Valor BSK 790 Owner's manual

Category
Screen protectors
Type
Owner's manual

This manual is also suitable for

Valor BSK 790 for 790FTV is a barrier screen kit approved for use with the Valor Trim Models 790, 791, 792, and 798. It is designed to reduce the risk of burns from the hot viewing glass, especially for children and other at-risk individuals.

The barrier screen is easy to install. First, unhook the front trim from the fireplace. Then, hook the barrier screen to the fireplace side shrouds. Finally, hook the front trim to the shrouds in the same slots as the barrier screen.

The barrier screen is made of durable materials that will withstand the heat of the fireplace. It is also easy to clean. To clean the barrier screen, dust it with a soft brush. If the barrier becomes damaged, it should be replaced with the manufacturer's barrier for this appliance.

Valor BSK 790 for 790FTV is a barrier screen kit approved for use with the Valor Trim Models 790, 791, 792, and 798. It is designed to reduce the risk of burns from the hot viewing glass, especially for children and other at-risk individuals.

The barrier screen is easy to install. First, unhook the front trim from the fireplace. Then, hook the barrier screen to the fireplace side shrouds. Finally, hook the front trim to the shrouds in the same slots as the barrier screen.

The barrier screen is made of durable materials that will withstand the heat of the fireplace. It is also easy to clean. To clean the barrier screen, dust it with a soft brush. If the barrier becomes damaged, it should be replaced with the manufacturer's barrier for this appliance.

4003638-02
BSK790 Barrier Screen Kit
Installation Instructions
CSA approved for use ONLY with Valor Trim Models 790, 791, 792 and 798
Barrier screen
A Barrier Screen is being provided to you to install on your Valor Legend
G4 Floating Trims 790, 791, 792 or 798. The barrier screen is designed
speci cally to prevent any contact with the glass of the replace which
becomes hot during operation and remains hot when cooling.
INSTALLER
Leave this manual
with the appliance.
CONSUMER
Retain this manual
for future reference.
HOT GLASS WILL
CAUSE BURNS.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
WARNING
!
A barrier designed to reduce the risk of burns from the hot viewing
glass is provided with this appliance and shall be installed
for the protection of children and other at-risk individuals.
LEGEND G4
© Copyright Miles Industries Ltd., 2013.
2
Installation
1. Unhook the front trim from the replace.
2. Hook the barrier screen to the replace side
shrouds.
3. Hook the front trim to the shrouds in the same slots
as the barrier screen.
WARNING
DO NOT TOUCH THE BARRIER SCREEN OR
DO NOT TOUCH THE BARRIER SCREEN OR
FIREPLACE WHILE THEY ARE HOT!
FIREPLACE WHILE THEY ARE HOT!
Let the
Let the
fireplace cool first before cleaning it.
fireplace cool first before cleaning it.
FOR SAFETY PURPOSE, ensure the
FOR SAFETY PURPOSE, ensure the
barrier screen is re-installed on the
barrier screen is re-installed on the
fireplace front after maintenance.
fireplace front after maintenance.
WARNING
!
Maintenance
To clean the replace trim, use mild soap and water.
To clean the barrier screen, dust with a soft brush.
If the barrier becomes damaged, the barrier shall
be replaced with the manufacturers barrier for this
appliance.
To clean the window and ceramics inside the rebox,
consult the Owner’s Information section of the
Installation and Owner’s Manual supplied with the
replace.
DO NOT CLEAN THE GLASS WINDOW WITH
AMMONIA!
Designed and Manufactured by / for
Miles Industries Ltd.
190 – 2255 Dollarton Highway, North Vancouver, B.C., CANADA V7H 3B1
Tel. 604-984-3496 Fax 604-984-0246
www.valor replaces.com
Because our policy is one of constant development and improvement, details may vary slightly from those given in this publication.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Valor BSK 790 Owner's manual

Category
Screen protectors
Type
Owner's manual
This manual is also suitable for

Valor BSK 790 for 790FTV is a barrier screen kit approved for use with the Valor Trim Models 790, 791, 792, and 798. It is designed to reduce the risk of burns from the hot viewing glass, especially for children and other at-risk individuals.

The barrier screen is easy to install. First, unhook the front trim from the fireplace. Then, hook the barrier screen to the fireplace side shrouds. Finally, hook the front trim to the shrouds in the same slots as the barrier screen.

The barrier screen is made of durable materials that will withstand the heat of the fireplace. It is also easy to clean. To clean the barrier screen, dust it with a soft brush. If the barrier becomes damaged, it should be replaced with the manufacturer's barrier for this appliance.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages