KMT 128g 89*127mm
Thank you for your purchase from Kmart.
Kmart Australia Ltd warrants your new product to be free from defects in
materials and workmanship for the period stated above, from the date of
purchase, provided that the product is used in accordance with the
accompanying recommendations or instructions where provided. This
warranty is in addition to your rights under the Australian Consumer Law.
Kmart will provide you with your choice of a refund, repair or exchange
(where possible) for this product if it becomes defective within the
warranty period. Kmart will bear the reasonable expense of claiming the
warranty. This warranty will no longer apply where the defect is a result of
alteration, accident, misuse, abuse or neglect.
Please retain your receipt as proof of purchase and contact our Customer
Service Centre on 1800 124 125 (Australia) or 0800 945 995 (New Zealand) or
alternatively, via Customer Help at kmart.com.au for any difficulties with
your product. Warranty claims and claims for expense incurred in
returning this product can be addressed to our Customer Service Centre
at 690 Springvale Rd, Mulgrave Vic 3170.
Our goods come with guarantees that cannot be excluded under the
Australian Consumer Law. You are entitled to a replacement or refund for
a major failure and compensation for any other reasonably foreseeable
loss or damage. You are also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable quality and the failure does
not amount to a major failure.
For New Zealand customers, this warranty is in addition to statutory rights
observed under New Zealand legislation.
12 month warranty
TWS Earphone
Operating instructions
Includes:
• TWS earphone
• Charging cable
Function overview:
How to use these earphones:
Specifications:
Model No : 43243273 Power ON / OFF
Power ON :
Removing Earphones
from charging case
will automatically turn
them on
Power OFF :
Placing Earphones into
charging case will
automatically turn them off
Bluetooth Version: V5.3
Function Operation
Play / Pause :
Siri :
Previous :
Next :
Volume up :
Touch either earbud
Long Touch either Left or Right earbud
Touch the Right earbud twice quickly
Triple-Touch Right earbud
Volume down : Triple-Touch Left earbud
Touch the Left earbud twice quickly
The Earphone LED indicator will turn off blue
once connected (Trouble shooting tip: if
the Earphones do not connect to your device,
turn the Earphones OFF, turn your device's
Bluetooth OFF and then back ON, then repeat
the pairing process) .
Pairing the Earphones with Bluetooth® devices
• Go to Bluetooth Settings on your Bluetooth
device (phone, tablet, etc.)
• Turn the Bluetooth ON on your device
• Remove the Earphones from the charging
case, ensuring both Earphones are turned ON
• Open the charging case and remove the
Earphones, they will automatically turn on (or
can be turned on manually). The LED indicators
on the left and right Earphones will flash blue
and red as they automatically sync to each other.
Once synced the Earphones will enter pairing
mode, which is identifiable by one Earphone
slowly flashing Blue while the other continues
to flash Blue and Red .
On your Bluetooth Device, select the pairing
name of your Earphones on the list of available
devices . Pairing name is: KM 43243273
Your Earphones are designed to automatically
sync to each other when turned ON, however
if they ever fail to sync , please follow the
below instructions to re-sync the left and
right Earphone
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth®
SIG, Inc., and any use of such marks by KMART AUSTRALIA is under license.
Support profiles:
Working Distance:
Music Time :
Talk time:
Standby time:
A2DP,AVRCP,HFP
10 meters
4 Hours
3 Hours
100 Hours
Charging voltage:
Battery capacity:
5V D.C
250mAh
Earphone Charge time:
Cable length:
Pairing window time:
1.5 Hrs
Charging time: 1.5-2 hours
30 cm
10 minutes
Non-connection automatic power-off
mode:
After 3 mins the earphone will automatically
switch off when no connection to the device.
• Touch both right and left Earphone in touch
area in 5 quick successions to re-sync the
earphone , a prompt voice alert then earphone
turn off, please repeat the above pairing process .
Click either the left or right earphone once to pause
playback, click either earphone once again to resume
playback. Press the left twice to play previous
track. Press the right twice to play next track.
Playing music
Battery Charging
Note: The charging case will stop working when
the battery is low.
In some cases if needed to cancel the
connection of left & right earbud ,touch the L & R
earbud 5 time in quick successions when they're
not connected with any devices (phone ,tablet,etc. )
Phone calls
When there is an incoming call, the unit will
pause the playback and ring to alert you of the
call. To answer the call, click the earphone .
To end a call, double-click the earphone To
decline an incoming call, press and hold either
earbud for 2 seconds.
Connect the USB-C charging cable into the socket
on the charging case.
When fully charged, unplug the charging cable
from the power socket.
Plug the cable into a standard USB 5V power output.
•
•
•
The LED indicator will flash Red while the case is
charging and will turn solid red when fully charged.
(Note: Before using the charging case for the first
time, we recommend you fully charge the battery.
A full charge takes around 2 hours).
•
•
LED indicator
Next song / Redial/ Calling (R)
LED indicator
Please touch operate in the
designated earbud position.
Play / Pause / Previous song (L)
Built-in microphone
USB charging port
RLL
WARNING:
• Battery cannot be subjected to high or low extreme temperatures, low air pressure at high
altitude during use, storage or transportation.
• Replacement of a battery with an incorrect type that can result in an explosion or the leakage
of flammable liquid or gas.
• Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery,
that can result in an explosion.
• Leaving a battery in an extremely high temperature surrounding environment that can result in
an explosion or the leakage of flammable liquid or gas.
• A battery subjected to extremely low air pressure that may result in an explosion or the
leakage of flammable liquid or gas.
• This product shall not be connected to power supply source exceeding PS1 . Rated 5V d.c. 1A .
• Marking information is located at bottom of the unit.
•
•
Please note the product working temperature is : 0-40 .
This TWS earphones shall be charged by the supplied charging unit only.
/
