Ford Mountaineer Owner's manual

Introduction 4

Instrument Cluster 12

Warning and control lights 12

Gauges 18

Entertainment Systems 21

AM/FM stereo with CD 21

AM/FM stereo cassette with CD 25

AM/FM stereo with in-dash six CD 29

Climate Controls 35

Manual heating and air conditioning 35

Automatic temperature control 37

Auxiliary passenger climate control 40

Rear window defroster 41

Lights 42

Driver Controls 53

Windshield wiper/washer control 53

Steering wheel adjustment 54

Power windows 58

Mirrors 60

Speed control 61

Message center 71

Locks and Security 101

Keys 101

Locks 101

Anti-theft system 104

Table of Contents

1

Seating and Safety Restraints 117

Seating 117

Safety restraints 129

Airbags 144

Child restraints 158

Tires, Wheels and Loading 173

Tire Information 175

Tire Inflation 178

Tire Pressure Monitoring System (TPMS) 189

Vehicle loading 194

Trailer towing 201

Recreational towing 207

Driving 209

Starting 209

Brakes 212

Traction control/AdvanceTrac 214

Transmission operation 219

Roadside Emergencies 237

Getting roadside assistance 237

Hazard flasher switch 239

Fuel pump shut-off switch 239

Fuses and relays 240

Changing tires 248

Lug Nut Torque 258

Jump starting 259

Wrecker towing 264

Customer Assistance 266

Reporting safety defects (U.S. only) 272

Table of Contents

2

Cleaning 273

Maintenance and Specifications 280

Engine compartment 282

Engine oil 285

Battery 290

Engine Coolant 292

Fuel information 298

Air filter(s) 311

Part numbers 311

Refill capacities 312

Lubricant specifications 314

Accessories 321

Index 323

including photocopying, recording or by any information storage and retrieval

system or translation in whole or part is not permitted without written

authorization from Ford Motor Company. Ford may change the contents without

notice and without incurring obligation.

Table of Contents

3

CALIFORNIA Proposition 65 Warning

WARNING: Engine exhaust, some of its constituents, and

certain vehicle components contain or emit chemicals known to

the State of California to cause cancer and birth defects or other

reproductive harm. In addition, certain fluids contained in vehicles and

certain products of component wear contain or emit chemicals known

to the State of California to cause cancer and birth defects or other

reproductive harm.

CONGRATULATIONS

Congratulations on acquiring your new Mercury. Please take the time to

get well acquainted with your vehicle by reading this handbook. The

more you know and understand about your vehicle, the greater the

safety and pleasure you will derive from driving it.

For more information on Ford Motor Company and its products visit the

following website:

• In the United States: www.ford.com

• In Canada: www.ford.ca

• In Mexico: www.ford.com.mx

• In Australia: www.ford.com.au

Additional owner information is given in separate publications.

This Owner’s Guide describes every option and model variant available

and therefore some of the items covered may not apply to your

particular vehicle. Furthermore, due to printing cycles it may describe

options before they are generally available.

Remember to pass on the Owner’s Guide when reselling the vehicle. It

is an integral part of the vehicle.

Introduction

4

Fuel pump shut-off switch: In the event of an accident the

safety switch will automatically cut off the fuel supply to the

engine. The switch can also be activated through sudden vibration (e.g.

collision when parking). To reset the switch, refer to the Fuel pump

shut-off switch in the Roadside Emergencies chapter.

SAFETY AND ENVIRONMENT PROTECTION

Warning symbols in this guide

How can you reduce the risk of personal injury to yourself or others? In

this guide, answers to such questions are contained in comments

highlighted by the warning triangle symbol. These comments should be

read and observed.

Warning symbols on your vehicle

When you see this symbol, it is

imperative that you consult the

relevant section of this guide before

touching or attempting adjustment

of any kind.

Protecting the environment

We must all play our part in

protecting the environment. Correct

vehicle usage and the authorized

disposal of waste, cleaning and

lubrication materials are significant

steps towards this aim. Information in this respect is highlighted in this

guide with the tree symbol.

Introduction

5

BREAKING-IN YOUR VEHICLE

Your vehicle does not need an extensive break-in. Try not to drive

continuously at the same speed for the first 1,000 miles (1,600 km) of

new vehicle operation. Vary your speed frequently in order to give the

moving parts a chance to break in.

Drive your new vehicle at least 500 miles (800 km) before towing a

trailer. For more detailed information about towing a trailer, refer to

Trailer towing in the Tires, Wheels and Loading chapter.

Do not add friction modifier compounds or special break-in oils during

the first few thousand miles (kilometers) of operation, since these

additives may prevent piston ring seating. See Engine oil in the

Maintenance and Specifications chapter for more information on oil

usage.

SPECIAL NOTICES

New Vehicle Limited Warranty

For a detailed description of what is covered and what is not covered by

your vehicle’s New Vehicle Limited Warranty, refer to the Warranty

Guide that is provided to you along with your Owner’s Guide.

Special instructions

For your added safety, your vehicle is fitted with sophisticated electronic

controls.

Please read the section Supplemental restraint system (SRS)

in the Seating and Safety Restraints chapter. Failure to follow

the specific warnings and instructions could result in personal injury.

Front seat mounted rear-facing child or infant seats should

NEVER be placed in front of an active passenger airbag.

Introduction

6

Service Data Recording

Service data recorders in your vehicle are capable of collecting and

storing diagnostic information about your vehicle. This potentially

includes information about the performance or status of various systems

and modules in the vehicle, such as engine, throttle, steering or brake

systems. In order to properly diagnose and service your vehicle, Ford

Motor Company, Ford of Canada, and service and repair facilities may

access vehicle diagnostic information through a direct connection to your

vehicle when diagnosing or servicing your vehicle.

Event Data Recording

Other modules in your vehicle — event data recorders — are capable of

collecting and storing data during a crash or near crash event. The

recorded information may assist in the investigation of such an event.

The modules may record information about both the vehicle and the

occupants, potentially including information such as:

• how various systems in your vehicle were operating;

• whether or not the driver and passenger seatbelts were buckled;

• how far (if at all) the driver was depressing the accelerator and/or the

brake pedal;

• how fast the vehicle was traveling; and

• where the driver was positioning the steering wheel.

To access this information, special equipment must be directly connected

to the recording modules. Ford Motor Company and Ford of Canada do

not access event data recorder information without obtaining consent,

unless pursuant to court order or where required by law enforcement,

other government authorities or other third parties acting with lawful

authority. Other parties may seek to access the information

independently of Ford Motor Company and Ford of Canada.

Introduction

7

Notice to owners of pickup trucks and utility type vehicles

Utility vehicles have a significantly higher rollover rate than

other types of vehicles.

Before you drive your vehicle, please read this Owner’s Guide carefully.

Your vehicle is not a passenger car. As with other vehicles of this type,

failure to operate this vehicle correctly may result in loss of vehicle

control, vehicle rollover, personal injury or death.

Be sure to read Driving off road in the Driving chapter.

Using your vehicle with a snowplow

Do not use this vehicle for snowplowing.

Your vehicle is not equipped with a snowplowing package.

Using your vehicle as an ambulance

Do not use this vehicle as an ambulance.

Your vehicle is not equipped with the Ford Ambulance Preparation

Package.

Cell phone use

The use of Mobile Communications Equipment has become increasingly

important in the conduct of business and personal affairs. However,

drivers must not compromise their own or others’ safety when using

such equipment. Mobile Communications can enhance personal safety

and security when appropriately used, particularly in emergency

situations. Safety must be paramount when using mobile communications

equipment to avoid negating these benefits.

Mobile Communication Equipment includes, but is not limited to cellular

phones, pagers, portable email devices, in-vehicle communications

systems, telematics devices and portable two-way radios.

A driver’s first responsibility is the safe operation of the vehicle.

The most important thing you can do to prevent a crash is to

avoid distractions and pay attention to the road. Wait until it is safe to

operate Mobile Communications Equipment.

Introduction

8

Middle East/North Africa vehicle specific information

For your particular global region, your vehicle may be equipped with

features and options that are different from the ones that are described

in this Owner’s Guide; therefore, a supplement has been supplied that

complements this book. By referring to the pages in the provided

supplement, you can properly identify those features, recommendations

and specifications that are unique to your vehicle. Refer to this

Owner’s Guide for all other required information and warnings.

Introduction

9

These are some of the symbols you may see on your vehicle.

Vehicle Symbol Glossary

Safety Alert

See Owner’s Guide

Fasten Safety Belt Airbag - Front

Airbag - Side Child Seat

Child Seat Installation

Warning

Child Seat Lower

Anchor

Child Seat Tether

Anchor

Brake System

Anti-Lock Brake System

Brake Fluid -

Non-Petroleum Based

Powertrain Malfunction Speed Control

Master Lighting Switch Hazard Warning Flasher

Fog Lamps-Front Fuse Compartment

Fuel Pump Reset Windshield Wash/Wipe

Windshield

Defrost/Demist

Rear Window

Defrost/Demist

Introduction

10

Vehicle Symbol Glossary

Power Windows

Front/Rear

Power Window Lockout

Child Safety Door

Lock/Unlock

Interior Luggage

Compartment Release

Symbol

Panic Alarm Engine Oil

Engine Coolant

Temperature

Do Not Open When Hot Battery

Avoid Smoking, Flames,

or Sparks

Battery Acid

Explosive Gas Fan Warning

Power Steering Fluid

Maintain Correct Fluid

Level

MAX

MIN

Emission System Engine Air Filter

Passenger Compartment

Air Filter

Jack

Check Fuel Cap

Low Tire Pressure

Warning

Introduction

11

WARNING LIGHTS AND CHIMES

Standard instrument cluster

Optional instrument cluster

Warning lights and gauges can alert you to a vehicle condition that may

become serious enough to cause expensive repairs. A warning light may

illuminate when a problem exists with one of your vehicle’s functions.

Many lights will illuminate when you start your vehicle to make sure the

bulb works. If any light remains on after starting the vehicle, refer to the

respective system warning light for additional information.

Note: Some Warning Lights will display in the Message Center as words

and function the same as the warning light.

Instrument Cluster

12

Note: Depending on which options your vehicle has, some indicators

may not be present in your vehicle.

Service engine soon: The Service

engine soon indicator light

illuminates when the ignition is first

turned to the ON position to check

the bulb. Solid illumination after the engine is started indicates the On

Board Diagnostics System (OBD-II) has detected a malfunction. Refer to

On board diagnostics (OBD-II) in the Maintenance and Specifications

chapter. If the light is blinking, engine misfire is occurring which could

damage your catalytic converter. Drive in a moderate fashion (avoid

heavy acceleration and deceleration) and have your vehicle serviced

immediately by your authorized dealer.

Under engine misfire conditions, excessive exhaust temperatures

could damage the catalytic converter, the fuel system, interior

floor coverings or other vehicle components, possibly causing a fire.

Powertrain malfunction indicator: Illuminates when a powertrain or a

AWD fault has been detected. Contact your authorized dealer as soon as

possible.

• Standard instrument cluster

• Optional instrument cluster

Brake system warning light: To

confirm the brake system warning

light is functional, it will

momentarily illuminate when the

ignition is turned to the ON position

when the engine is not running, or in a position between ON and START,

or by applying the parking brake when the ignition is turned to the ON

position. If the brake system warning light does not illuminate at this

time, seek service immediately from your authorized dealer. Illumination

after releasing the parking brake indicates low brake fluid level and the

brake system should be inspected immediately by your authorized dealer.

P!

BRAKE

Instrument Cluster

13

Driving a vehicle with the brake system warning light on is

dangerous. A significant decrease in braking performance may

occur. It will take you longer to stop the vehicle. Have the vehicle

checked by your authorized dealer.

Anti-lock brake system: If the

ABS light stays illuminated or

continues to flash, a malfunction has

been detected, have the system

serviced immediately by your

authorized dealer. Normal braking is still functional unless the brake

warning light also is illuminated.

Airbag readiness: If this light fails

to illuminate when ignition is turned

to ON, continues to flash or remains

on, have the system serviced

immediately by your authorized dealer. A chime will also sound when a

malfunction in the supplemental restraint system has been detected.

Safety belt: Reminds you to fasten

your safety belt. A chime will also

sound to remind you to fasten your

safety belt.

Charging system: Illuminates when the battery is not charging properly.

• Standard instrument cluster

• Optional instrument cluster

Engine oil pressure: Illuminates

when the oil pressure falls below the

normal range. Check the oil level

and add oil if needed. Refer to

Engine oil in the Maintenance and Specifications chapter.

ABS

Instrument Cluster

14

Engine coolant temperature: Illuminates when the engine coolant

temperature is high. Stop the vehicle as soon as possible, switch off the

engine and let cool. Refer to Engine coolant in the Maintenance and

Specifications chapter.

• Standard instrument cluster

• Optional instrument cluster

Never remove the coolant reservoir cap while the engine is

running or hot.

Low tire pressure warning:

Illuminates when your tire pressure

is low. If the light remains on at

start up or while driving, the tire

pressure should be checked. Refer

to Inspecting and Inflating Your Tires in the Tires, Wheels and

Loading chapter. When the ignition is first turned to ON, the light will

illuminate for 3 seconds to ensure the bulb is working. If the light does

not turn ON, have the system inspected by your authorized dealer. For

more information on this system, refer to Understanding Your Tire

Pressure Monitoring System in the Tires, Wheels and Loading

chapter.

Check fuel cap: Illuminates when the fuel cap may not be properly

installed. Continued driving with this light on may cause the Service

engine soon warning light to come on. Refer to Fuel filler cap in the

Maintenance and Specifications chapter.

• Standard instrument cluster

Instrument Cluster

15

• Optional instrument cluster

Speed control: Illuminates when

the speed control is activated. Turns

off when the speed control system

is deactivated.

O/D off: Illuminates when the

overdrive function of the

transmission has been turned off,

refer to the Driving chapter. If the

light flashes steadily or does not illuminate, have the transmission

serviced soon, or damage may occur.

AdvanceTract: Flashes when the

AdvanceTract with RSC system is

active. Illuminates solid when the

system has been disabled (by the

driver or as a result of a system

failure), refer to the Driving

chapter for more information.

All wheel drive (AWD):

Illuminates when AWD is engaged. If

the light fails to illuminate when the

ignition is turned ON, or remains on, have the system serviced

immediately by your authorized dealer.

Door ajar: Illuminates when the

ignition is in the ON position and

any door, liftgate or the liftgate glass

is open.

O/D

OFF

4x4

Instrument Cluster

16

Low fuel: Illuminates when the fuel

level in the fuel tank is at or near

empty (refer to Fuel gauge in this

chapter).

Low washer fluid: Illuminates

when the windshield washer fluid is

low.

Turn signal: Illuminates when the

left or right turn signal or the

hazard lights are turned on. If the

indicators stay on or flash faster, check for a burned out bulb.

High beams: Illuminates when the

high beam headlamps are turned on.

Key-in-ignition warning chime: Sounds when the key is left in the

ignition in the OFF/LOCK or ACCESSORY position and the driver’s door

is opened.

Headlamps on warning chime: Sounds when the headlamps or parking

lamps are on, the ignition is off (the key is not in the ignition) and the

driver’s door is opened.

Turn signal warning chime: Sounds when the turn signal lever has

been activated to signal a turn and not turned off after the vehicle is

driven more than 1–1/2 miles ((2.4 km).

Parking brake ON warning chime: Sounds when the parking brake is set,

the engine is running and the vehicle is driven more than 3 mph (5 km).

Instrument Cluster

17

GAUGES

Speedometer: Indicates the

current vehicle speed.

Engine coolant temperature

gauge: Indicates engine coolant

temperature. At normal operating

temperature, the needle will be in

the normal range (between “H” and

“C”). If it enters the red section, the

engine is overheating. Stop the

vehicle as soon as safely possible,

switch off the engine and let the engine cool.

Never remove the coolant reservoir cap while the engine is

running or hot.

Instrument Cluster

18

Odometer: Registers the total miles (kilometers) of the vehicle.

• Standard instrument cluster

• Optional instrument cluster

Refer to Message Center in the Driver Controls chapter on how to

switch the display from Metric to English.

Trip odometer: Registers the miles (kilometers) of individual journeys.

• Standard instrument cluster

Press the TRIP/RESET control once

to switch from the odometer to the

TRIP A feature. Press the control

again to select the TRIP B feature.

To reset the trip, press and hold the

control again until the trip reading is 0.0 miles.

• Optional instrument cluster

Press and release the message

center INFO button until TRIP A

mode appears in the display. Press

the control again to select the TRIP

B feature. Press the RESET button

to reset.

Tachometer: Indicates the engine

speed in revolutions per minute.

Driving with your tachometer

pointer continuously at the top of

the scale may damage the engine.

Instrument Cluster

19

Fuel gauge: Indicates

approximately how much fuel is left

in the fuel tank (when the ignition

is in the ON position). The fuel

gauge may vary slightly when the

vehicle is in motion or on a grade.

Refer to Filling the tank in the

Maintenance and Specifications

chapter for more information.

The FUEL icon and arrow indicates which side of the vehicle the fuel

door is located.

Instrument Cluster

20

Page is loading ...

Ford Mountaineer Owner's manual

This manual is also suitable for

Ford Mountaineer Owner's manual

Other documents