
-65
-60
-55
-50
-45
-40
-35
-30
-25
-20
-15
100 200 300 500 1k 2k 3k 5k 10k
-
1
MAONO WM760 A1 is a wireless handheld dynamic microphone system, perfect for home parties, karaoke singing, presentations, and meetings. With a range of up to 80 meters, you can move freely while using it. It features an easy plug-and-play operation, making it simple to set up and use. The system includes a handheld microphone and receiver with a 6.35mm microphone input plug for easy connection to speakers or amplifiers. The microphone has an all-metal body for a premium feel and a cardioid polar pattern for focused voice pickup and ambient noise isolation.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Sudotack SP-70 User manual
-
maano Podcast Console User manual
-
PHENYX PRO PTU-51 Eight Channels Wireless Microphone System Owner's manual
-
Okayo C 7312 Operating instructions
-
MASCOT RS-21B User manual
-
Mascot Electric JEBUST-6 User manual
-
Mipro MA-100 Series User manual
-
Altronics C8868C Operating instructions
-
TAG Bohemia 8 User manual
-
Pyle PDWM2120 User manual
