160525B16-2
WARNING: Burn Hazard.
Hot Surface Inside. Allow
to cool before opening for servicing.
WIRING
RED: To +VDC
BLACK: To Chassis Ground (-)
FP#
1 Rotator [R65]
FLASH PATTERNS
3 Bolt Mount
1. Drill holes on the mounting surface for the
wire-exit and mounting bolts.
2. Secure the beacon onto the mounting surface
with mounting bolts.
Mounting
Bolt
Beacon
Base
Mounting
Pad
Mounting
Nut
Mounting
Washer
Mounting
Surface
DIN Mount
Nut
Bolts
Washer
Mounting pole
(not included)
Magnetic Mount
WARNING:
It is not recommended to use magnetically
mounted warning devices on outside of
vehicle in motion. Usage is at the sole risk
and responsibility of the user.
(For moving vehicles, please use Power Mags)
Anti-scratch Pad
(for standard magnet)
LED Rotating Beacon
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
AeroWorks LC-126ARF-QB Assembly Manual
-
Mighty Mule Automatic Gate Opener SystemFOR DUAL SWING GATES Installation guide
-
Mighty Mule 350 Installation guide
-
Ventrac LW450 Owner's manual
-
Mighty Mule MM360-SOL Operating instructions
-
Ventrac KW450 Owner's manual
-
-
Harvest TEC 442P Installation guide
-
Vortech Superchargers 1999-2001 Ford 4.6L Truck/SUV Installation guide
-
JRC jlr-21 Owner's manual
