Makita 5477NB Specification

Category
Circular saws
Type
Specification

Makita 5477NB hypoid saw boasts efficient hypoid gears for more power and surface contact, reducing maintenance needs. Its 0-51.5° bevel capacity with positive stops at 45° and 51.5° is ideal for truss and rafter cuts. The powerful 15 AMP motor enhances productivity, while the large cutting capacity (2-3/8" at 90°, 1-3/4" at 45°, and 1-9/16" at 50°) allows for versatile cutting.

Makita 5477NB hypoid saw boasts efficient hypoid gears for more power and surface contact, reducing maintenance needs. Its 0-51.5° bevel capacity with positive stops at 45° and 51.5° is ideal for truss and rafter cuts. The powerful 15 AMP motor enhances productivity, while the large cutting capacity (2-3/8" at 90°, 1-3/4" at 45°, and 1-9/16" at 50°) allows for versatile cutting.

7-1/4''
HYPOID SAW
MORE POWER. LESS MAINTE
NANCE.
TECHNOLOGY
TECHNOLOGY
Oil bath technology and sealed gear
housing for less maintenance
PERFORMANCE
PERFORMANCE
High qualit
y
,
hea
t treated hypoid gears
for long lasting performance
POWER
POWER
P
owerful 15 AMP motor for
increased productivity
CAPACITY
CAPACITY
0
o
- 51.5
o
bevel capacity with positive
stops at 45
o
and 51.5
o
ideal for
truss and rafter cut-outs
Model
5477NB
makitatools.com
EFFICIENT HYPOID GEARS DELIVER MORE POWER AND GREATER SURFACE CONTACT
THAN CONVENTIONAL WORM DRIVE GEARS
Large Cutting Capacity (2-3/8'' at 90
o
; 1-3/4'' at 45
o
and 1-9/16'' at 50
o
)
Lower Guard Design Improves Performance when making Bevel and Narrow Cuts
Oversized Top Handle for Better Fit and Added Comfort
Ideal for Framers, Builders, Masons, and Contractors
Model
5477NB
(0
o
- 51.5
o
)
EFFICIENT HYPOID GEARS DELIVER MORE POWER AND GREATER SURFACE CONTACT
THAN CONVENTIONAL WORM DRIVE GEARS
Large Cutting Capacity (2-3/8'' at 90
o
; 1-3/4'' at 45
o
and 1-9/16'' at 50
o
)
Lower Guard Design Improves Performance when making Bevel and Narrow Cuts
Oversized Top Handle for Better Fit and Added Comfort
Ideal for Framers, Builders, Masons, and Contractors
Blade diameter 7-1/4''
Arbor 5/8''
No load speed 4,500 RPM
AMPS 15.0
Max. cutting capacity at 90
o
2-3/8''
at 45
o
1-3/4''
at 50
o
1-9/16''
N
et w
eigh
t
13.9 lbs
.
Shipping weight 18.0 lbs.
UPC code 088381-096133
Carbide tipped blade (D-24826)
Blade wrench (783204-6)
Efficient hypoid gears deliver more constant power and greater surface contact than
conventional worm drive gears
Oil bath technology and sealed gear housing for less maintenance
0
o
- 51.5
o
bevel capacity with positive stops at 45
o
and 51.5
o
is ideal for truss & rafter cuts
High quality, heat treated hypoid gears are engineered for long lasting performance
Powerful 15 AMP motor for increased productivity
Large cutting capacity (2-3/8'' at 90
o
; 1-3/4'' at 45
o
and 1-9/16'' at 50
o
)
Lower guard design improves performance when making bevel and narrow cuts
Oversized top handle for better fit and added comfort
Large levers for fast bevel and depth adjustments
Push button spindle lock for easy blade changes
Blade wrench is attached to the saw for fast and convenient blade changing
Ergonomically designed rubberized grip improves control
Base plate is chemically treated to resist rust and warping for superior cuts
Reinforced 10 ft. cord withstands job site abuse and lowers repair costs
Large and easy-to-read markings on depth and bevel scales
Externally accessible brushes for easy replacement and extended tool life
24T thin kerf carbide tipped blade for fast cutting
Ideal for Framers, Builders, Masons and Contractors
All specifications subject to change without prior notice. All models and accessories subject to stock on hand.
NTF-0509-1 MA-0371-09 For more information, call
1-800-4MAKITA or visit makitatools.com
Makita U.S.A.,14930 Northam St., La Mirada, CA 90638
Model 5477NB
7-1/4'' HYPOID SAW
Makita offers a wide variety of accessories for Hypoid Saws. For a complete listing, please
refer to the Makita General Catalog, or visit our website at makitatools.com, or call 1-800-4MAKITA.
FEATURES & BENEFITS
FEATURES & BENEFITS
STANDARD EQUIPMENT
STANDARD EQUIPMENT
SPECIFICATIONS
SPECIFICATIONS
OPTIONAL ACCESSORIES
Model 5477NB
OPTIONAL ACCESSORIES
C
arbide-T
ipp
ed Saw Blades
5007F
AK, 5007FK,5007MG,
5007MGA,
5007NHK, 5277NB,
5377MG,
5477NB,5740NB
D
iamet
er
Blade Type No.Teeth Arbor Grind Part #
7-1/4" General Contractor 16T 5/8" ATB A-90009-B-10 (10/pk)
7-1/4" General Contractor 24T 5/8" ATB D-24826-10 (10/pk)
7-1/4" Framing 24T 5/8" "M" A-94839-10 (10/pk)
7-1/4" Coated Framing* 16T 5/8" ATB 721261-A-10 (10/pk)
7-1/4" Ultra-Coated Framing* 24T 5/8" "M" A-94530-10 (10/pk)
7-1/4" Fine Crosscutting 40T 5/8" ATB 721251-A
Model
*F
or pressure treated / wet lumber
  • Page 1 1
  • Page 2 2

Makita 5477NB Specification

Category
Circular saws
Type
Specification

Makita 5477NB hypoid saw boasts efficient hypoid gears for more power and surface contact, reducing maintenance needs. Its 0-51.5° bevel capacity with positive stops at 45° and 51.5° is ideal for truss and rafter cuts. The powerful 15 AMP motor enhances productivity, while the large cutting capacity (2-3/8" at 90°, 1-3/4" at 45°, and 1-9/16" at 50°) allows for versatile cutting.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI