Festool MFT 1080 User manual

Brand: Festool

Model: MFT 1080

Type: User manual

AVAILABLE THROUGH:

Your Festool dealer, or

Festool USA/Tooltechnic Systems, LLC

140 Los Carneros Way, Goleta, CA 93117

Phone: 888.337.8600 • Fax: 888.550.6425

www.festoolusa.com

The MFT connectors fit the

“T” slots around the

perimeter of the MFT

PRODUCT INFORMATION

MFT table connector

Item No. 484 455 (pack of 1)

2 are needed to connect 2 tables together

The MFT connectors (on

the outside) are thicker

than the guide rail

connectors

Two 1080 MFT’s joined

together side by side to

form a large work surface

Two 1080 MFT’s joined

together end to end to

form a long work surface

PRODUCT DESCRIPTION:

The MFT table connector can be used to connect

2 or more Multi-Function Tables to get a larger

work surface. These strong metal bars with 4 set

screws slide into the “T” track spanning the tables

to be joined as shown below.

SUGGESTED USAGE:

For big jobs where a large surface with very versatile

clamping options is needed. MFT’s can also be joined

together and be used with a long guide rail

(e.g. FS 1900/2) to increase the cutting

capacity of the MFT.

BENEFITS:

• Large work surface that supports big work

pieces – secure working environment can

enhance working speed and results.

• Increases cutting capacity of single MFT’s and

makes them more versatile – better use of

existing equipment

• Sturdy construction and high quality materials –

long product lifetime saves on replacement costs.

Festool MFT 1080 User manual

Festool MFT 1080 User manual

Festool MFT 1080 User manual

Related papers

Other documents