Operating manual 3015
Operating manual Basic-Terminal Air Luggage 3015 Version V1.0 Date: 31.08.07 Page 3 of 4
No part of this document may be reproduce, stored in information retrieval systems, or transmitted, in any form or by any means- electronic, mechanical, photocopying, recording, or otherwise (German Civil Code)
Soehnle Professional GmbH
Soehnle Professional GmbHSoehnle Professional GmbH
Soehnle Professional GmbH & Co. KG
& Co. KG & Co. KG
& Co. KG | Postbox 1308 | D-71536 Murrhardt | Phone+49 (0) 7192 / 9319 – 0 | E-Mail info@soehnle-professional.com
Malufunctions causes and how to eliminate them:
Indicator
Elimination
- - O - -
The scale sets the value zero
automatically when it is switched
on. If the scales are outside the set
tolerance range - - 0 - - is displayed
Remove the items and if necessary
also the dirt from the weighing
platform. If the scale does not indicate
zero after a couple of seconds, you
should contact your service partner
_ _ _ _ _ _
Underload: Only the bottom
horizontal lines appear on the
display
Switch the scales off and on again. The
zero point will be reset automatically.
¯ ¯ ¯ ¯ ¯ ¯
Overload: Only the top horizontal
lines appear on the display. The
maximum weighing range has
been exceeded.
Remove some of the items from the
weighing platform.
E r r 5
The zero setting range has been
exceeded
Bei allen anderen ERROR- Meldungen
verständigen Sie bitte Ihren Service- Partner