Sealite SL-15 Installation guide

Brand: Sealite

Model: SL-15

Type: Installation guide

We Believe Technology Improves Navigation

Installation and

Service Manual

SL-15

Solar Marine Lantern 1 - 2NM+

with Adjustable Flash Settings

Version 4.01

2sealite.com

SL-15 Solar Marine Lantern

1 - 2NM+

Version No. Description Date Approved Design

4.0 Add Bluetooth and Sealite Pro June 2023 M. Nicholson M.Sharp

4.01 Remove Bluetooth due to supply issues January 2024 M. Nicholson M.Sharp

1.0 Manual Update Register

SL-15_NonBLE_Manual_EN_V4.01

SL-15

Solar Marine Lantern

1 - 2NM+

Installation and Service Manual

2.0 Contents

1.0 Manual Update Register ....................................................................................... 2

2.0 Contents ........................................................................................................... 3

3.0 Introduction ...................................................................................................... 4

4.0 Operating Principle ............................................................................................. 4

5.0 Technology ........................................................................................................ 4

5.1 Electronics ................................................................................................................................................... 4

5.2 LED Technology .......................................................................................................................................... 4

5.3 Precision Construction ............................................................................................................................... 4

5.4 Optical Performance ................................................................................................................................... 4

5.5 Award-winning, Patented Technology ......................................................................................................... 4

6.0 SL-15 Series ...................................................................................................... 5

6.1 Key Features ................................................................................................................................................ 5

6.2 Technical Data Sheet ................................................................................................................................... 6

6.3 Technical Drawing ........................................................................................................................................7

7.0 Installation ........................................................................................................ 7

8.0 Flash Codes ....................................................................................................... 8

8.1 Adjusting the Flash Code ............................................................................................................................. 8

8.2 Flash Code Table ......................................................................................................................................... 8

8.3 Selecting an Intensity/Power Setting ......................................................................................................... 8

8.4 Selecting a Flash Code- Rotary Switch ....................................................................................................... 8

9.0 Maintenance and Servicing .................................................................................. 9

9.1 Replacing the Battery ................................................................................................................................. 9

9.2 Long Term Storage Instructions (>4 weeks) ................................................................................................ 9

10.0 Troubleshooting ................................................................................................10

11.0 Optional ON / OFF Switch ...................................................................................10

11.1 ON/OFF Switch (SL-15-SW) ...................................................................................................................... 10

12.0 SL-15 Accessories .............................................................................................. 10

13.0 Sealite LED Light Warranty .................................................................................10

4sealite.com

SL-15 Solar Marine Lantern

1 - 2NM+

3.0 Introduction

Congratulations! By choosing to purchase a Sealite lantern

you have become the owner of one of the most advanced LED

marine lanterns in the world.

Sealite Pty Ltd has been manufacturing lanterns for over 25

years, and particular care has been taken to ensure your lantern

gives years of service.

As a commitment to producing the highest quality products

for our customers, Sealite has been independently certied

as complying with the requirements of ISO9001:2015 quality

management system.

Sealite lanterns comply with requirements of the US Coast

Guard in 33 CFR part 66 for Private Aids To Navigation.

By taking a few moments to browse through this booklet, you

will become familiar with the versatility of your lantern, and be

able to maximise its operating function.

4.0 Operating Principle

The solar module of the lantern converts sunlight to an

electrical current that is used to charge the battery.

The battery provides power to operate the lantern at night.

The asher unit has very low current requirements.

A microprocessor drives an ultra bright LED through a

DC/DC converter, which enables the LED’s to operate within

the manufacturer’s specications. The battery is protected

from over-charging within the circuit to ensure maximum

battery life.

On darkness, the microprocessor will initiate a program check

and after approximately 1 minute begin ashing to the set code.

5.0 Technology

Sealite is the world’s fastest growing manufacturer of marine

aids to navigation. We employ leading mechanical, optical,

hardware and software engineers to create innovative products

to service the needs of our customers worldwide, and oer the

widest range of solar-powered LED lanterns in the marketplace.

5.1 Electronics

Sealite employs leading in-house electronic engineers in the

design and development of software and related circuitry.

All individual electronic components are sourced directly by

Sealite procurement sta ensuring that only the highest quality

components are used in our products.

5.2 LED Technology

All marine lanterns use the latest advancements in LED (Light

Emitting Diode) technology as a light source. The major

advantage of LED’s over traditional light sources is well

established in that they typically have an operational life in

excess of 100,000 hours, resulting in substantial savings to

maintenance and servicing costs.

5.3 Precision Construction

Commitment to investing in the design and construction of

injection-moulded parts including optic lenses, light bases and a

range of other components ensures that all Sealite products are

of a consistent & superior quality.

5.4 Optical Performance

Sealite manufactures a range of marine LED lenses moulded

from multi-cavity dies. Complex shapes such as the SL-70,

BargeSafe™ and 16-segment multi-focus lenses are a testament

to the company’s superior in-house lens manufacturing

capabilities and outstanding optical performance.

5.5 Award-winning, Patented Technology

Several United States and Australian patent registrations

are held on Sealite’s range of innovative designs, with other

regional patents pending in Canada, United Kingdom and

Europe.

SL-15

Solar Marine Lantern

1 - 2NM+

Installation and Service Manual

6.0 SL-15 Series

The Sealite SL-15 1–2NM+ LED compact light incorporates

some of the most advanced technology available. Made from

tough, durable polycarbonate and using the latest high-

intensity LEDs, no expense has been spared in the design and

development of this lantern.

Installation takes just minutes, and a permanent ON/OFF,

accessible through the battery compartment, switch allows for

easy storage. The SL-15 is designed to be maintenance-free and

have a service life of over 3 years.

Internal Solar

Module

Bird Deterrent Spike

Automatic Night

Activation

Lens and Base Moulded

from UV-Stabilised

LEXAN® Polycarbonate

Internal user-adjustable

flash settings

LED Optic

Internal user-replaceable

battery in sealed compartment

6.1 Key Features

• User-adjustable ash characters;

• User-replaceable battery in sealed battery compartment;

• Installs in minutes and operates maintenance-free for

up to ve (5) years;

• Completely sealed and self-contained using

advanced UV-sealing;

• IP68 waterproof;

• NiMH battery for long service life and wide

temperature range; and

• Solar Powered.

6sealite.com

SL-15 Solar Marine Lantern

1 - 2NM+

6.2 Technical Data Sheet

• Specications subject to change or variation without notice

* Subject to standard terms and conditions

† Intensity setting subject to solar availability

^ Refer to the Sealite website under the warranty section

Light Characteristics

Light Source High Eciency LED

Available Colours Red, Green, White, Yellow, Blue

Typical Maximum Intensity (cd)†

Red - 6.2, Green - 7.6, White - 6.8, Yellow - 5.9

Visible Range (NM) AT @ 0.74: 1 – 2+

AT @ 0.85: 1.1 – 2.3+

Horizontal Output (degrees) 360

Vertical Divergence (degrees) 7

Reector Type Single LED Optic

Available Flash Characteristics 16 user-adjustable IALA ash characteristics (other ash patterns available on request)

Intensity Adjustments 32 automatic step-down settings based on power demand of ash code selection

LED Life Expectancy (hours) >100,000

Electrical Characteristics

Current Draw (mA) Refer to Sealite Power Calculator

Circuit Protection Integrated

Nominal Voltage (V) 3.6

Autonomy (days) >50 (14 hour darkness, 12.5% duty cycle)

Temperature Range -40 to 80°C

Solar Characteristics

Solar Module Type Monocrystalline

Output (Watts) 0.75

Power Supply

Battery Type High grade NiMH

Battery Capacity (Ah) 2.4

Nominal Voltage (V) 3.6

Physical Characteristics

Body Material LEXAN® Polycarbonate – UV-stabilised

Lens Material LEXAN® Polycarbonate – UV-stabilised

Lens Diameter (mm/inches) 98 / 37/8

Lens Design Single LED Optic

Mounting 4 x 6 mm mounting holes

Height (mm/inches) 141 / 5 1/2

Width (mm/inches) 136 / 5 3/8

Mass (kg/lbs) 0.5 / 1 1/8

Product Life Expectancy Up to 12 years^

Compliance

CE EN61000-6-1:2007. EN61000-6-3:2007

IALA Signal colors compliant to IALAE-200-1

Quality Assurance ISO 9001:2015

Ingress Protection IP68

Intellectual Property

Patents US Pat. No. 6,667,582. AU Pat. No. 778,918

Trademarks SEALITE® is a registered trademark of Sealite Pty Ltd

Warranty*3 years

Options Available • ON/OFF switch

• Custom ash patterns

• 50 mm pole mount adapter plate

SL-15

Solar Marine Lantern

1 - 2NM+

Installation and Service Manual

7.0 Installation

The SL-15 will be supplied preset to the requested ash code.

The light can be directly positioned in your desired location.

• Secure it, utilising the 4 x holes in the ange.

• Ensure the light is bolted to an even, at surface.

6.3 Technical Drawing

Charging the Battery

New lanterns should be left in the sun for 1-2 days

to ensure battery is charged before placing in service.

Please note, lantern will re-charge even when switch

is turned to ‘OFF’ position.

Preferred Installation Location

For best lantern performance, ensure solar modules

are not covered and are in clear view of the sky

with no shadows.

8sealite.com

SL-15 Solar Marine Lantern

1 - 2NM+

8.0 Flash Codes

8.1 Adjusting the Flash Code

1. Remove the 4 x battery cover screws and lift the cover and

battery out of the compartment to expose the adjustment

plug.

2. Unscrew the adjustment plug.

3. Using a small at bladed screwdriver adjust the

Flash Code to the desired setting.

4. Cover the light, in darkness, for at least 30 seconds to

activate the light sensor. Make sure the light is ashing

correctly.

5. Uncover the light and wait at least 30 seconds to make sure

the light turns o in daylight.

6. Insert the adjustment plug and replace the battery.

7. Replace the cover and secure using the 4 x screws.

Do Not over tighten screws.

8. Position the light in your desired location and secure,

utilising the 4 x holes in the ange.

Note: Ensure the light is bolted to an even, at surface.

8.2 Flash Code Table

8.3 Selecting an Intensity/Power Setting

Using the latest technology in software, the SL-15 automatically

adjusts the Intensity Setting when Flash Code is set.

8.4 Selecting a Flash Code- Rotary Switch

All SL-15 Lights are tted with a rotary switch. Turning the small

arrow to the appropriate number or letter will set the code

(see ‘7.1 Flash Code Table’ below). The unit may take up to one

minute to activate a new ash code.

Switch Position Flash Setting Duty Cycle

(%)

On (sec) O (sec)

0Steady On 100

10.5 1.0 33

20.5 3.5 12.5

31.0 3.0 25

40.5 5.5 8.5

50.3 0.7 30

60.3 (On), 0.7 (O), 0.3, 0.7, 0.3, 0.7, 0.3, 15.7 6.5

70.3 1.7 15

80.3 2.2 12

90.5 2.0 20

A0.3 2.7 10

B0.5 2.5 16.5

C0.7 2.3 23.5

D0.5 4.5 10

E1.0 4.0 20

FCustom Flash Code Position - (on request)

Battery Cover

Battery Cover Screw x 4

Battery Position

Battery Terminals

Adjustment Plug

(Removed)

Lantern Underside

OFF ON

Flash Code Adjustment

Switches

Toggle Switch

Rotary Switch

SL-15

Solar Marine Lantern

1 - 2NM+

Installation and Service Manual

9.0 Maintenance and Servicing

Designed to be maintenance free, the SL-15 requires minimal

attention, though the following maintenance and servicing

information is provided to help ensure the life of your Sealite

product.

1. Cleaning Solar Panels - occasional cleaning of the solar

panels may be required. Using a cloth and warm soapy

water, wipe o any foreign matter before rinsing the panels

with fresh water.

2. Battery Check - inspection of batteries should be performed

every two years (minimum) to ensure that the charger,

battery and ancillary electronics are functioning correctly.

Using a voltage meter, check that the battery voltage is at

least 3.6 volts under 50 mA load, and ensure all terminals

are clear of foreign matter.

9.1 Replacing the Battery

The SL-15 lantern is the only compact marine lantern with a

double sealed battery compartment. This provides the user with

the ability to change the battery after years of operation.

1. Remove the 4 x battery cover screws and lift the cover and

battery out of the compartment to expose the adjustment

plug

2. Unscrew the adjustment plug.

3. Use a small at bladed screwdriver to turn unit OFF.

4. Unscrew positive and negative battery leads.

5. Discard old battery in a safe manner. Please remember to

recycle where possible.

6. Reattach positive and negative leads to new battery and

then place back into case.

7. Switch lantern ‘ON’ via internal switch.

8. Cover the light, in darkness, for at least 30 seconds to

activate the light sensor. Make sure the light is ashing

correctly.

9. Uncover the light and wait at least 30 seconds to make sure

the light turns o in daylight.

10. Insert the adjustment plug and replace the battery.

11. Replace the cover and secure using the 4 x screws.

Care must be taken to observe the polarity of the battery

before the leads are re-connected, and ensure the replacement

battery is correctly tted. Always discard old batteries in a safe

manner.

9.2 Long Term Storage Instructions

(>4 weeks)

If light is required to be stored for longer than 4 weeks, please

turn the light o using the internal ON/OFF switch

(and external ON/OFF switch where tted).

1. Remove the 4 x battery cover screws and lift the cover and

battery out of the compartment to expose the adjustment

plug

2. Unscrew the adjustment plug.

3. Using a small at bladed screwdriver switch the ON/OFF

switch to the OFF position.

4. Insert the adjustment plug and replace the battery.

5. Replace the cover and secure using the 4 x screws.

Do Not over tighten screws.

6. Repeat these steps to re-activate your light when it is

removed from storage.

When tted with the optional External ON/OFF

switch, for correct operation of the External switch,

the Internal switch must be set in the OFF position.

If the Internal switch is set to the ON position, the

operation of the External switch is bypassed and

the lantern is ON.

All batteries will discharge over time and

the rate of discharge is dependent on

temperature. If the lantern is being stored in

temperatures greater than 40°C the battery

will discharge faster.

Please check battery every 3-6 months and

recharge if necessary.

10 sealite.com

SL-15 Solar Marine Lantern

1 - 2NM+

10.0 Troubleshooting

Problem Remedy

Lantern will not activate • Ensure internal toggle switch is set to the ‘ON position.

• Ensure lantern is in darkness.

• Wait at least 60 seconds for the program to initialise in darkness.

• Ensure switch setting is on a valid code

(See ‘7.1 Flash Code Table’ section of this manual).

• Ensure battery terminals are properly connected.

• Ensure battery voltage is above 3.4 Volts.

Timing codes will not change • Turn rotary switches several times to ensure contacts are clear.

Lantern will not operate for the

entire night

• Expose lantern to direct sunlight and monitor operation for several days. Sealite

products typically require 1.5 hours of direct sunlight per day to retain full autonomy.

From a discharged state, the lantern may require several days of operational conditions

to ‘cycle’ up to full autonomy.

• Reducing the light output intensity or duty cycle (ash code) will reduce current draw

on the battery.

• Ensure solar module is clean and not covered by shading during the day.

Lanterns are constantly on during

the day

• Ensure the ash code is not set to FF. This ash code is for testing purposes only and

will be steady on for 24 hours a day.

SL-15

Solar Marine Lantern

1 - 2NM+

Installation and Service Manual

11.0 Optional ON / OFF Switch

11.1 ON/OFF Switch (SL-15-SW)

An optional external ON/OFF switch can be installed on request

(additional charges will apply).

For correct operation of the EXTERNAL switch, the INTERNAL

switch must be set in the OFF position.

If the INTERNAL switch is set to the ON position, the operation

of the EXTERNAL switch is bypassed and the lantern is ON.

12.0 SL-15 Accessories

MC/02

Post mounting plate to suit

standard base SL-15

50mm ID

MC/04

Post mounting stand 50 mm OD post,

3-hole 200 mm OD base pattern

MC/05

90 degree wall mounting stand

50mm OD

MC/09

Buoy mounting plate to ax SL-15

lantern to:

SL-B600,

SL-B610; and

SL-B700 buoys

13.0 Sealite LED Light Warranty

Refer to Sealite website:

sealite.com

Sealite Head Oce

11 Industrial Drive, Somerville

Victoria, Australia 3912

T: +61 (0)3 5977 6128

F: +61 (0)3 5977 6124

Sealite UK

11 Pinbush Road, Lowestoft,

Suolk, NR33 7NL, UK

T: +44 (0)1502 588026

Sealite USA

61 Business Park Drive, Tilton

New Hampshire, USA 03276

T: +1 (603) 737 1311

F: +1 (603) 737 1320

Sealite Asia

8 Wilkie Road, #03-01

Wilkie Edge, Singapore 228095

T: +65 9119 8770

email: info@sealite.com

sealite.com

star2m.com

We Believe Technology Improves Navigation

Sealite SL-15 Installation guide

Sealite SL-15 Installation guide

Sealite SL-15 Installation guide

Related papers

Other documents