Ningbo 0116 User manual

Brand: Ningbo

Model: 0116

Type: User manual

Ningbo 0116 is a wireless charger designed for smartwatches. It features a compact and portable design, making it easy to carry around. With a maximum output power of 2.5W, it can quickly and efficiently charge compatible smartwatches. Simply connect the charger to a Type-C port of a qualified adapter with more than 1A output and place your smartwatch directly on top of the charging area. The charger is equipped with safety features to protect against overcharging and overheating, ensuring a safe and reliable charging experience.

USER MANUAL

65mm

90mm

What’s in the box?

1. Smart watch wireless charger*1

2. User manual*1

Overview

1. Wireless charging area

2. Type- C charging cable

Operation Instructions

1. Connect the Wireless Charger to a Type-C port of qualified

adapter with more than 1A output

2. To charge a smart watch, place it directly on top of the

charging

area. The smart watch will indicate it is charging.

Specifications:

1. Item :26512

2. Output power: Max.2.5W

3. Input: DC 5V / 1A

Attention:

1. Please avoid exposure, rain, water droplets, avoid prolonged

exposure to high temperature, high humidity environment.

2. Please use the qualified adapter which meets the requirements.

3. Do not drop or bump and applied heavy pressure to avoid

damage to the product.

4. Keep credit cards, pacemakers and other sensitive electronic

device away from the wireless charger.

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions:

(1)This device may not cause harmful interference, and

(2)This device must accept any interference received, including

interference that may cause undesired operation.

5. Do not use the charger outside the safe operating temperature

range of 32°F to 113°F (0°C to 45°C)

Do not place anything between the IWATCH being charged and

the charging area.

Use of the Made for Apple badge means that an accessory has

been designed to connect specifically to the Apple product(s)

identified in the badge, and has been certified by the developer

to meet Apple performance standards. Apple is

not responsible for the operation of this device or its compliance

with safety and regulatory standards. Please note that the use of

this accessory with an Apple product may affect wireless

RF󵜮Statement

FCC Radiation Exposure Statement:

The equipment complies with FCC Radiation exposure limits

set forth for uncontrolled enviroment. This equipment

should be installed and operated with minimum distance

20cm between the radiator and your body.

performance.

iPad, iPad Air, iPad Pro, iPhone,Apple Watch and Lightning are

trademarks of Apple Inc., registered in the U.S. and other

countries.

FCC ID:2ABHA0116 Made in China

Warning: Any changes or modifications not expressly approved

by the party responsible for compliance could void the user's

authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency

energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of

the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Ningbo 0116 User manual

Ningbo 0116 User manual

Other documents