De Dietrich DTI399XE1 Owner's manual

Guide d’utilisation et d’installation

de votre duo

table induction / hotte

FR

REF CONSTRUCTEUR 419

DTI399.......5,9 kW

230 V 50Hz

9962 7362 12/01

Installation and user guide for the

induction hob and hood

GB

Guia de utilização e de instalação

do seu duo

Placa de indução / exaustor

PT

Guía de utilización e instalación de

su conjunto inducción / campana

ES

99627361_ML_A.qxd 07/03/03 10:44 Page 1

Page is loading ...

9

mini 74 - maxi 103

70 mini

50

140,1 à 170,3

4 mini

56

4 m

ini

4 mini

=

21,6

49

- Table et hotte centrées.

- Installez d’abord votre hotte pour éviter tous risques de

détérioration de votre table.Vérifier la position du boîtier de

raccordement électrique, en essayant de dissimuler celui-ci

dans le corps de hotte.

cotes en cm

P

ositionnement

- Limitez au maximum le nombre de coude et la longueur de

la gaine.

Installez votre duo en toute sécurité

65

52

48,8

55,5

5,9

Fixez les clips sur la table

Un joint garantit l'étanchéité

avec le plan de travail.

-Ce joint est collé sous votre

table, insérez directement la

table dans la découpe.

-Ce joint est fourni dans la

pochette, collez celui-ci sous

la table .

99627361_ML_A.qxd 07/03/03 10:44 Page 9

Page is loading ...

12

3

2

1

4

NOTA

La taille de ces découpes

vous permet un réglage vers

la gauche ou vers la droite.

vis pour

Réglage de

hauteur hotte

vis pour blocage de la hotte

contre le mur

1

2

3

4

5

1

2

3

4

RECYCLAGE

clapet anti retours

adaptateur UNIQUEMENT

pour gaine de 12,5cm

Installez votre duo en toute sécurité

Retirez le film

protecteur des

cassettes.

Enlever les clips

de transport des

cheminées

EVACUATION EXTÉRIEURE

1

4

3

2

3

2

4

1

99627361_ML_A.qxd 07/03/03 10:44 Page 12

Utilisez votre table en toute simplicité

13

DTI 309

Ø 21 cm

50 W à 3100 W

Ø 18 cm

50 W à 2800 W

Ø 16 cm

50 W à 2000 W

Ø 18 cm

50 W à 2800 W

99627361_ML_A.qxd 07/03/03 10:44 Page 13

Page is loading ...

20

Comment entretenir votre hotte

Avant toute intervention, mettre la hotte

hors tension, soit en retirant la prise, soit

en actionnant le disjoncteur.

1. Retirez le hublot.

2. Changez la lampe halogène

type G4-20W-12V.

3. Replacez l’ensemble en effectuant

les opérations en sens inverse.

●

Changez les lampes

99627361_ML_A.qxd 07/03/03 10:45 Page 20

21

mettre les aliments

bouillir ou frire

cuisson vive

cuisson douce

bouillir avec couvercle

les puissances maximale sont réservées aux fritures et montées rapides à ébullition.

FRIRE CUIRE/DORER

PREPARATIONS

REPRISE D'EBULLITION

CUIRE/MIJOTER

PORTER À ÉBULLITION EBULLITION PETITS BOUILLONS

SOUPES

BOUILLONS

POTAGES EPAIS

POISSONS

COURT-BOUILLON

SURGELES

SAUCES

EPAISSE À BASE DE FARINE

AU BEURRE AVEC ŒUFS

(BEARNAISE, HOLLANDAISE)

LEGUMES

ENDIVES, EPINARDS

LEGUMES SECS

POMMES DE TERRE À L'EAU

POMMES DE TERRE RISSOLEES

POMMES DE TERRE SAUTEES

DECONGELATION DE LEGUMES

VIANDES

VIANDES PEU EPAISSES

STEAKS POELES

GRILLADE (GRIL FONTE)

FRITURE

FRITES SURGELEES

FRITES FRAICHES

VARIANTES

AUTO-CUISEUR (DES LE CHUCHOTEMENT)

COMPOTES

CREPES

CREME ANGLAISE

CHOCOLAT FONDU

CONFITURES

LAIT

ŒUFS SUR LE PLAT

PATES

PETITS POTS DE BEBE (BAIN MARIE)

RAGOUTS

RIZ CREOLE

RIZ AU LAIT

10

7 6 5 4 3 2

19

8

12-11

15-13

PUISSANCE SUR ZONE DE CUISSON

TENIR AU

CHAUD

TOUCHE BOOST

*

Pour les modèles équipés de la touche

boost réservé pour les fritures et ébulition

*

99627361_ML_A.qxd 07/03/03 10:45 Page 21

22

For any information on our products please contact us at :

De Dietrich UK Ltd

Intec 4

Wade Road

Basingstoke

RG24 8NE

tel : 01256 308000

Fax : 01256 346377

Dear Customer,

Thank you for buying a DE DIETRICH DUO.

Our research teams have designed a new generation of kitchen appliances. As a result

of our unique expertise, we have produced a range of goods whose quality, design and

technical advance are unsurpassed.

You will find that the clean lines and modern look of your DE DIETRICH hob blends in

perfectly with your kitchen décor. It is easy to use and performs to a high standard.

DE DIETRICH also makes a range of products that will enhance your kitchen such as

hobs, extractor hoods, built-in dishwashers and refrigerators. There are models to

complement your new DE DIETRICH hob.

Of course, we make every effort to ensure that our products meet all your

requirements, and our Customer Relations department is at your disposal, to answer all

your questions and to listen to all your suggestions (see back cover of manual).

DE DIETRICH is certain that by setting new standards of excellence by which

comparisons can be made, customers will find that De Dietrich appliances offer a better

and more exciting way of living.

DE DIETRICH.

99627361_ML_A.qxd 07/03/03 10:45 Page 22

23

In this Manual,

displays safety

instructions

displays tips and hints

Using your duo in complete safety.......................24

Installing your hob in complete safety................27

Using your hob in all simplicity...........................28

Using your hood in all simplicity.........................35

Preserving and maintaining your hob..................37

Preserving and maintaining your hood ...............39

Cooking............................................................41

List of contents

We have designed this hob for domestic use only.

With a view to constantly improving our products, we reserve the right to make technical and

programming changes or modify the appearance.

This hob is designed solely for cooking food. No asbestos has been used in its manufacture.

We suggest that you should periodically check that there are no objects (glass, paper, etc.) that could

obstruct the air inlet under your induction hob (See fitting).

The hood is completely automatic and controlled by the hob to adjust to your cooking power. You only

need to clean it regularly and change the recycling carbon filters (see the chapter on maintenance).

99627361_ML_A.qxd 07/03/03 10:45 Page 23

24

Using your duo in complete safety

HOB safety

•

A sensor continuously monitors the

temperature of the components of your hob.

The power output by the hob will automatically

be reduced if this temperature becomes

excessive.

•

You only have to remove the pan from the hob to

stop power instantaneously. Touch the "Off" touch

control to turn off the heating zone completely.

HOOD safety

The hood need cleaning regularly and the carbon

filter (recyclable) changed. This will avoid risks of

fire.

SAUCEPAN safety

Each unit is equipped with a sensor that

continuously monitors the temperature of the

bottom of the pan, so that overheating is

impossible (empty saucepan, etc.).

METALLIC OBJECT safety

A small object such as a fork, spoon or a ring

placed on your induction hob by itself is not

detected as a pan. The display flashes and there

is no output power.

Residual heat indicator

After intensive use, the cooking zone may

remain hot for several minutes.

The letter “

H”

is displayed during this period.

Do not touch the zones concerned.

Do not touch the zones concerned

Power used the heating zone

goes out automatically

after :

Between 1....9 8 hours

Between 10....14 2 hours

Between 15....Boost 1 hour

Automatic-Stop

Automatic-stop is a safety function for your hob. It

starts up automatically if ever you forget to turn

off after cooking :

The letter AS is displayed for the heating zone

concerned and the hob will bleep for about 2 mi-

nutes. The AS will continue to be displayed until

any control of the zone in question is touched. The

hob will then bleep twice to confirm your action.

Locked

Controls can be locked :

- either when turned off for cleaning,

- or during use (the operations in progress

continue and the settings displayed stay active).

However when in the locked position, the “STOP”

touch control has priority and cuts off the power to

the hob. The display turns off after a few seconds.

It can be reactivated by touching any touch control.

Remember to switch back on again before

use.

The illuminated key goes out after a few se-

conds. Touching the controls will cause the illu-

minated 0 to reappear.

3 , 4 s

bip

Unlocked

3 , 4 s

bip bip

Child safety

The hob has been fitted with a child-safety

device that prevents its use when locked.

99627361_ML_A.qxd 07/03/03 10:45 Page 24

25

Using your duo in complete safety

+

-

Induced currents

Electronic circuit

Induction coil

For the attention of wearers of pacemakers or other active

implants:

The hob complies with all current standards on electromagnetic interference.

Your induction hob is therefore perfectly in keeping with legal requirements (89/336/CEE directives). It

is designed not to create interference on any other electrical apparatus being used on condition that the

apparatus in question also complies with this legislation.

Your induction hob generates short-range magnetic fields.

To avoid any interference between your induction hob and a pacemaker, the latter must be designed to

comply with relevant regulations.

In this respect, we can only guarantee our own product conformity. Please consult the pacemaker

manufacturer or your doctor concerning its conformity or any possible incompatibility.

L

The principles of induction

When your induction hob is switched on and a

heating power has been selected, the electronic

circuits produce induced currents that

instantaneously heat the bottom of the pan that

transfers this heat to the food.

Thus cooking takes place with practically no ener-

gy loss between the induction hob and the food.

If a crack appears in the glass surface, disconnect the appliance immediately to avoid any risk of electric

shock.

For disconnecting, remove the fuses or use the cutout switch

Do not re-use your hob until the glass surface has been changed.

Never "flambé" dishes (set light to alcohol). (The flames sucked up by the hood will damage it).

Always keep a close eye on anything frying.

Repairs should only be carried out by a qualified specialist.

If you cook on a stove that has a chimney flue, install the hood so that it recycles the air.

Never use the hood without its metal filters.

The hob must not be used as a storage space for any products whatsoever.

Never allow power cables for other electrical appliances to trail across the hob.

When cooking never use aluminium foil and never place products wrapped in aluminium foil or products

deep-frozen in aluminium packs on the hob.

The aluminium will melt and damage your appliance irreparably.

If your hob is placed above your oven (see "Choice of Installation") thermal protectors prevent it being

used when the oven is being

pyro-cleaned.

99627361_ML_A.qxd 07/03/03 10:45 Page 25

26

Containers

You probably already have some suitable pans.

Your induction hob is able to recognize

most types of pans.

Pan test: Place your pan on a zone, for example

at position 4; you know that your pan is compa-

tible if the display does not flash, but if it does

flash then you cannot use this pan for induction

cooking.You can also test it with a magnet: if

the magnet "sticks" to the base of the pan, then

you can use it for induction cooking.

Pans compatible with induction are:

• pans made of enamel coated steel with or

without a non-stick coating.

• cast iron pans with or without enamel coated

base.

An enamelled coated base will prevent the glass

top of your hob from getting scratched.

• stainless steel pans designed for induction

cooking.

Most stainless steel pans (saucepans, stewpans,

frying pans, deep frying pans, etc.) are suitable

for induction cooking if they pass the pan test.

• aluminium pans with special base.

pans which do not have a flat base may be sui-

table, however they must not be badly deformed .

Choose a pan marked with the logo on

its base or packaging to be sure that it is per-

fectly suitable for use on your induction hob un-

der normal conditions of use.

A list of utensils is supplied with these

instructions to help you make your choice.

• Note

Glass, ceramic, earthenware pans, aluminium

pans (without a special base) and copper

pans, and some non-magnetic stainless steel

pans are incompatible with induction cooking.

You will be informed by the flashing display.

You should choose pans with a thick flat base for

uniform cooking (heat is better distributed).

Using the cooking zones according to the pan (

depending on the model)

Ø18 ..... 24 cm

Ø 21 cm

Ø 16 cm

Ø 18 cm

Ø12 ..... 22 cm

Ø10 ..... 18 cm

Slow cooking

(sauces, creams…).

Preparing small

quantities or

individual

portions…

Multi-service zone

For small pans

99627361_ML_A.qxd 07/03/03 10:45 Page 26

27

Installing your duo in complete safety

C

hoice of installation

Active carbon

filter ompulsory

EXTERNAL EXTRACTION

RECYCLING

Not supplied with the unit:

● The evacuation duct: it may be in Sheet enamel, aluminium, flexible or any non-inflammable

material and should be 15 cm or, if necessary, 12.5 cm in diameter.

● The active charcoal filter needed for hoods set up for air recycling

These filters are available at your retailers under the reference marked on the identity plate (see inside

the hood).

Outside

No outlet to

the outside

Extraction duct internal diameter 15 cm (or if this

is not available you may use a duct with an

internal diameter of 12.5 cm using the adapter

supplied with your hood).

● Hood

All our appliances can operate in the following modes:

99627361_ML_A.qxd 07/03/03 10:46 Page 27

28

● Hob

mini 5 cm

Kit d'isolation (SAV)

mini 4 mm

Above an oven

4 cm mini

Ensure that the unit crossbar does not block the air

passage, make a bevel if necessary.

Above a cupboard or drawer

unit

Gap

MINI 4 mm

If the appliance underneath your hob produces excess heat :

this will be detected by a safety device incorporated into your induction hob. A high temperature will be indicated by a

series of dashes or F7 will appear in the display.

If this happens we suggest you either create an opening in the side of the unit and/or install an insulation kit available

from the After-Sales Dept (ref 75X1652), which will protect your hob from the heat generated beneath it.

Providing the advice on ventilation given above is followed, your hob can be installed above any piece of kitchen

equipment.

Always ensure that the air vents beneath the hob are kept clear.

Your induction hob must always be adequately ventilated.

Opening in the side of the

unit approx 8 cm x 5 cm

Insulation kit (after-sales service)

99627361_ML_A.qxd 07/03/03 10:46 Page 28

29

mini 74 - maxi 103

70 mini

50

140,1 à 170,3

4 mini

56

4 m

ini

4 mini

=

21,6

49

- Centred hob and hood

- First of all install your hood to avoid any risk of damage to

your hob. Check the position of the electric junction box.

Try to hide this in the body of the hood.

dimensions in cm

P

ositioning

- You must not exceed the maximum number of bends or

the maximum length of the duct.

Installing your duo in complete safety

65

52

48,8

55,5

5,9

Fix the clips into position

A seal exists for preventing

any humidity getting under

the hob.

-Stick the seal under the rim

of the hob and lower the

hob into position on the

worktop.

-This seal is supplied in the

sachet; stick it in place

beneath the hob.

99627361_ML_A.qxd 07/03/03 10:46 Page 29

30

Your hood (230V, 50 Hz, 200 W) is supplied with

an H 05 VVF power cable with three 0.75 mm2

conductors (neutral, live and earth)

The fuse is 10 or 16 amps.

Neutral

Earth

Phase 2

Phase 1

N

L1

L2

Separate the 2 phase

wires L1 and L2 before

connecting

Blue

Green/yellow

- 400 V 2N three-phase

fuse : 16 Amp

This duo is delivered with type H 05 VVF power cable (1.5mm²) with 3/5 conductors (including a

green/yellow earth wire), which must be connected to the power supply via a plug that complies with pu-

blication CEI 83 or an all-pole cut-out unit with contacts that open by at least 3mm.

If the cable is damaged, it must be replaced by the manufacturers, their After Sales Service or another

similarly qualified person for avoiding any possible risk of accident.

When the power is switched on, or after a long power failure, a light code appears on the control panel.

This disappears automatically after about 30 seconds or as soon as any touch control is touched on the

panel. This is normal, as the display is for use by the after-sales service when required. The user must not

take this into account under any circumstances. If the unit has a 3 phase 400 V2N connection, and is not

working correctly, check that the neutral wire is correctly connected.

This precaution should also be taken for all your other electronic apparatus.

Brown

Connection

Installing your duo in complete safety

Neutral

Earth

Phase

N

L

- 230 V monophase

fuse : 32 Amp

Green/yellow

Blue

Black

Brown

Your hob is supplied with an H 05 VVF power cable

99627361_ML_A.qxd 07/03/03 10:46 Page 30

31

5

4

3

2

6

70...85 mm

=

diametre 8 mm

long 25

long 8

fourni

1

7

e

n

é

v

a

c

u

a

t

i

o

n

e

x

t

é

r

i

e

u

r

e

n

r

e

c

y

c

l

a

g

e

fourni

=

A

ssembling the main body of the hood

The unit must be installed in compliance with regulations in force concerning ventilation of

inside premises. In France, these regulations are to be found in DTU 61.1 of the CSTB. In

particular, any fumes evacuated must not be blown into ventilation, hot air, or fume

removal conduits.

Disused conduits are only to be used after approval from a specialist.

Installing your duo in complete safety

70 cm mini

Supplied

25 long

8 long

F

o

r

e

x

t

e

r

n

a

l

e

x

t

r

a

c

t

i

o

n

F

o

r

e

c

y

c

l

i

n

g

m

o

d

e

8 mm diameter

99627361_ML_A.qxd 07/03/03 10:46 Page 31

32

3

2

1

4

NOTE

The size of the cutouts

enables the hood to be

moved to the left or right.

screw for setting

the height of

your hood

screw for aligning the hood

against the wall

1

2

3

4

5

1

2

3

4

RECYCLING

clapet anti retours

Adaptor ONLY for use with a

duct Ø12.5 cm

Installing your duo in complete safety

Remove the

protective film on

the cassette

filters before

putting them back

in place.

Remove the

chimney transport

screws

EXTERNAL EXTRACTION

1

4

3

2

3

2

4

1

99627361_ML_A.qxd 07/03/03 10:46 Page 32

33

Using your hob in all simplicity

DTI 399

Ø 21 cm

50 W to 3100 W

Ø 18 cm

50 W to 2800 W

Ø 16 cm

50 W to 2000 W

Ø 18 cm

50 W to 2800 W

99627361_ML_A.qxd 07/03/03 10:46 Page 33

34

Using your hob in all simplicity

The hob bleeps and a 0 blinks to indicate that

the zone concerned has been turned on.

You can then choose the desired power.

If you do not set the power, the cooking zone

will turn itself off automatically.

0

1...15

Start/Stop

Setting power

If you use one of the rings at maximum

power on the induction side of the hob, the

other ring will automatically have its output

limited and the power displays will reflect this.

bip.

Low heat 7 = SIMMER

Moderate heat 11 = COOK

High heat 15 =

BRING TO BOIL

Maximum power bo BOIL

VIGOROUSLY

Operates when cooking zones concerned are

working. You can modify cooking times and any

time

0....99min

Setting the timer

To stop the beep touch any control key in the

cooking zone concerned. It will stop by default

after about 1 minute.

manual stopping

automatic stopping

0

7

bip bip

99627361_ML_A.qxd 07/03/03 10:46 Page 34

35

Hood infra red

control zone

DO NOT

O B S T R U C T

THIS AREA

B E T W E E N

THE TABLE

AND THE

HOOD

The hob has an infra red system (specially designed

for the hood) which controls the extraction power

automatically.

When the hob is switched on the light goes on and

the hood is in automatic mode: An A is displayed

on the hob.

The extraction speed of your hob changes

automatically depending on the cooking power you

have chosen.

In this mode you can change the setting on your

hood at any time depending on the specific

requirements of particular types of cooking (frying,

excessive steam etc.).

You can also use your hood in manual mode. The

extraction speed is entirely under your control. You

just need to choose the extraction setting by

pressing the buttons on your hob.

It is preferable to use the back cooking areas of

your cooker.

In manual mode:

We recommend that you use this from the time

you start cooking. When all the burners are off

the hood stops automatically after 1 - 4 minutes

depending on the extraction speed you have

chosen.

In automatic mode:

These criteria are taken into consideration by the

hob as the hood starts working as soon as the

cooking areas start to warm up.

Using your hood in all simplicity

99627361_ML_A.qxd 07/03/03 10:46 Page 35

Page is loading ...

De Dietrich DTI399XE1 Owner's manual

This manual is also suitable for

De Dietrich DTI399XE1 Owner's manual

in other languages

Related papers

Other documents